Overall it retains the stock rife quality but with 2 1/2 inches of additional height. The instructions are vague when it comes to installing the shock relocation brackets and rear spacers especially. The front spring spacers that arrived were different than those pictured in the directions. That along with 2 small pins in the spring isolator caused some concern. Luckily RC tech is available on saturdays so i was able to resolve the issue ( they changed the spacer part, but did not change the pictures in the instructions and i had to snop off the pins so isolators would set correctly on the spacers)i also had issues getting the rear springs back in. Instructions have them just going back in, which the fronts did, but not the rear. I looked to make sure i had disconnected everything noted in the instructions and i had. The rear springs just about fell out, but missed clearing rear perches by a couple of inches. Using a block of wood i wss able to use a ctow bar to compress the spings enough to get them back on. Install was harder than it needed to be, due to missomg details that wouldn't be difficult to add in. However, the ride quality is there and thr extra griuns clearance will reduce rock and otj3er obstacle contact on the trail