Pro Comp Nitro 3 Inch Leveling Lift Kit - 65205K


  • Pro Comp Suspension | Part Number: EXP65205K
  • Rear Lift Method (Where Applicable):Lift Blocks & U-Bolts
  • Front Lift Method:Strut Spacers
  • Finish Color:Black
  • Position:Front
  • Fitment:Direct Fit
  • Spacer Material:Steel


Pro Comp Nitro Kits are the economical alternative to a complete suspension system. The Nitro Kits utilize coil spring spacers, torsion keys, and strut spacers to achieve front lift. This leaves the factory steering geometry intact, preserving factory ride quality and handling. The rear lift is achieved through coil spring spacers, leaf spring shackles or lift blocks. If you want to add larger aftermarket wheels and tires to your rig without installing a complete suspension lift kit, Pro Comps Nitro Kits were designed with you specifically in mind.


Nice kit!

Simple lift/leveling kit for a near factory ride. Reasonable cost. I purchased for looks only and not for off road use while using my OEM wheels.

from Tennessee |
installed on 2006 Tacoma

After installing front end had a vibration. I replaced one axle and it helped. Going to put some miles on it and see if it goes away. I think maybe this kit needs to come longer axels.

from Bakersfield CA |
easy install

Great, easy to install. Directions very easy to understand and follow. Would not recommend for some one who is not mechanically inclined. Makes truck look great.

from Kerhonkson NY |
Great product, does exactly what it says

Great product, good instructions, easy to install. 285 tires still need minor trimming. Looks awesome. Handles nice on an off road.

from Sahuarita, AZ |
Great Lift Kit

Installed this lift kit on my 2012 Tacoma with no issues. Truck rides well after install and wheel alignment. Had a Revtek lift on my previous 1995 Tacoma and this Pro Comp lift is far superior.

from Streetsboro, Ohio |

Question & Answers

38 Answered questions

Hi, I am interested in purchasing this lift kit and was just wondering how much you guys would charge for installation?

Asked by Erdub54 from San Diego, Ca on

Thanks for the inquiry Erdub54, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP65205K our stores charge $320.00 for installation.

Answered by from San Diego, Ca on

can I use my stock shocks for this kit? or do i need to purchase front and rear shocks? if so what is recommended?

Asked by HAWN from HAWAII on

Hello HAWN and thank you for your question! Pro Comp Suspension Nitro 3 Inch Lift Kit will not need longer shocks. the kit comes with strut spacers for the front and 1" lift blocks for the rear.

Answered by Nick from HAWAII on

I have a 2013 4x4 4 door Tacoma TRD Sport currently with 17 inch TRD Sport stock wheels. After installing the Nitro 3" lift kit will I be able to use 285/70R17 tires without rubbing? I want to keep the same 17" rims. Also would 285/75R17 tires fit or would these be too large? Thank you.

Asked by Willikens from Charlotte, NC on

Hello Willikens, Yes, you can run a 285/70R17 tire. With the factory wheel you may be required to trim some of the inner wheel wells to clear. Pro Comp Suspension recommends an aftermarket wheel with a 4" to 5" backspace. If you do not want to trim you will need to run a 275/70R17 tire size. Thank you for the question.

Answered by from Charlotte, NC on

See all questions & answers


Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now

This Product Fits the Following:

  • 2018 Toyota Tacoma SR  
  • 2018 Toyota Tacoma SR5  
  • 2018 Toyota Tacoma Limited  
  • 2018 Toyota Tacoma TRD Sport  
  • 2018 Toyota Tacoma TRD Pro  
  • 2018 Toyota Tacoma TRD Off-Road  
  • 2015 Toyota Tacoma Base  
  • 2015 Toyota Tacoma Pre Runner  
  • 2014 Toyota Tacoma Base  
  • 2014 Toyota Tacoma Pre Runner  
  • 2013 Toyota Tacoma Base  
  • 2013 Toyota Tacoma Pre Runner  
  • 2012 Toyota Tacoma Base  
  • 2012 Toyota Tacoma Pre Runner  
  • 2011 Toyota Tacoma Base  
  • 2011 Toyota Tacoma Pre Runner  
  • 2010 Toyota Tacoma Base  
  • 2010 Toyota Tacoma Pre Runner  
  • 2009 Toyota Tacoma Pre Runner  
  • 2009 Toyota Tacoma Base  
  • 2008 Toyota Tacoma Pre Runner  
  • 2008 Toyota Tacoma Base  
  • 2007 Toyota Tacoma Base  
  • 2007 Toyota Tacoma Pre Runner  
  • 2006 Toyota Tacoma Base  
  • 2006 Toyota Tacoma Pre Runner  
  • 2005 Toyota Tacoma Base  
  • 2005 Toyota Tacoma Pre Runner  


Save 20% On Select Pro Comp Leveling Kits