This lift was put on my truck about a week ago and it feels great and looks great!

Put the 3.5” SST lift on my stock 2020 Ram 1500 Laramie to fit larger tires and update the look. Added Bilstein 5100 shocks in the rear and running Nitto Recon Grappler 35x12.5 on stock 22” rims with no rubbing at all. Looks fantastic and handles great!

I'm super happy with the lift kit and the install! My truck looks great and still rides just as nice or better than stock! I left my stock, 20" wheels on there and had 35" Nitto Ridge Grapplers installed as well. There is no rubbing/trimming needed whatsoever with that setup. Note: I do not have the off road package which I've read may cause issues with this lift/wheel/tire combo. Overall, I couldn't be any happier with this lift!

I searched and searched but couldn't quite find any builds just like this but in the end I went with it and I couldn't be happier! I didn't really want my tires to be outside the fenders like most do. The Ride is INCREDIBLE, SOO Much More Control. Firmer YES. It took the BOAT Like feel out and Cornering is Much Better with a lot less Pitch and Roll. With My Build I wound Up ALMOST Exactly Level with 3 1/4" Lift in the Front Axle to Fender and 1" in the Rear Axle to Fender. With my Tires I have a Net 4 3/4" Front and 4" Rear Ground to Fender (Seems weird, RIGHT!) NO RUBBING SO FAR AT ALL. 2019 Ram 1500 Crew Cab Laramie 4x4 6'-4" Bed Bilstein 6112 Front - Clip #8 (MAX) *** So I Did NOT Use the Front Spring Spacer Bilstein 5100 Rear Nitto Ridge Grappler 35x11.8-R20 on STOCK RIMS I will be adding the Air Left Bags also as I do Tow a Boat and a Trailer and you can see in the One pick that with the Boat on I do have 2" of Sag so the Rear Bum Stop will have to be replaced. The ONLY Negative mark that I can give is that the Rear Bump Stop Spacers don't have quite the correct angle and there is only the one slotted hole. So 4.95 from Me. Two Thumbs Up Ready Lift ps, It JUST Squeaks in the Garage too @ 6'-10" to the Shark Fin

Got this kit put on my Ram along with some 35x12.50 on my stock 20’s. Couldn’t be happier.

Glad I went with this kit, after riding in trucks with other brand kits the ready lift 3.5 SST ride quality is by far the smoothest ride I am experiencing so far, hovers over bumps and haven't had an "ouch!" Moment hitting a bump! Great kit experience for your self! I am still running factory 20" wheels with 2" spacers for a nice stance and agressive look!

Just got this lift installed. Kept the stock wheels and put on LT275/65R20 tires with no issues. Added airlift airbags that go in the rear coil springs to help when under a load.

Very happy with the look and ride of my lift. Still in the process of deciding on new wheels and tires but the stance is awesome.