I selected this kit because I had raised my 93 YJ with a Trailmaster lift kit. This tossed the drive line out of wack and thus I used this along with 4degree shims to the the angle back in line. The parts are of good quality and fit really snugly with my skid plate. I was able to install mostly solo with a little help from y 14yr old son. Those wondering 55 foot pounds for the bolts.
after I install the transfer case drop down kit, do I need to do anything with the stick shift and the 4wd shifter, also what about the exhaust mounted to the cross member?
chris from beaumont,ca on
Hello Chris, After you finish installing the Pro Comp Suspension Transfer Case Lowering Kit you should be finished with that project.
Dave from beaumont,ca on
I have a 2000 Jeep Wrangler Sport, 4.0 with a 2" lift, that had 1 1/2" rectangle tube lowering spacer that has rusted out and needs replaced. Are these spacers the same height?
I'd rather install this lowering kit than install another rectangle tube if they are the same height.
David Sr from 29 Palms, Ca on
Thank you for your question. The Pro Comp Suspension Transfer Case Lowering Kit will drop you t case 1 inch. You should be able to replace the tube with these spacers.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now