A: Works on my 2014 JKU Rubicon with a 2 1/2” lift.  This is the shorter one with a 3 1/2” lift you might need the longer one.

A: Hello according to the Chrysler dealer we were told it is 1 1/4 inch socket required. You can remove it with a breaker bar or a long half inch drive ratchet. Thanks

A: Thanks for the inquiry Big Byrd, the Rubicon Express CV Drive Shaft part R/ERE1883-365 this part will bolt in with a part # R/ERE1810 new yoke.

A: Hello Yes this is the correct drive shaft as along as you have the manual transmission. You will also need the R/E RE1810 adapter.

A: Hello This is the shaft we use for the 6 inch kit. The best thing to do is measure your Jeep from transfer case to differential. The axles do get moved a small amount with the long arm kits so best to measure.

A: Hi ROGUE This shaft should be perfect for your application. the 36.5 inch measurement should be checked and be * or - 1" in length of what your Jeep is now Thank You