Does what it is supposed to do. I’m using to protect my air ride bags when lifted for oil changes or tire rotations.
By Dan S
4.0just what we needed
We are a small one off restoration/custom shop. These straps finished a custom rear suspension on a retro rod build. They looked good and fit as they should. the only thing they could add is spacers to set they away from the mount points so they don't rub. great shipping and good product
By ken's kustoms
from western Colorado
1.0stretchy limit straps
i installed these on a dana 44 rear axle, at full drop the straps stretch way beyond there origanl length. Would alow shock to bottom out. I wont use as limit travel strap. May be useful for other purposes.
from Chino Valley az
5.0This was the perfect product !
I used the product for my rock crawler,it looked and worked great!
Thanks for your question. The Pro Comp Suspension 11 Inch Limit Straps will require some fabrication to install. They are designed for custom applications and you will need to figure out how it is best to install on your Titan. Remember to have the limit strap bottom out before your shocks do.
11 inch from center off mounting hole to center of mounting hole? or strap length? I'm looking for 12 inches from mounting hole to mounting hole...please advise. thank you
Answer this question
Thank you for your question. These limit straps, Pro Comp Suspension 11 Inch Limit Straps are measured eye to eye. We do have the Gen right limit straps that are 12 inch. They can be found here http://jo.my/7su3h1
How much weight will these straps handle and what size is the mounting hole?
Answer this question
The ProComp Suspension Limit Straps by Pro Comp EXP5213 can handle 5000lbs and have a 1/2" mounting hole ID.
We appreciate the email. Thank you.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now