Rancho RS5000 Shock Absorbers

A: In the front I have 4 shocks in the front

A: 2004 Silverado 1500 Z71 4x4 - REAR SHOCK: (2) RS55198 | VEHICLE HEIGHT: 0" | STANDARD QUALIFIER: Front Spring Type: Torsion Bar | NON-STANDARD QUALIFIER: Except 4 Wheel Steering;without Electronic Ride Control Package (ZX3); FRONT SHOCK: (2) RS55265 | VEHICLE HEIGHT: 0" | STANDARD QUALIFIER: Front Spring Type: Torsion Bar | NON-STANDARD QUALIFIER: Except 4 Wheel Steering;without Electronic Ride Control Package (ZX3). Please call us Sales & Support - 877-474-4821

A: Thank you for the question. Additional vehicle information is needed. For shock absorbers on other manufacturers lifts, the shock absorber should be measured to ensure the compressed and extended lengths of the replacement shock absorbers are correct.

A: These shocks fit many vehicles, depending on lift size, vehicle make etc. Please call our sales line to give them your vehicle specs so they can get you the correct shocks for your applications Toll Free: 1-877-474-4821

A: Thanks for the inquiry Batman, the Rancho RS5000 Series Shock Absorber part # RANRS5274 the book calls for RANRS5001 front and RANRS5112 rear.

A: Thanks for the inquiry RICKY, the Rancho RS5000 Series Shock Absorber part # RANRS5186 this is correct for your application.

A: Hello Aarrgghh!!, We offer the 4 Pro Comp ES9000 Shock package for your vehicle application. The correct part number is S/DShockingES9000. Thank you

A: Thanks for the inquiry Oseph, the Rancho RS5000 Series Shock Absorber part # RANRS5273 I would recommend from Rancho either the 7000's or the 9000's for your vehicle.

A: Thanks for the question. You will want to contact us at 800-421-1050 for a price. Thank you

A: Hello Falcon-abba, the Rancho RS5000 Series Shock Absorbers will be a great fit for your vehicle. The 9000 shocks would give you a bouncy ride. Thank you for your inquiry.

A: Hello Tony and thank you for your question! For the Rancho RS5000 Series Shock Absorber, we would need the lengths of the shocks you need.

A: Hello Bigwhiteboy, Thank you for asking. Rancho only offers the RS9000xl series shocks for your vehicle.

A: Hello Beach, the Rancho RS5000 Series Shock Absorbers will work with your current spacer lift in the front. These will not lift the vehicle any higher than it currently sits. Thank you for your question.

A: Hello Elliot, the Rancho RS5000 Series Shock Absorbers are available for your vehicle with the dimension you are looking for. Thank you for your question.

A: These are for a honda crv not a pilot.

A: Thanks for the inquiry Kasey, the Rancho RS5000 Series Shock Absorber part # RANRS5267 14.43-22.87.

A: Hello Primal, the Rancho RS5000 Series Shock Absorber part# rs5145 will fit the front of the 4 runner. Thank you for your inquiry.

A: Hello Mike, Thank you for asking. The Rancho RS5000 Series Shock Absorber are available for your vehicle.

A: Hello Bob, the easiest way to tell the difference between the two shocks for your vehicle is that the back shocks are considerably longer. Thank you for your inquiry.

A: Hello Carl and thank you for your question! The Rancho RS5000 Series Shock Absorber RANRS5118 is for a Jeep not a Chevy. You could use RANRS5112 that will fit your "82 Chevy 3/4 Tom with a small lift. I hope my answer helps get 4 Wheel Parts your business.

A: Thanks for the question Herb, The RS5000 are the replacement to the stock shocks. An upgrade would be the Rancho RS9000XL. (attached link) http://jo.my/d8yl6y

A: Hello Jv, the Rancho RS5000 Series Shock Absorbers would be a great fit for your vehicle. We Also carry The Rancho Rs5000 replacement stabilizer for your vehicle. Here are some links to help you complete your purchase. shocks: http://jo.my/pabo40 and Steering stabilizer: http://jo.my/92z68o Thank you for choosing 4 wheel parts for all your suspension needs.

A: Hello D, the Rancho RS5000 Series Shock Absorber part# RANRS5385 will not fit your vehicle. Rancho does not offer a rs5000 for the rear of your Excursion. Thank you for your inquiry.

A: Dylan, Yes the Rancho RS5000 Series Shock Absorber will work on your truck with a 4" lift.

A: Mark, Whenever you install a strut like the Rancho RS5000 Series Strut Assembly shock boots usually are not used.

A: dragginmudflaps, Thank you for the question. Rancho RS5000 Series Shock Absorber part# RANRS5319 is the correct rear shock for your Tacoma. Rancho recommends the RS9000 series http://jo.my/dgwk5i to match the front Quicklifts. The RANRS5319 will work, they are just not adjustable.

A: Hello Ramair, the Rancho RS5000 Series Shock Absorber's will fit your vehicle. The correct number to use for your application is part# S/DShockingRS5000. Thank you for your inquiry.

A: Ernesto- Thank you for your question. The shock that will fit your 04 silverado is EXP915580.

A: Hello Josh, Rancho RS5000 Series Shock Absorber will give you a smoother ride and they will be long enough to work for your lift.

A: Josh, Thank you for asking. In order to get you the correct length, we will need your vehicles year, make, model and how many inches of lift you have. Or if you are looking for a set you might want to look into a set http://jo.my/iayd2l Once you order them you will be contacted by a sales rep to insure we get you the correct length.

A: Gabe- Thanks for your question. The Rancho RS5000 Series Shock Absorber are covered by a limited life time warranty. This covers manufacturer defect or workmanship.

A: Hello Rob, Thank you for the question. I suggest the part number S/DShockingRS5000. That will get you all 4 shocks with boots for your vehicle.

A: Nil- Thank you for your question. The RS5000 will not fit your 87 Toyota Tacoma Truck. I would recommend the ES9000 cound here http://jo.my/xysnxd

A: Dave- Thank you for your question. The RS5000 that will fit your 04 Jeep grand cherokee is RANRS5128 for the front and RANRS5260 for the rear. The difference is the front is a post or stem type top mount and the rear is loop loop. The RS5000 does qualify for the Shocking deals found here S/DShockingRS5000

A: Hello Tim, Thank you for the question. Yes, the Rancho RS5000 Series Shock Absorber RANRS5274 will fit your vehicle application.

A: Bricknd- Thank you for your question. The Rancho RS5000 Series Strut Assembly will not fit your 2004 Dodge Ram 1500 4x4. I recommend the Pro Comp MX6 adjustable found here http://jo.my/apdwuo part number EXPMX6104

A: Thank you for your question Mondo. The Rancho RS5000 Series Shock Absorber part number RANRS5233 is a single shock. If you are looking at a Shocking Deal Package then yes it would be 2 front and 2 rear.

A: Hello Tom, Yes, the RS5000 shock package will fit your vehicle application. This package gets you two front and two rear shocks with boots. Simply place your order here online and one of our service reps will contact you to confirm fitment before your order ships. This will ensure you receive the correct shock application the first time. Thank you for the email.

A: Hello douglas, Yes, the Rancho RS5000 Series Shock Absorber shock package will fit your vehicle application. This package gets you two front and two rear shocks with boots. Simply place your order here online and one of our service reps will contact you to confirm fitment before your order ships. This will ensure you receive the correct shock application the first time. Thank you for the email.

A: Hi Bruce The shocks will have different part numbers for the front and rear if you buy the shocking deal a reprehensive will contact you and get you the correct shocks for your vehicle and accommodate all your modifications. http://www.4wheelparts.com/search.aspx?Action=2&AnswerId=36927&SH=QT1zaG9ja2luZyBkZWFsc35CPXNob2NraW5nIGRlYWxzfkQ9MTJ_ST1EaXNwbGF5UHJpY2V_Sz00fkw9MX5NPTF_&SI=130d8f5b-1314-4ddb-a606-6952b352a360 Thank You

A: Hello rranger88, This specific Rancho RS5000 fits your vehicle in the rear with a 4 inch suspension lift. the correct part number is the Rancho RS5000 Series Shock Absorber RANRS5234 http://jo.my/915t0E Thank you for the email.

A: Hello J, Yes, the Rancho RS5000 Series Shock Absorber RANRS5187 will fit the 2000 TOYOTA 4RUNNER. Thank you for the email.

A: Hello Scott, The Rancho RS5000 Series Shock Absorber RANRS5274 is a Hydraulic shock. If it was a gas charged shock you would be correct. Thank you for the email.

A: Hello Dave C, The Rancho RS5000 Series Shock Absorber RANRS5757 will help suspension dampening on and off-road. I'd also suggest the rear Rancho RS5000 Series Shock Absorber RANRS5315 http://jo.my/rvtflp I would also suggest checking tire air pressure, this will effect the ride. Running a smaller tire aspect can also effect the ride. The lower the tire sidewall aspect of the tire the ride can become harsh. Thank you for the email.

A: Hello sirlloydfop, You will need to retain all the factory hardware to install this shock on your 2000 Jeep Grand Cherokee. Thank you for the email.

A: KBB, The Rancho Shock Absorber RANRS5262 Extension is 21.625 Inch and Collapsed is 13.375 Inch. Rancho offers a RANRS5255 and its 26.375 inches Extended and 15.750 inches collapsed. Here is a direct link to the RANRS5255 http://jo.my/ranrs5255

A: t-bone, Yes, You can get a Rancho RS5000 Shock Absorber RANRS5262 1" longer then the factory shock. Please give us a call 877-260-5452.