Rancho Lift Kits

A: Thank you for the question. Yes, the rear shocks (RS999316) in the suspension kit RS66507R9 can be used without installing the rear blocks. They will fit and function with the factory ride height on this application.

A: Yes they will. It is the same thing I did on my truck. 

A: On my 2019 the fx4 came with factory blocks.    These just replace the factory ones.   

A: Thank you for the question. Sorry, the Rancho RS66507R9 is not cataloged for this vehicle. Currently Rancho does not catalog a lift or coil springs for this application.

A: Please call our sales team for more information Toll Free: 1-877-474-4821

A: The Rancho RS66507R9 raises the front 3 inches and the rear 1.5 inches.

A: You would truly get a 3in lift from this kit, Thanks!

A: Only the Rancho Quick-Lift loaded assemblies are pre-assembled with coil spring and upper mount. Thank you

A: Yes, the front strut assembly comes fully assembled with the coil spring and upper mounting plate.

A: Diameter and width of that tire should not be a problem. I will be installing the same overall tire size on my truck.

A: Spring Rate. Use the Rancho Part # RS66118BR5 Suspension Lift Kit for the 2-Door JK

A: No. You have to reuse your old spring, and strut mount. I bought both new from ford and assembled them prior to doing the lift to save on down time for my 2014 F-150. I would also recommend spc heavy duty cam bolt kit. A little extra work but worth your alighnment not moving. 

A: Not seeing your specific FX4 5.0 listed : TECHLINE: 1.800.325.8886

A: Thank you for the question. The Rancho RS66119BR9 will raise the stock vehicle 2 inches. Installation of additional accessories may decrease the amount of raise.

A: NON-STANDARD QUALIFIER: Black; Includes Progressive Rate Coil Springs; Requires Exhaust Cross-Over Pipe RS720003 for (2018-12); The following front shock absorber(s) are compatible with this suspension system: RS999331, RS77331, RS55331; The following rear shock absorber(s) are compatible with this suspension system: RS999332, RS77330, RS55332; Short Arm Suspension System

A: Thank you for the question. Differential spacers are not included nor required with this kit.

A: Thank you for the question. It is best to check with your local 4WD centers as installation cost can vary greatly in different regions.

A: Thank you for the question. The Rancho RS66507R9 does not change the vehicles towing and payload capacity from factory specifications.

A: Hello and thank you for the question. Yes, many of the bushings are available separately. The part numbers can be found on the installation instructions for the kit.

A: Thank you for the question. This suspension system was developed using LT285/60R20 tires on a 5.75”backspacing wheel. Before installing tires and wheels, consult your local tire and wheel specialist.

A: This kit is intended to lift and level vehicles, however this is hard to say without knowing the specifics of your vehicle. If you need further help feel free to call our Sales & Support - 855-554-2400

A: The Rancho 3 Inch Lift Suspension System with Upper Control Arms - RS66507R9 would complete the install on the 2015 Ford F-150 Lariat. Check it out: https://www.4wheelparts.com/sku/Rancho/standard/RS66507R9.pdf for more information please call 4WP toll free: 800-421-1050

A: You will need to call that store to get a quote on installations: https://www.4wheelparts.com/stores/california

A: Per Rancho, this is for 2-door JL only: https://www.gorancho.com/products/suspension-systems/jeep-suspension-systems/2020-2018-jeep-wrangler-jl-3-in-suspension-system-rs66121br5.html

A: RS66504R9 Fits up to 34X12.50 on 9” wide 5.5” backspacing wheel with trimming. Fits up to 33X12.5 on OE wheel. May require trimming for proper clearance.

A: It includes rear blocks to raise the rear an additional 1.5-in to level out the entire truck.

A: Kit comes with 3” front / 1.5” rear blocks to level the truck.

A: Most lifts are going to be a little stiff than stock and they will for sure be better for off road use.

A: Per Rancho: We do not catalog it for the 2021 yet, but I don’t know of anything that would keep it from working. I don’t know of any strut change from 2019

A: It doesn't fit LJ models, they are longer. Only fits the 97-06 TJs.

A: No there is not.

A: Yes, this will fit your vehicle.

A: We do not sell it without the shocks, the kit comes already boxed from Rancho. You could call our sales team and order the components individually if you would want to do that.

A: What year? If you look at the fitment on this part, it does say it first the Trail Boss but I'm not sure what year you have. Feel free to call to verify Toll Free: 1-877-474-4821

A: 1.5" block

A: It is discontinued so I am assuming Rancho is no longer making this. You might want to call them to see if they have an alternative part available for this.

A: This kit is intended to lift and level vehicles, however this is hard to say without knowing the specifics of your vehicle. If you need further help feel free to call our customer service line at 1-877-474-4821.

A: Requires Strut Tower Spacer RS886520 when re-using the O.E. Strut. That should be all you need. This is a complete lift kit.

A: Typically it is plastic inner fender liners where tires rub.

A: Yes, this lift kit will provide the same 2" lift height to run 35" tires, but you may need to do some minor trimming.

A: Upper control arms will. Struts will not.

A: Please contact our sales team toll free at 1-877-474-4821 for shipping and installation details.

A: On a 4" lift you can fit a 35" tire with some trimming and the correct wheel backspace and expect some rubbing. I would recommend a 33" tire If you would like to run a 35" tire I would recommend a 6" lift.

A: Hello Donnie, Yes, the RS9000XL shocks that come with this kit are adjustable. Thank you for the question.

A: Thanks for the inquiry Ecarranza, the Rancho 2.5 Inch Primary Lift Kit with RS9000XL Shocks part # RANRS66901R9 you will have to buy a 6 inch lift to achieve that height, yes you can clear a 33 inch tire with a leveling kit.

A: Hello David The 5 inch back space will contact the control on turns and on full droop. You could use the 5 inch with a 1 inch spacer and have plenty of clearance that way. Thanks

A: Thanks for the inquiry Alex, the Rancho 4 Inch Lift Kit part # RANRS6583B this lift will make the vehicle level.

A: Hello CBoston, After installation of this kit, longer shocks will be required. We highly recommend the part number S/DShockingRS9000XL. That package will get you two front and two rear shocks that will fit this kit and your vehicle application. Thank you for the question.

A: Hello GSHOCK, Yes, this will fit your vehicle application. Thank you for the question.

A: Hello Dave, The rear lift lock is 1" tall. Thank you for the question.

A: Hello Big, The Rancho 4 Inch Primary Lift Kit RANRS66551B will level your vehicle. Thank you for the question.

A: Hello Biscuit, Yes, the Rancho 2 Inch Sport Lift Kit with RS9000XL Shocks RANRS66109BR9 will fit your vehicle application. Thank you.

A: Hello Benzzy, According to Rancho you can fit a 32x10.50 tire. Thnak you.

A: Thanks for the inquiry Tyler, the Rancho 4 Inch Lift Kit part # RANRS6569B will fit you'll just need shocks.

A: Hello Honey, This part number will not fit your vehicle application. You will need part number RANRS6548B. This kit will allow you to run a 35x.12.50 tire. Thank you.

A: Hello TuckeredOut, According to Rancho this kit requires an 8" to 9.5" wide wheel with a 4.5" backspace. I would say your current tires will fit but the wheels will not. Thank you.

A: Hello neal, You may have a drive line vibration on the highway. At minimum we suggest a Rubicon Express Transfer Case Lowering Kit 1.0" YJ/TJ/LJ R/ERE2100

A: Thanks for the inquiry TB, the Rancho 3 Inch Trail Lift Kit part # RANRS66107 will require an exhaust spacer use part # RANRS720003.

A: Hello aaronlf23, No additional hardware is required to install the Rancho 2.5 Inch Sport Lift Kit RANRS6503 on your vehicle application. Thank you.

A: Hello Andre, No shocks are included with the Rancho 6 Inch Suspension Lift With Aluminum Steering Knuckle RANRS66302B. Thank you.

A: Hello Shannon, Yes, the Rancho 4.5 Inch Radius Arm Lift Kit will fit your vehicle application. No, you will not need to index the transfer case. The 4.5-in. Rancho Suspension Competition Radius Arm Kit for the Ram 2500 features front coil springs, competition style radius arms, trackbar bracket, sway bar relocation brackets, brake line brackets, bump stops and a forged pitman arm. In the rear it features progressive rate coil springs, sway bar drop brackets, rear trackbar bracket, bump stops and rear brake line brackets. The competition style radius arms are longer in length and have adjustment tabs to allow the re-use of factory cam bolts to meet caster specifications. This kit is precision engineered to be 100-percent compatible with the Ram factory electronic stability system, and has been FMVSS126 certified. The kit was designed with 37-in. tires and 20-in. wheels with 5.5-in. of backspacing. Thank you.

A: Hello JJ, According to Rancho Suspension, the Rancho 4 Inch Lift Kit RANRS6582B will fit the 20" OE wheels with a 275/65R20 tire. Thank you.

A: Hello Jay, The Rancho 4 Inch Sport Lift Kit RANRS66102B will require CV style driveshafts. If you would like to keep the factory driveshafts look for a suspension life kit that is 2.5" to 3" of lift. Thank you.

A: Hello Jacob, We recommend the 4 Rancho RS9000XL Shocks with 4 Red Shock Boots Part Number: S/DShockingRS9000XL. No carrie bearing drop is required for this kit. Thank you

A: Thanks for the inquiry Russ, the Rancho 4 Inch Lift Kit part # RANRS6579B is not complete, please call our call center for help. Thx Carl.

A: Hello black, We suggest the Rancho RS9000XL Series Shock Absorber Part Number: RANRS999289 (Front) and Part Number: RANRS999297 (Rear) for a quality ride on and off-road. Thank you.

A: Hello Tim, We suggest pairing this with a set of Rancho RS9000XL Series Shock Absorber Part Number: RANRS999786 (Front) and Part Number: RANRS999274 (Rear) for a very nice ride on and off-road. You would need to call your local 4 Wheel Parts store for installation cost quotes. Thank you for the question.

A: Hello Blue, Pleaser contact Ranco Suspension for more technical details.

A: Thanks for the inquiry jace09, the Rancho 2.5 Inch Primary Lift Kit with RS9000XL Shocks part # RANRS66901R9 for the most part we recommend a 17" wheel with a 285/70/17.

A: Mike, yes you can run a 5" back space with that kit. Hope that helps and thank you for your question.

A: Mike, as long as the 17x8 wheel is an after market wheel. If its your stock 17" wheel it wont fit, not enough back space. thanks for your question.

A: Yes with the Rancho 6 Inch Suspension Lift With Aluminum Steering Knuckle and 20x9 wheels you should be able to clear 35" tall tires fine. Hope this helps!

A: Hello Josh, Rancho does not offer an add-a-leaf for the 2005 to 2013 models.

A: Thanks for the inquiry Jay, the Rancho 4 Inch Lift Kit part # RANRS6548B this will help with the ride assuming the larger tires, there is not a lot you can do with softening up a suspension that has a torsion bar front end.

A: Thanks for the inquiry AJ, the Rancho 4 Inch Lift Kit part # RANRS6594B we don't know if it will fit you can contact the manufacturer at 734-384-7804 for any tech questions.

A: Hello Mike, The Rancho 4 Inch Lift Kit can be financed and installed at your local retail store.

A: 8-10 hours for installation. You would need a full tool set, air compressor and a lift to do this kit.

A: Thanks for the inquiry DevilDog, the Rancho 4 Inch Lift Kit part # RANRS6587B will fit your 2009 Ram 1500 4x4 the only options from Rancho is part # RANRS5810 front and part # RANRS5369 rear.

A: Hello Sorry for the slow response your question seems to have been stuck in the queue and we just got it. This kit is not really hard to install but is very time consuming to install. There is some minor grinding and cutting in the differential area. It would be recommended to have a buddy there to help with the install. Thanks

A: Thanks for the inquiry Matt, the Rancho 4 Inch Lift Kit part # RANRS6569B you can call our national call center to order individual components or call rancho to get the part #'s 734-384-7804.

A: Hello Rob, Thank you for asking. The Rancho 2.5 Inch Lift Kit with RS9000XL Shocks will allow you to clear 33x12.50" tires.

A: Hello Lynn, The Rancho 4 Inch Lift Kit can be installed at anyone of our retail stores. Please contact your nearest store to schedule an appointment.

A: Yes the Rancho 4 Inch Lift Kit will work on you 1500HD. Hope this helps!

A: Hello Collin and thank you for your question! Rancho 4 Inch Lift Kit would go by the year, make and model of your truck.

A: Hello El Diablo, Thank you for asking. We are currently waiting on an answer from Rancho to see if it will work on a 2015 Tacoma. On other brand lift kits 2015 are the same kits as the 2013 models but the gentleman at Rancho was not sure if their kit would. He said he was going to get back to us with an answer. As soon as we get an answer we will let you know.

A: Thanks for the question David, You can use the Quik Lifts with the lift kit but you will have to set them at stock ride height.

A: Hello Anthony, The Rancho 4 Inch Lift Kit with RS5000 Shocks does not include the steering arm. Part # GM400

A: Hello Joey, Rancho 4 Inch Lift Kit includes rear blocks to raise the back & shocks are sold separately.

A: Hello Shawn, Thank you for asking. The Rancho 2 Inch Sport Lift Kit with RS9000XL Shocks will allow you to run 35" tall tires with an aftermarket wheel or wheel spacers on your current wheels. This kit is more of a entry level off road kit and will rub if you try to do some articulating. If you are looking for a more serious kit to rock climb, you should be looking at short or long arm kits.

A: Hello Cam, The Rancho 4 Inch Lift Kit does not include front coils.

A: No the Rancho 4 Inch Lift Kit does require a aftermarket wheel with less than 5" of back spacing. Hope this helps!

A: Thanks for the question. Rancho 3 Inch Trail Lift Kit ranrs66107 Rancho offers three different options for this lift kit. you can either go with the RS5000. RS9000XL or the RS 7000 series shocks. Thank you.

A: Thanks for the inquiry Basscat1998, the Rancho 3 Inch Trail Lift Kit part # RANRS66107 to use this product you'll need wheel spacers part # G/293-73-150 or use a wheel with a negative offset.

A: Hello Phillip, The Rancho 4 Inch Lift Kit will accept a 18"wheel with 4.5-5"backspacing.

A: yes this tire and wheel package will fit this 4" lift kit. Thanks

A: Hello Ron, a 4.56 Ratio would be recommended on your truck if you went up to a 35" tall tire. Thank you for your question.

A: The kit is complete besides the shocks nothing else will be needed. thanks

A: Thanks for the question txss, as long as your Tahoe doesn't have the rear ride control this kit comes with replacement rear coil springs.

A: Andy,Thanks for the question.Part # RANRS66302B Rancho 6 Inch Suspension Lift With Aluminum Steering Knuckle is not compatible with Rancho quicklift level kit.

A: Thanks for the inquiry Steve, the Rancho 4 Inch Lift Kit part # RANRS6548B requires no more than a 4.5 inch backspacing.

A: Hello They are designed to be used with the 4 inch kits. They will work with taller coils depending on which kit you have.

A: Hello Joe, http://www.gorancho.com/assets/instruction_pdf/Rancho_Installation_Instructions_For_RS6594B_Revision_F.pdf I hope this helps you.

A: Hello there, This suspension system was developed using the following tire & wheel combination BFG All Terrain 315/70R17 tire, 17x8 wheel with 5.5"inches of wheel back spacing. Total back spacing is 6.5inches. Trimming the bottom corners of the front bumper is required. 20” OE wheels with 275/65R20 tires will fit this system. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Jgon44, Thank you for asking. The Rancho 3.5 Inch Short Arm Lift Kit is a really good quality lift. Rancho is one of the top brands out there when it comes to lift kits. This kit is only the lift with no shocks, you will have to order http://jo.my/1ljimp to complete a full lift kit.