A: No

A: Yes they will fit.

A: The Rancho RS981 is for the S3 stem end type. Rancho does not have a replacement bushing for the LS50 end type.

A: Yes it will

A: 5/8-in. Straight wall bushing | Mounting Code: L1 (Steering Stabilizer) | The XJ Rear Upper Mounting Code uses: XP6 | 0" lift height Rear: RS999129 | Front: RS999128

A: Please measure yours before ordering | 3/4-in. Hour glass bushing | Mounting Code: L3

A: Thank you for the question. We need to know the specific Rancho shock absorber number. The RS984 is for the L3 mount code. Hour glass design with a .75 inch center hole. Includes metal sleeves if needed for a .500 inch bolt.

A: Thank you for the question. In general, when shocks come with the bushing and sleeve pressed in from the factory such as this, the bushings are not field serviceable. The only serviceable loop style bushings are the ones that do not have a sleeve pressed in from the factory.

A: Thank you for the question. The bushing inside diameter is .420 and the nut thread pitch is 3/8-24.

A: Rancho TECHLINE: 1.800.325.8886 need a little more information.

A: It depends on the shocks you have. The inside diameter of these bushings are 0.375 in.

A: We do not have the dimensions. You would need to contact Rancho.

A: Bushings for those come from Rough Country part number 81019.

A: Has to be an “L1” mount 5/8”. Shock mounting codes are found on the Rancho site when you key in the shock part number.

A: These fit mounting code L1 which is the upper mount for a shock that fits a 99 F-350

A: We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821

A: Hello Sonny45, It's hard to say exactly what will fit your aftermarket stabilizer. There are these and we also have RS981. RS981 would be a safer bet. These are the dimensions: RS981 has a 3/8" bushing inside diameter and 3/8" x 24 thread size. Thanks for checking us out, we appreciate your business.

A: The Rancho Polyurethane Shock Bushing Kit - RS981 has a 3/8" bushing ID and 3/8" x 24 thread size.

A: Hi Shon, It is hard to tell 100%. Rancho nor Bilstein publish the sizes of either the bushings or the stem of the shock. Rancho offers two part numbers of universal shock stem bushings. The RS979 and RS981. The 979 says Ford on the package and the 981 just says stem. I would try the RS981 set

A: Hawg- Thank you for your question. The Rancho Polyurethane Shock Bushing Kit ID is .688 the OD is 1.562 inches. They are replacement bushings for Rancho shocks with Eyelets.