Rubicon Express Coil Spring Spacers

A: Negative, this is a TJ Spacer. Try: TeraFlex 0.5 Inch Rear Spacer Load Level Kit - PN: 1155120 or Fishbone Offroad 3/4" Rear Lift Kit - PN: FB47174 everything else is a front only lift.

A: Yes the Rubicon Express .75" Coil Spring Spacer Lift Kit - RE1320 will fix the rack issue.

A: Treb72, no you do not need longer control arms or any other mods.

A: Front only. We do not offer a rear 1.75” spacer for the JL.

A: Hey Brian, We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821 Thanks

A: Gundog, the Rubicon Express .75 Inch Coil Spring Spacer Lift Kit will give you around 3/4" of an inch of lift so if your Jeep is just unlevel then yes this will help. As for the front and rear if you want to level it you will only need to do the portion that is lower so that you bring the lower portion to the higher to level it out. Hope this helps!

A: Hi Paul The Front Coil Spring Spacers will only work on the front. They show RE1325 for rear that is 1 3/4 tall so that would raise the front some to level it out. Thanks

A: Hi Bizerho, This Rubicon Express 2.5 Inch Coil Spring Spacer Lift Kit for the Jeep JK Wrangler will enable you to use 35x12.50 tires, however you'll want aftermarket wheels with a better back spacing to help clear everything. Thank you for your inquiry.

A: Hello PaT, That is correct. Thank you for the question.

A: Hello 97XJ and thank you for your question! Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear can take a tire size of 30x9.50.

A: Felipe, the Rubicon Express 1.75 Inch Front Coil Spring Spacers will work with the stock shocks, but you can always upgrade to a lifted shok spec that covers a 2-3 inch lift. I hope this helps!

A: Hello syswayne, You have to remove the panhard/track bar, front shocks, steering stabilizer, sway bar links and support the front axle wile the vehicle is off the ground. Then you can remove the coil springs and install the spacers and reinstall all above mentioned parts. With basic hand tools and a floor jack it will take you a few hours in the driveway. Thank you.

A: Hello Frank, You fit a 255/75 tire when installing the Rubicon Express 2 Inch Front Coil Spring Spacers R/ERE1335 on your vehicle. Thank you.

A: Thanks for the inquiry country boi, the Rubicon Express 2 Inch Front Coil Spring Spacers part # R/ERE1335 we would have to say no we have no application for that vehicle.

A: Sir, track bar bracket is not needed. thank you for your question.

A: Sir, this kit will not fit a 99 Grand Cherokee. Thanks for your question.

A: sir, yes not a problem adding the spacer. thank you for your question.

A: Tim, this should be fairly easy. 1 jack up the Jeep and support it by the frame. 2 disconnect the sway bar links 3 disconnect the track bar at the axle side, make sure you have the axle supported through out all of this. 4 lower the axle down remove coil springs 5 install spacers at top of spring. 6 reverse the steps to put back together and you are good to go. Hope this helps! Jamie:4917

A: Hello JC, If you still have some front end sag this should help you out.

A: Hello Dingo Sorry for the slow response your question seems to have been lost in our system. The spacer can be added to the lift if you have enough shock travel. You didn't say what brand kit you have also. You would need to make sure the sway bar end links will work and the brake lines will work. Thanks

A: Hello Bud, Thank you for asking. You will need two of these http://jo.my/p4jckz

A: Thanks for the inquiry Smitty, the Rubicon Express 1.75 Inch Front Coil Spring Spacers part # R/ERE1325 longer shocks are highly recommended because you are lifting your suspension.

A: Hello WJ and thank you for your question! Rubicon Express 2 Inch Front Coil Spring Spacers is a spacer that goes on top of the stock coil springs.

A: If you add the 1.75" to your 2" kit to have a 3.75" total you will need basically all the parts out of a 3.5" to 4" full lift kit. Control arms, track bar drop, sway bar extensions, longer shocks and a pitman arm.

A: Hello Yes it will work on all the different models of your year.

A: Thanks for the inquiry 04 TJ, the Rubicon Express .75 Inch Coil Spring Spacers part # R/ERE1333 will work fine with your stock shocks, normally 0-1 inches of lift will work.

A: Hello T.J, The Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear will require additional parts to restore your drivetrain.

A: Hello Paige's Rubi and thank you for your question! Rubicon Express 2.5 Inch Front Coil Spring Spacers will lift your front end up without needing anything esle done to your Jeep. I hope my answer gets 4 Wheel Parts your business!

A: Hello Matt The spacer you need for the XJ is EXP PLJ09100 they are 1.75 inches.

A: Julio, Yes the Rubicon Express 2.5 Inch Front Coil Spring Spacers will provide you with a true 2.5" lift. Hope this helps!

A: Hello RedneckBo16, Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear Technical Details Fits 1997 to 2006 Jeep TJ Wrangler, Rubicon and Unlimited Mounting Location: Front or Rear Fits 1984 to 2001 Jeep XJ Cherokee Mounting Location: Front Fits 1986 to 1992 Jeep MJ Comanche Mounting Location: Front Fits 1993 to 1998 Jeep ZJ Grand Cherokee Mounting Location: Front or Rear Lift Height: 1.75 Inch Poly Coil Spring Spacers Color: Black Sold As: Pair

A: RatGirl, Thank you for your question. it is recommended to run longer shocks when raising the front end, especially if you go wheeling.

A: Hello Don, Rubicon Express .75 Inch Rear Coil Spring Spacers R/ERE1321 is a .75" spring spacer kit for a Jeep and will not fit a Toyota. There really isn't a lift kit that will stack on top of another lift kit. If you want to go with a larger then 3" lift, you would have to a whole new lift kit.

A: 04 TJ Thanks for your question. The Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear are pretty easy to install. You unbolt the axle end of your shock, disconnect your sway bar and droop out the front axle. Remember to place your jack stands under the frame, not the axle. With the coil retainer clip removed the spring should come loose. Replace your stock coil isolator with the spacer, then replace the spring and bolt it all back together.

A: Cash- Thanks for the question. The answer to your question is yes, and no. The Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear can be used with the 4 inch pro comp coil lift. The problem is that the 4 inch pro comp lift is not designed to work another 1.75 inches of lift. You will be pushing the track bars and control arms into angles that they are not designed to work. You could use drop brackets on the control arms. Your drive line angles will be maxed out so you will be looking to replace your drive shafts. The difference between 4 inches and 5 inches doesn't seem like much but it pushes other components beyond there designed capacity.

A: Hello Dans99XJ, Thank you for the question. Yes, they will fit with the factory coil springs and you will need new longer shocks.

A: Hello tony, Thank you for the question. Technical Details: Sold As: Pair

A: Gadszooks- Thanks for the question. The Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear ID is 2 inches the OD is 4.25 inches. It is 1.75 inches thick.

A: Remy- Thank you for your question. The Rubicon Express 2.5 Inch Front Coil Spring Spacers kit comes as a pair. This is a leveling kit and is front spacers only. The only thing needed to install the spacers is the spacers.

A: Big Jim- Thank you for your question. When installing the Rubicon Express 2 Inch Front Coil Spring Spacers you do not retain the stock coil pad. The Lift should be 2 inches over stock. Measure from the top of the tire to the the edge of the wheel well before and after the install.

A: Hello Rena, Thank you for your question. The Rubicon Express 2 Inch Coil Spring Spacer R/ERE1322 are for the Front of the vehicle.

A: Hello Gator, Thank you for the question. No, provided the factory coil spring retainer clip (Lower) and bump stop bell holders (Upper) are in place.

A: Hello gb78challenger, You will need to upgrade to a longer shock when you install the Rubicon Express 2 Inch Front Coil Spring Spacers R/ERE1335. Thank you for the email.

A: Hi Alley, after installing the Rubicon Express .75 Inch Rear Coil Spring Spacers it is recommended to have your Jeep aligned, but it is not absolutely necessary. If you have any other questions, please give me a call. Thanks.

A: Hello PFrizzle, You will retain the factory coil spring isolator with the Rubicon Express 1.75 Inch Coil Spring Spacer Front or Rear R/ERE1334. Thank you for the email.

A: Hello Dave, I suggest you remove the factory coil spring isolator and install the Rubicon Express .75 Inch Coil Spring Spacers R/ERE1333. Then re-install the factory coil spring isolator. This way the coil spring has it's natural seating position. Thank you for the email.

A: Beck, You can use your factory shocks with the Rear Coil Spring Spacers R/ERE1326. We suggest you upgrade to an aftermarket shock for a better ride quality on and off-road.

A: Rubicon Express Rear Coil Spring Spacers are sold as a pair. Thanks!

A: Hello, this is the front pair, you will only get two spacers and you use your factory stock spacers with the new pair od spacers.

A: With 3/4" of lift it should not require new shocks.