Pro Comp Stage II Lift Kits

A: Hey Tommy, Apologies bud but this is only for 4WD Diesel models. Please feel free to swing by one of our stores: https://www.4wheelparts.com/stores/find-a-store Or reach out to one of our vehicle experts at Toll Free: 1-877-474-4821 Thanks for reaching out!

A: Give us a call: 800-421-1050 (Year of Tundra)

A: The Pro Comp 6" Stage II Lift Kit with PRO-X Shocks - PN: EXPK4062T comes with (2) Front and (2) Rear shocks.

A: Yes it will, Dually will need different rear U-bolts. Please call us Sales & Support - 877-474-4821 so we can add the correct U-bolts to the order.

A: This kit will allow 33"X12.50"

A: No extension required.

A: Front will. Rear will need different u-bolts.

A: The pair of knuckles: EXP59001B-2 out of the Pro Comp 6 Inch Stage II Suspension Lift Kit with Coil-Over and Pro Runner Rear Shocks - K6006BPX. Give us a call the knuckles are not sold online. Sales & Support 877-474-4821

A: 4"

A: Hello, Yes, modification is required. Here is a link to the instructions https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/K4054B.pdf . Thanks for checking us out.

A: This kit would not work with you 200 F250, Feel free to call into the sales line to talk options and place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: This is not the kit for you. You would need: K4189 is 6” kit for Ford F150. K4189 kit comes with 4” rear block and u-bolts. 4” Block: EXP95-405F (2 required) U-bolt: EXP13-90390 (4 required) U-bolt hardware: EXP20-65302 (1 required)

A: Pro Comp makes 5.5” block for the F150. Part number is 95-555FB.

A: A couple things here: Is it the correct part number? Is the axle centered under the vehicle? If the axle is shifted to driver side due to incorrect track bar length or lack of track bar correction bracket the drag link would be too long as you are experiencing. Please call our service dept. so we can assist you further. Toll Free: 1-877-474-4821

A: This would clear 35” easily, 37” with trimming.

A: No it does not.

A: K4066B kit is designed for a vehicle with factory 2” rake from front to rear. The kit will come with 3.5” tall rear blocks to level the rear to match the lift height from the addition of the 6” front coils.

A: Yes this will fit your 92 F150, Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up or install. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: The K4041 kit will fit the front of the F250/F350 dually, but the rear U-bolts that come in kit are not for fitment of the dually rear axle. You will need to measure rear U-bolt length and width and order set accordingly.

A: We have not tested our kits when “stacked” with another suspension lift part or kit, so we do not recommend “stacking”. Additionally, we do not warranty our kits if they are “stacked” with another suspension lift part or kit.

A: No it will not.

A: Hello Kevin, He highly recommend the Pro Comp Pro Runner Dual Steering Stabilizer Kit Part Number: EXP222582Z for your vehicle application. Thank you for the question.

A: Hello tecramerj, EXPK4105B fits 1990 to 1996 FORD F150 2WD Standard Cab and EXPK4107B fits 1990 to 1996 FORD F150 2WD Extra Cab. Thank you for the question.

A: Thanks for the inquiry Snejl, the Pro Comp Suspension 6 Inch Stage II Lift Kit with Pro Runner Shocks part # expk2066bp this will fit but you'll need to have rear U bolts made for your axle. You can run 35 inch tires which will require wheel spacers in the rear.

A: Hello Arvill, Here are the recommended wheel and tire sizes provided by Pro Comp Suspension: Max Tire Size: 37X13.50, Wheel Size Range (Inch):17-20, Wheel Width Range (Inch):8-10, Min-Max Backspace (Inch)4.0-5.75

A: Hello Gibby, The Lift Shield is free with purchase of this kit for the next 4 days. This kit is perfect for the person that drives his vehicle daily (75% on-road and 25% off-road). With ANY lift kit that you install, the vehicle will ride a bit stiffer than the factory ride quality. The only suggestion I would make is adding a front and rear set of stainless steel brake lines. Please note: all 2012 and newer Jeep Wranglers will require upgrading the drive shafts.. I hope this helps. Thank you.

A: Thanks for the inquiry B, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part # EXPK4064B this does come with radius arm bushings.

A: Hello mark, Yes, the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks can be upgraded to a long arm at a later date. Thank you.

A: Jerry, Here is the part# to a dual steering stabilizer kit EXP222581Z this is the cure to the dreaded death wobble. Good in stock and ready to ship. Thanks for the question.

A: Hello DW, The radius arms are straight. If you are having rubbing issues I suggest upgrading the correct wheel backspacing.

A: Hello Jesse, Yes, but you will need to trim a bit of the front bumper for turning clearance. Thank you

A: Hello On some Jeeps we do get a little vibrations but very rarely. There is a cam kit for the rear axle that will align the rear drive shaft angle. It is part number EXP 20-65225 Thanks

A: Hello Jay, The Pro Comp Suspension 6 Inch Stage II Lift Kit with ES9000 Shocks include shock relocation brackets.

A: Hello Upnorth, Thank you for asking. Unfortunately there is no specific lift for a dually that we can offer. The Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks can work for your truck but you would have to have a company make you larger u-bolts for the rear blocks. The front components will work, but the rear is what causes an issue.

A: Hello Tim, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part# EXPK4066B does not come with the boots. Boots are not included with any of the Pro comp Es shocks. We can get you boots in any color you'd like for 6.99$ a pair. Thank you for your question.

A: Hello Tim, Boots aren't included in either kit. We do sell Boots for 6.99$ per pair in any color you'd like. Thank you for your question.

A: Hello Justin, the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks part# EXPK4186BMXR does not require new driveshafts. Thank you for your inquiry.

A: Hello kodey and thank you for your question! Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks will work for your standard cab F-150, part number EXP4105B.

A: Thanks for the inquiry maverick, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part # EXPK4066B is nopt a difficult install with all the right tools, install time is about 8 hours, the is no body lift associated with this lift.

A: Hello Tim, The Pro Comp Suspension 8 Inch Stage II Lift Kit with ES9000 Shocks will allow you to run a 17"wheel or larger.

A: Hello Josh, the Pro Comp Suspension 8 Inch Stage II Lift Kit with ES9000 Shocks part# EXPK4186B will work with your factory wheels however if you run larger tires they will probably rub when turning due to the factory wheels offset. Thank you for your inquiry.

A: Hello Brian, the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks part# EXPK4056B does come with a longer radius arm which eliminates the need for the huge drop brackets for the stock arms. Thank you for your question.

A: Hello Jay, Thank you for asking. The Pro Comp Suspension 6 Inch Stage II Lift Kit with Pro Runner Shocks will allow you to clear 37x12.50" tires.

A: Thanks for the inquiry Stan, the part # expk3090b will come complete and will not require any other components.

A: The maximum tire size recommended by Procomp on the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6 Reservoir Shocks is 37X13.50. You can run any wheel as long as it has less than 5" of back spacing. Hope this helps!

A: Hello Shane, Thank you for asking. The Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks will not fit your Ford Explorer.

A: Hello Griff, the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks has the same radius arms as the 6" lift. Thank you for your question.

A: Hello Lil, The Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks towing capacity will remain the same.

A: Hello Phil and thank you for the inquiry on the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks. With this lift kit installed the Max Tire Size (Inch): 38.5 X 14.50;Wheel Size Range (Inch): 16 +;Wheel Width Range (Inch) :8 to 10;Min-Max Backspace (Inch): 4 to 5.75 Here is the link to get you back to the ordering page: http://jo.my/9bqt21.qrcode

A: You can drive to any 4 wheel parts store or call pro comp direct 800-776-0767

A: Hello Gary, Please contact Pro Comp at 800-776-0767, they should be able to provide you a part number.

A: Hello Nate, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part#EXPK4041B will clear up to a 37" tire. Thank you for your question.

A: Hello there, the Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks will allow a Max of 35x12.50 and Wheel size range: 15-20"; Wheel width range: 8-14" with a Min-Max backspace: 3.25-4.75". 37" inch tires is at your discretion. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello there, the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks will work with a Dually. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Joey, the Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks part# EXPK3083BMX comes with upper and lower control arms and also an adjustable track bar. Thank you for your inquiry.

A: Hello Phil, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part# EXPK4066B will clear a 35" tire no problem. Thank you for your inquiry.

A: Hello Donnie, Thank you for asking. The Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks come as boxed components and we will not be able to take out the sway bar end links from the kit.

A: Thanks for the inquiry Kris, the Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks part # EXPK3090BMX all you really need is an exhaust spacer for the front if it is a 2012 or newer, you can use PART # R/ERE4532.

A: Hello Paul, the Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks part# EXPK4105B will allow you to fit a 35" tire. Thank you for your inquiry.

A: Thanks for the inquiry zack, the Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks part # EXPK4186BMXR does not come with brake lines they are not needed, they use relocation brackets.

A: Hi Chris Pro Comp Suspension 6 Inch Stage II Lift Kit with Pro Runner Shocks, EXPK4182BP The ES 9000 is a good entry level, twin chambered shock,. The Prorunner model is a monotube shock with little better handling . The MX6 is a monotube shocks that you can adjust the damping of the shock from softer to firmer. Thanks for the question

A: Yes, replacement parts are available for the Pro Comp 6 Inch Stage II Lift Kit with ES9000 Shocks. The manufacturer can be contacted for technical help with the components at 800-776-0767. Thank you

A: Stumpy- Thanks for the question. The Pro Comp Suspension 4 Inch Stage II Lift Kit with ES9000 Shocks will require you to replace your drive shafts.

A: Kris, Thank you for your question. On the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks part #EXPK3083B comes with a front track bar and brake extension brackets.

A: Grizzley- Thanks for your question. The Pitman arm in the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks should work for either right hand or left hand drive.

A: Knuck- Thank you for your question. The Pro Comp Suspension 8 Inch Stage II Lift Kit with MX-6R Adjustable Reservoir Shocks is an 8 inch kit to allow for 38.5 inch tires. The Pro comp stage II is only a 6" to allow for 35" tires.

A: Priuseater- Thank you for your question. The Pro Comp Suspension 7 Inch Stage II Lift Kit with MX-6 Reservoir Shocks Comes with rear springs.

A: Frank- Thank you for your question. Please contact your local store found here http://jo.my/obhjgd they can quote time, schedule and cost.

A: Hello Bob, Thank you for the question. Yes, the factory drive shaft will work with this suspension lift kit.

A: Therob- Thank you for your question. The Pro Comp Suspension 6 Inch Stage II Lift Kit with ES3000 Shocks includes 4 shocks, 2 front and 2 rear.

A: Hello Phil, Thank you for the question. Yes, the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks EXPK3083B comes with front sway bar disconnects.

A: Dirt- Thank you for your question. The Pro Comp Suspension 8 Inch Stage II Lift Kit with ES9000 Shocks comes with everything you need to install. The drive shaft issues are handled with a drop carrier bracket.

A: Hello Gene, The Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks EXPK3090BMX comes with an adjustable front track bar and a rear track bar relocation bracket. If your vehicle is a 2012 or newer you will need to install an aftermarket front driveshaft or install the Rubicon Express Exhaust Spacer Kit R/ERE4532. Thank you for the email, we appreciate your business.

A: Hello tom, Yes, after installation of the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES9000 Shocks EXPK3090B will require alignment. Thank you for the email.

A: Bud- Thanks for asking. Pro Comp does not offer the same "boxed" style upper control arms for your Jeep Wrangler TJ but they do offer an adjustable arm that is similar here http://jo.my/y1ddr3

A: Hello Eddie, Yes, the Pro Comp Suspension 6 Inch Stage II Lift Kit with Pro Runner Shocks EXPK2065BP dones come with new lift coil springs. We do not offer a rear leaf spring for your vehicle application at this time. Thank you for the email.

A: Hello Moody, Yes, the Pro Comp Suspension 6 Inch Stage II Lift Kit with MX-6 Reservoir Shocks EXPK4152BMXR will level the vehicles static ride height. the kit includes a 6" front coil spring, rear add-a-leaf, 1.5" rear lift block, u-bolts and hardware. Thank you for the email.

A: Hello Gixxerbrad, The Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks EXPK3090BMX comes with everything you will need to fully install. You will need new front and rear CV drive shafts with this kit. Thank you for the email

A: Hello Lee, Installation time of the Pro Comp Suspension 4 Inch Stage II Lift Kit with MX-6 Shocks EXPK3090BMX is 7 - 8 hours. Please note any local 4 Wheel Parts store can do this installation for you. Thank you for the email.

A: Hello Big Country, Yes, the Pro Comp Suspension 6 inch Stage II Lift Kit with ES3000 Shocks EXPK4066B is a direct bolt on installation. Everything needed to lift your vehicle 6 inches if provided. Thank you for the email.

A: nolan, Yes, the ProComp Suspension 4 inch Stage II Lift Kit with ES3000 Shocks EXPK3083B is engineered with proper geometry. You will need to align your Jeep after installation.