Bolt on shock mount relocaters install into factory rear shock mount locations to restore proper shock positioning. Moving the shock away from spring pads and the axle tube allows for axle rotation on lifted Jeeps.
After lifting my 2003 Rubi and adjusting the pinion angle. My rear shocks started hitting the lower brackets that hold the coil springs in place. This was a simple solution that pushed the rear shocks out a couple inches. Installation is simple and doesn't require drilling any new holes.
These are necessary if you get off into the rocks. Look under the rear of your TJ and see what the lowest points are. Bingo-the lower shock mounts.
Look under your TJ. The rear lower shock mounts will not last in the rocks if you are aggressive. These brackets are very necessary. And practical. They also line the shock back up, increasing overall strength.
They are great mounts. The only reason I knocked off a star is the description says the put the shock back further, they do not. They put the shock in the same exact position bas the stick mounts.
Used these to adjust the position of the lower shock mount on our ‘03 TJ, after replacing the shocks and having to use the upper mount replicators due to broken mounting studs.
Q: Will this fit a (R/ERXT2410B)? I ordered a RE 3.5in lift for my cherokee and the rear shocks don't come with bar pins. Answer this question
A: Yes these will work. Your shocks should have came with bar pins.
Answered by Kelly from 4WP Corporate Headquarters on 10/29/2020
Q: Whats the measurements hole to hole Answer this question
A: We need some more information. What shocks are you running? Please call our sales line for further assistance: Toll Free: 1-877-474-4821
Answered by Kelly from Ohio on 09/29/2020
Q: Can these be used to better locate rear shocks for a 4 inch lift? Answer this question
A: Hello Jeff, Yes, this relocation bracket will push the shocks away from the axle giving you less bind. Thank you.
Answered by RK on 09/27/2015
Q: what is the item dimensions, and are they sold as a pair? Answer this question
A: Rich- Thank you for your question. The Rubicon Express Rear Shock Relocators are sold as a pair. The distance eyelet to eyelet is 2.5 inches. They are specififly designed for the jeep tj rear shock mounts.
Answered by Mike on 05/05/2014
Q: how much length will they add Answer this question
A: Lucy- Thank you for your question. The Rubicon Express Shock Relocation Bracket Bolt-On Rear YJ/Pair does not add length to the shock. It mounts in the axle end of the shock mount to push the shock away from the axle tube to allow for axle rotation to align the pinion angle for a CV drive shaft.
Answered by Mike on 03/02/2014
Rubicon Express has such a strong commitment to producing high quality Jeep suspension systems that it offers a lifetime, transferable hassle free warranty on all its products. It is a true lifetime warranty that can be used by the original owner of the tenth owner of the Jeep. The warranty covers all components, even down to the Super-Ride bushings. Rubicon In addition, Rubicon Express offers a wide variety of builder parts for customizing a build. All builder parts use the highest quality materials, components and manufacturing processes, insuring the built out rig will perform at the highest level possible. Rubicon Express has anything the builder needs from axle bracket kits to HD superflex joints, super-ride bushing kits to control arm brackets and much more. Shop Rubicon Express Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!