A: Here is what is included: Mounting Hardware | Stainless Steel, U-Shape Bracket (Excludes FM) | Solid Black Light Cover (Excludes FM) | Harness w/Switch | Deutsch Connector. Yes you can.

A: Hey Ing, the Rigid Industries SR-M Flush Mount Flood LED Light does not come with wiring and will be able to be hooked into stock wiring but you may need to cut the plugs off and splice the wires together. Thanks for your question.

A: Hey JeepFreak66, the Rigid Industries SR-M Series Hybrid Flood LED Light would be able to be wired that way. Thanks for your question.

A: Yllwjeeper, The Rigid Industries SR-M Series Hybrid Flood LED Light comes with the wiring harness. I hope this helps!

A: Hello Tony Yes you can tie them into the factory wiring. They have a low amp draw being LED so they won't overload the stock wiring. Thanks

A: Hello fast, Yes, the Rigid Industries SR-M Series Hybrid Flood Light RIG90211 will fit your vehicle application. Thank you.

A: Jeff, The measurements for the Rigid Industries SR-M Amber Flush Mount Spot LED Light 4 3/16" x 2 3/8" x 2 1/4". Please let us know if you have any other questions. Thanks!

A: Hi Nat The SR-M Series Hybrid Flood LED Light is 3 inch wide, 2 inch high, and 2 7/8 deep. It does not look like it would fit, you would have to modify fitment.. Thanks

A: Hi Jeff, This SR-M series light from Rigid is 3" wide and 2 1/2" tall. Thanks for the inquiry!

A: Hi deadbear The Rigid Industries SR-M2 Flush Mount Diffused Light, RIG93251 The light is 4 3/16" wide, 2 3/8" tall and 2 1/4 " deep. They stick out a 1/4" after installed. Thanks for the question.

A: Hello edward, Thank you for the question. With some modifications I see no reason you cant.

A: Hello Kranthi, This light should run on 12v dc

A: Hogo- Thank you for your question. The Rigid Industries SR-M Series Hybrid Flood Light do not come with switch and harness. They do come with 2 leads and mounting bracket. You can find a harness and switches here EXP76200.

A: Jason- Thank you for your question. The Rigid Industries SR-M2 Series Clear Driving Light is not DOT approved. The bracket is included. The wiring harness is not. I recommend using a relay kit, you can find one here http://jo.my/u43smd

A: David- Thank you for your question. Per Sherry at Rigid industries the Rigid Industries SR-M Series Hybrid Flood Light is not DOT approved for on highway use.

A: Hello Todd, Depth:2.44" x Width:3.00" x Height:2.063" Thank you for the email.

A: Kumar- Thanks for asking. the Rigid Industries SR-M Series Hybrid Spot Light is indeed a spot type light and does come with a harness ans a switch.

A: DRJKF- The dimensions for the Rigid Industries SR-M2 Flush Mount Driving Light are 2 3/8" Tall / 2 1/8" deep / 3 3/16" long

A: DRJKF- Thanks for asking. Here are the dimensions of the Rigid Industries SR-M Series Hybrid Flood Light: Width: 3" (3.000) Height: 2" (2.063) Depth: 2-4/9" (2.438)

A: Hi Tom, this product is not sold as a pair.

A: Hello, the dimensions of the Rigid SR-M Flush Mount Light are 4-5/16" long x 2-1/4" deep x 2-3/8" high. You will need a 4-5/16" x 2-3/8" mounting surface. Please let us know if you have any further questions, thanks.

A: Hello, the light is 3" inches wide by 2" inches high with the bracket. Thanks!