Rubicon Express Degree Shim 2.5 Inch Wide X 8 Degree Steel - RE1469

universal fit logo


  • Rubicon Express | Part Number: R/ERE1469
  • Center Pins:Without Center Pins
  • Degree:8 Degree
  • Fitment:Universal Fit


We make these shims from solid steel for maximum durability. Designed to handle the rigors of trail use, these shims actually become part of the spring pack. Many other shims on the market float between the spring pack and the spring perch reducing the engagement of the center pin. Our design will not come loose or fall out. Can be used front or rear to set pinion angles. 2.5" wide springs only. Center pins not included


Did the job

Brought my driveline geometry right where it needed to be.

from Boston, MA |
Best way to go

I have a 1990 Toyota 4runner SAS with a dana 44 up front. The previous owner had not corrected the pinion angle, and welded the shock mount tabs directly on top of the housing. Under the truck, it appeared that the pinion flange pointed directly toward the back of the vehicle and at a downward angle. The custom front driveshaft that was sold with the truck would bind so bad, it could only be turned by pulling the shaft off. I bought these shims after measuring how much clearance I would have with the drag link on my TG high steer kit. After drilling the 1/4 hole out to 3/8, and after finding a longer bolt, these 8 degree shims pointed the pumpkin up just right to allow the front shaft from binding, even at full flex. Solid steel shims won't break like aluminum ones you find elsewhere. Don't be cheap, buy the steel shims you won't regret it. Also alot cheaper than having a shop cut and re weld all the mounts on your front dana.

from Oxnard ca |
comes as a pair! (2) A+ stuff!

Comes as a pair! thats 2 pieces, i had to wonder untill it came... Excellent quality and a nice high angle 8deg!

from Deep in the Heart of Texas |

Question & Answers

2 Answered questions

What is the height of the shim. The reason I ask is that I purchased a steel 8 degree shim from a fabricator in California but it was the same size as a 6 degree aluminum shim from Omix-Ada. That wouldn't work on my Jeep. I need a true 8 degree or at least the same size as the Aluminum Omix Ada 8 degree.

Asked by Madmike from Egg Harbor Township, NJ on

Hello They don't give us the dimensions of their shims. I know for a fact if they say they are 6 or 8 degree's they are. I have included Rubicon's phone number so you can get the spec's you need. (916) 858-8575

Answered by Rody from Egg Harbor Township, NJ on

what size is center pin hole?

Asked by XJ from on

Hello They hole is 5/16th but can be drilled out for large bolt sizes. Thanks

Answered by Rody from on


Rubicon Express has such a strong commitment to producing high quality Jeep suspension systems that it offers a lifetime, transferable hassle free warranty on all its products. It is a true lifetime warranty that can be used by the original owner of the tenth owner of the Jeep. The warranty covers all components, even down to the Super-Ride bushings. Rubicon In addition, Rubicon Express offers a wide variety of builder parts for customizing a build. All builder parts use the highest quality materials, components and manufacturing processes, insuring the built out rig will perform at the highest level possible. Rubicon Express has anything the builder needs from axle bracket kits to HD superflex joints, super-ride bushing kits to control arm brackets and much more. Shop Rubicon Express Now