Rancho quickLIFT Loaded Strut Assembly

A: Thank you for the question. The largest recommended tire size is 285/70/R17. Thank you

A: The largest recommended tire size is 285/70/R17.

A: We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821

A: Found a Rancho Add-A-Leaf Kit - PN: RANRS70078 (Must Be Used with RS999922;Rear Kit Required to Level the Rear to the Front Height). The RS9000XL Series Rear Shock Absorber - PN: RANRS999314

A: Yes, 2015 Nissan Xterra PRO-4X is on the list.

A: Thank you for the question. Sorry, the Rancho RS999915 is cataloged for the RWD Pre-runner with 6-lug wheels, or a Base 4WD. Rancho currently does not catalog a Quick-Lift for this vehicle.

A: 4WD & RWD 6 Lug Wheels

A: Comes in pairs

A: Thank you for the question. The Rancho RS999949 is sold individually.

A: Thank you for the question. The RS999226 rear left and RS999180 rear right match with the RS999907/RS999908 front quick struts.

A: Rear Right Part Number: RANRS999180 | Rear Left Part Number: RANRS999226

A: Thank you for the question. Rancho catalogs RS999229 front and RS999185 rear for the 2003 Ford Explorer Sport RWD with no suspension lift.

A: USE: PN: RANRS999934 (POSITION: Rear Left) | PN: RANRS999905 (POSITION: Rear Right) || VEHICLE HEIGHT: 1.25"

A: Thank you for the question. The Rancho RS999949 is designed to be installed without additional lift components.

A: Please call us Toll Free: 1-877-474-4821

A: The Rancho RS999949 is packaged individually.

A: It does not

A: 2015 Silverado Z/71

A: What year is your truck? Please call Toll Free: 1-877-474-4821 with this information to verify fitment.

A: The Rancho RS999952 will raise the front suspension approx. 1.75 inches.

A: Gain is 1.75”

A: PN: RS999908 is the front right Loaded QuickLIFT, I would get a second opinion. 1.75" of lift shouldn't need control arms, unless yours are worn out.

A: Thank you for the question. The Rancho RS999950 is cataloged for this vehicle with the 3.0L with sub-models LT, LTZ, RST, and High Country (without Adaptive Control Suspension).

A: RS999949 RANCHO LOADED QUICKLIFT COMPLETE STRUT ASSEMBLY | Pre-assembled with coil spring and upper mount | All shocks sold individually.

A: Thank you for the question. Sorry, the Rancho RS999930 is only cataloged with the 5.7L engine and 4WD.

A: Thank you for the question. The Rancho RS999901 is sold individually.

A: Thank you for the question. The Rancho RS999907 is sold individually. It is cataloged for the front left. RS999908 is cataloged for the front right on the same vehicle.

A: Thank you for the question. The Rancho RS999907 is not intended to be used with additional lifts. Thank you

A: Thank you for the question. The Rancho Quick Lift is designed to raise the ride height. The strut alone RS999804 can replace the factory strut and use the OEM spring and upper mount to maintain current ride height.

A: Thank you for the question. The maximum tire size the RS999935 was developed for is 35/12.50/R18. Trimming and modification may be required to provide proper clearance.

A: Thank you for the question. The Rancho Quick Lift is designed to replace the factory strut assembly and raise the ride height. It is designed to be used without other lifts. The RS999921 and RS999937 cataloged for this vehicle without off road package will raise the factory height 1.75 inches.

A: Thank you for the question. The RS999949 is cataloged for 4WD, the RS999910 is cataloged for RWD. The struts, springs, and mounts are different.

A: Thank you for the question. The Rancho RS999950 will raise the front 2 inches. Rancho currently does not catalog a 5 inch lift for this vehicle.

A: RANRS999901 FITS: All 2013-07; w/o Air Leveling System; w/o Electronic Suspension; w/o GM Auto Track System; w/o Z71 Off Road Package.

A: YES

A: No this will not fit.

A: Vehicles with age or high mileage will settle over time. The RS999915 is a 2.75” lift that is tested on vehicles with new suspension components. To level the rear of vehicle, you can go with an a 2” rear block kit. Readylift makes a 2” block kit with u-bolts, #66-5002 and ARB/OME makes a Carrier Bearing drop kit, #FK29.

A: Yes these should work.

A: This part number is a loaded strut with coil. It will raise your vehicle 1.75”

A: It's not adjustable so its 2.25 above factory.

A: More info is needed, Please call our sales team for more information Toll Free: 1-877-474-4821

A: This is sold individually. It looks like Rancho discontinued the driver side front part number and says this part number will now fit both sides, front.

A: Yes this will fit. That is just a stock photo.

A: Unfortunately Rancho does not seem to list exactly what this part fits yet, but when searching their site for 2004 Explorer 2WD this does not come up, so no it does not fit.

A: This is not universal. It fits older truck coverage. Please contact support to fix your order Toll Free: 1-877-474-4821

A: Driver side was part number RANRS999938 but it looks to be discontinued. Please call our sales team for the alternative part number Toll Free: 1-877-474-4821

A: Nomad, unfortunately this Rancho Complete Strut Assembly is not compatible with your 2018 Ford Explorer Sport. Rancho currently doesn't have any leveling struts for your vehicle.

A: These will help but it will still squat. Please look into using airbags to help with the load you are hauling.

A: No, the Rancho RS9000XL Loaded QuickLift Complete Strut Assembly - RS999801 will not fit your vehicle.

A: I didn't need to. The puck is already pressed into the strut. It did a great job leveling my 2008 Tahoe.

A: Hi Chuck, The spring rate is not published by Rancho for the Rancho 1.25 Inch Loaded QuickLIFT struts. I would assume the same as factory, but the strut is designed to give 2.5-3 inch front lift.

A: Hello Kevin The RANRS999930 does not fit your truck. Your truck's front suspension is coil spring but is not a strut type. For your truck Daystar makes front coil spacers kits. DAYKC09102BK gives 1 inch of lift. DAYKC09103BK gives 1.5 inches of lift. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello Big T, Your vehicle requires one RANRS999930 (Front Right) and one RANRS999944 (Front Left). The rear we recommend part number RANRS999367. Thank you for the question.

A: Hello Leno, This is a great option to replace the factory struts, add lift and firm up the ride quality. Please note: two are required for the front of your vehicle. I also highly recommend pairing that with the RANRS7198 shocks. This will give you the best ride available. Thank you for the question.

A: Hello Chief, Your vehicle will require two RANRS999901 (Front) and two RANRS999297 (Rear). Largest tire you can fit with this package is a 33x12.50. Thank you for the question.

A: Hello Sean, The RANRS999922 is correct for the front of the vehicle. According to Rancho Suspension the RANRS999938 will not fit your vehicle. Thank you for the question.

A: Thanks fpr the inquiry n/a, the Rancho 2 Inch Loaded QuickLIFT part # RANRS999938 is incorrect, Rancho does not offer shocks for the rear of your vehicle.

A: Hello I checked and it seems the Navara is the same as our Frontier in the USA. Depending on the year yes it does fit the Navara. I looked it up for a 2013 Frontier not know what year your Nissan is. http://www.4wheelparts.com/Lift-Kits-Suspensions-Shocks/2-Inch-Loaded-QuickLIFT.aspx?t_c=1&t_s=90&t_pt=3306&t_pn=RANRS999938

A: Thanks for the inquiry Israel, the Rancho 2 Inch Loaded QuickLIFT part # RANRS999901 stacking leveling kits is something we can't do, it's one or the other.

A: Hello dtolcou, Yes, this will fit your vehicle application. This part number fits the front left and the RANRS999911 fits the front right on your vehicle. Thank you for the question.

A: Hello Serj, This will not fit your vehicle. The correct Rancho quickLIFT for your vehicle is part number RANRS7831. You will need to purchase two since they are sold single. They will provide a 2" front leveling kit. Please Note: Only fit vehciles w/o ZX3 Ride Control Package and w/o Quadrasteer. Thank you.

A: Hello Chris, Rancho offers a 90 day warranty against manufacturer defects. Thank you for the question.

A: Thanks for the inquiry Augie , the Rancho 2 Inch Loaded QuickLIFT part # RANRS999922 this is correct for your vehicle.

A: Hello colinstrs, This part number will only fit the front right of your vehicle application. This will not install on the left front. Thank you for the question.

A: Hello Smylinjim, Yes, this will fit your vehicle application. It's a direct bolt-on installation. Thank you.

A: Hello Jose, No, You can not add an any additional suspension lift to your 7.5" Rough Country lift kit. Adding additional lift will create harsh angles on the steering and CV axles causing premature failure. Thank you.

A: Thanks for the inquiry Bud, the Rancho 2 Inch Loaded QuickLIFT part # RANRS999911 these are for the front only but they are vehicle specific.

A: Hello Alejandro, Yes, this will fit your vehicle application. Provided your vehicle is NOT a the vehicles with Electronic Suspension, 4 Wheel Steering or Z71 Off Road Package. Thank you.

A: Hello Hey, Sorry but Rancon does not offer this for your vehicle application application at this time. Thank you.

A: Hello Mike, They are sold single. Thank you.

A: Thanks for the inquiry Skinny, the Rancho 2.25 Inch Loaded QuickLIFT part # RANRS999931 this is the right side, you'll need part # RANRS999923 left side and the rear is part # RANRS999324 x 2.

A: Hello Oilslick, Yes, this will fit your vehicle application. This specific part number is for the front Right side of the vehicle. You will also need the RANRS999944 for the front Left side of the vehicle. Please Note: This will not fit the Mega Cab or factory Air Suspension equip vehicles. I hope that clears up the confusion for you. Thanks for the question.

A: Hello Zach, You can not run a spacer on top of a lift strut. CV axle (If 4x4) and steering angles too drastic and will fail.

A: Hello zach, The Rancho 2 Inch Loaded QuickLIFT RANRS999938 are sold single. Thank you.

A: Thanks for the inquiry tnuc, the Rancho 1.75 Inch Loaded QuickLIFT part # RANRS999908 these are sold individually.

A: Hello Dempsey, Yes, they will fit but you will need to pay very close attention to the front CV axle (it 4x4) and steering angles. I would suggest the Bilstein 5100 Series since they have a few different lift height options.

A: Hello Michelle, None of the Rancho QuickLIFT's will work with autoride. Thank you.

A: Hello Dom, The Rancho 2 Inch Loaded QuickLIFT will not work on vehicles with Electronic Suspension, 4 Wheel Steering or Z71 Off Road Package. Thank you.

A: Hello Swanny, Rancho does not offer a QuickLIFT for the Toyota Tundra at this time.

A: Brian, you are correct it will fit a Z71 and regular 4wd we apologize for the confusion. Thank you for the question.

A: Sir, the loaded Quick lift is to be installed by its self and not to be stacked with a spacer. Hope this helps and thanks for your question.

A: Hello Walther, No, you can not stack a lift spacer of any size with these units. The issue becomes the steering angles when you do. The angles are so extreme they will fail with little to no use. Thank you.

A: Hello Relentless, The Rancho 1.75 Inch Loaded QuickLIFT shock valving is adjustable.

A: Thanks for the inquiry Joe, the Rancho 2.25 Inch Loaded QuickLIFT part # RANRS999937 normally we don't combine leveling because there is not enough adjustment for camber/caster adjustment for proper alignment.

A: Hello Harleyman and thank you for the inquiry on the Rancho Quick lift. Unfortunately, the Rancho quick lift will not fit a Z71 model per the manufacturer.

A: Hello Jason, you will need to remove your leveling kit if you would like to install the Rancho 1.75 Inch Loaded QuickLIFT. Thank you for your question.

A: Thanks for the question. Rancho 1.75 Inch Loaded QuickLIFT With these you should not need any lift for the rear of your vehicle. If you want to lift the rear you can go with an add a leaf. Thank you.

A: Hello Sean, Thank you for asking. The Rancho 2 Inch Loaded QuickLIFT part# RANRS999935 is the driver side. Part#RANRS999911 is the passanger side. 09-newer F-150

A: Hello there, the Rancho 2 Inch Loaded QuickLIFT will match up well with the RS5000 shocks on a 2009 Chevy Silverado. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello New Guy, Thank you for asking. With the Rancho 2 Inch Loaded QuickLIFT you should be able to clear 285/70/17 tires

A: Hello peter and thank you for your question! Rancho 2 Inch Loaded QuickLIFT has a dail on the side of the strut that would show you what setting it is at.

A: Hello Nick The Rancho 1.25 Inch Loaded QuickLIFT are sold individually.

A: Perry- Thank you for your question. The Rancho 2 Inch Loaded QuickLIFT is designed to fit the Left front of your 05 Nissan Frontier Nismo. If you would like to lift the rear of the truck I would recommend the Rev Tek 835 lift kit. It comes with strut spacers and rear blocks.

A: Yes this will work on your Suburban please contact your local store for installation.

A: Hello Makai and thank you for the inquiry on the Rancho 2 Inch Loaded QuickLIFT. The largest tire size that you could fit with this leveling kit installed would be a 35" tire. Your wheel will have to have at least 4.5 to 5" backspace. Here is the link to get y9u back to the ordering page: http://jo.my/t6jlow.qrcode

A: Hello Connor and thank you for your question. Rancho 2 Inch Loaded QuickLIFT are made for your 2007 Avalanche Z71, try RS999928.

A: Hello Brando, the Wireless system was to adjust the dampening of the shocks, unfortunately this system has been discontinued for about two years now. Thank you for your question.

A: Hello Cesar, The Rancho 2 Inch Loaded QuickLIFT will level the front of your vehicle. Some applications will require you to purchase two different part numbers Left and Right.

A: Thanks for the inquiry, the Rancho 2 Inch Loaded QuickLIFT part # RANRS999938 is incorrect you'll need part # RANRS999922, they are ready to install, no lift on the rear is necessary.

A: Yes the rear would be rancho rs9000's

A: Hello F150, The Rancho 2 Inch Loaded QuickLIFT are sold individually.

A: Hello jordaninstock and thank you for the inquiry on the Rancho loaded Quick-lift. I am sorry to say that Rancho does not make this type of part for your vehicle. Sorry, but we do not sell any parts for a 2010 Dodge Caliber.

A: Thanks for the inquiry Jordaninstock, the Rancho 1.1 Inch Loaded QuickLIFT part # ranrs999943 unfortunately we do not offer these for your vehicle.

A: Hello there, the Rancho 2 Inch Loaded QuickLIFT will work with your 2014 GMC Siera SLT Z71. The reason why the computer is telling this is because it should ask you if your truck is w/o Electronic Suspension; w/o 4 Wheel Steering; w/o Z71 Off Road Package. There is a few bugs they still have to work out that a live person should ask you. Please fell free to call me if you would like to place the order. 800 337 9005 ext:5923. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the question BMK Rancho 2 Inch Loaded QuickLIFT RANRS999935 Sorry, but the ones from your 2007 F150 will not work on the 2014 F150. Thank you Answer box sales

A: Thanks for the inquiry Fuzzy, the Rancho 2 Inch Loaded QuickLIFT part # RANRS999901 is correct and the matching rear is part # RANRS999198, these struts will level your truck.

A: Hello The QuikLift shocks are sold each at the 210.99 This is the Rancho 9000 series shock plus the coil added to make up the strut.