So to kick it off, my kit was missing the 4 bolts to fasten the main bracket and sway bar brackets to the frame, luckily the factory ones worked so not a huge deal. Next I had to notch out the slots in the bracket about 1/2" to center it properly. When installing the bearing piece, one of the two supplied bolts and nuts stripped out when I was torquing it, long before it reached the proper torque. I had to cut it off with a grinder and replace it with a grade 8 bolt from a local hardware store. I definitely notice a difference now that it is installed, and for sure tightens the steering up, but for the hassle I went through installing it, I'd say go with a different brand.
By Brad from Alberta, Canada
Didn't Fit !
The bearing and sector shaft were way out of center. I returned it for a full refund.
By Jaredwe from DFW, TX
easy to install with a little modificati
only beef is the frame holes didn't line up had to drillthem out
By Wild Bill from Ramah CO
A steering box brace is a must have if you are running big tires and wheels.When installing a brace you dont want alot of slop that can loosen up and take away the benefits of the brace.This product had excellent fitment. Pro Comp also supplied simple installation instructions.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now