Pro Comps Add-a-Leaf kits are the perfect solution when 1.5in. to 2.5in. Of raised height is required. Pro Comps Rear Add-a-Leafs can be used in conjunction with lift blocks in order to strengthen the integrity of an existing leaf pack.
Spring were too long to fit in with the stock springs.
By KDynge from Visalia, CA
DOES NOT FIT RAPTOR
You must cut almost 2" off of the spring to enable fitment on the Raptor. Although they show it fitting, it does not & should not be installed unless you are willing to make these modifications
By KDynge from Visalia, CA
I have an 09 Ford f150 and as many of you know it looks like they lowered them from the previous year, probably an attempt to cut wind resistance for better fuel economy.
I put a 2.5 inch lift all the way around and found the lift is fantastic!
The lift actually improved handling and feel. The ride stayed the same and is a nice improvement to the overall look of the truck.
I have a 2011 f150 fx4 with a 6" rough country lift. I am wanting to push it to a 8" lift by using the bilstien 5100 adjustable shocks in the front and these pro comp leaf springs in the back. Would the leaf springs work and raise my truck to 8"?
Ryan from Waco,Texas on
Thanks for your question. The Pro Comp Suspension Rear Add-A-Leaf Kit will work with the factory leaf pack only. If the rough country lift kit you have is lift blocks only, you will gain 1.5 to 2 inches. You will probably have drive line issues at this lift height.
Mike from Waco,Texas on
I'm looking for something to stiffen up the rear since I got my lift. It's got a little bouncy and I was wondering if this would work or fit. I have a 2011 f150 with a 6 inch procomp lift with 35x12.5r18
nate from on
Thank you for your question. The Pro Comp Suspension Rear Add-A-Leaf Kit will make the rear a little stiffer. You might also try the http://jo.my/86b8mx MX-6 reseviour shock. This shock is adjustable, that way you can tune your ride to your taste.
Mike from on
Ask a Question About This Product
Please Review Your Submission
Thank you for submitting your question.
We will process your question within 24 hours.If you need immediate assistance,
please call 855-229-4637.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now