Pro Comp is driven by genuine off road enthusiasts. Pro Comp Suspension Products reflect customer-driven, racing influenced technology and engineering with a focus on world-class manufacturing processes and techniques. When it comes to your vehicle's handling, look and performance, we know you don't make compromises and either do we. From the middle of downtown to the middle of nowhere Pro Comp will get you there and back.
Make your Tundra look mean! Far exceeded my expectations. Very very Clean looking lift
By BLWilleford from Omaha,Ne
great value kit
i like this kit it’s pretty good. came with Hyd shocks, extended stainless brake lines, adjustable drop stee drag link, and extended sway bar links. the speings fit nicely and came with poly bushings. the rear shock bushings were a little too small to fit over the bolt shanks so i drilled them out slightly and they went on. it lifted my truck 4” in front and 4.5” in rear. it sits nice and level and flexes decent. its a lil stiff but im sure will get softer over time. i also added a Highjacker drop torque arm bracket and steering stabilizer. also Trail Gear 1.5” deiveshaft spacer for the front. the front u-bolts it comes with are not needed and should come with rear instead. i was able to use one stock one on the rear on each side and one short new front one on each side.
By Jr84pickup from NM
Great Lift kit
Great kit. Wish the front strut assembly would come pre-assembled with new strut mounts to make the job easier. That's the only negative feedback I have for it.
By Manuel from null
Easy to install did it all in one day on the floor with jacks by myself. But the pro comp shocks that c as me eith the lift suck. Now i will spend the extra cash to get some Fox dhocks for a better ride.
Will the stock 20 inch F150 wheels from a platinum or fx4 work with this kit?
Rob from TX on
Wheel/tire size for Pro Comp Stage I 4 Inch Lift Kit is described in the instructions as follows:
For this application, a 18” and larger wheel not to exceed 9” in width with a maximum backspacing of 5 1/2” is acceptable. A quality tire of radial design, not exceeding 35” tall X 13.5” wide is recommended. Please note that the use of a 35” X 13.5” tire may require fender modification
With this in mind a 20" wheel should work.
If you have any further questions you can contact our customer service center @ 877-474-4821 and they can help you.
For this Pro Comp 6 Inch Stage I Lift Kit with ES3000 Shocks, the shock lengths are as follows:
Front shocks: Extended Length: 24.84";Collapsed Length: 14.82";Travel Length: 10.02"
Rear shocks: Extended Length (in): 29.830 in. Collapsed Length (in): 17.320 in. Travel Length: 12.51"
Hope this helps
If you have any other questions you can contact our customer service center @ 877-474-4821
what is the installation cost$ part#-K2101B, 2014 dodge ram 1500?
none from Oakley Ca. on
For installation quotes for the Pro Comp 4 Inch Lift Kit with ES9000 Shocks the best thing to do would be to contact our customer service center @ 877-474-4821. They can even set up an appointment for you at your local 4WP store.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now