Pro Comp Nitro Kits are the economical alternative to a complete suspension system. The Nitro Kits utilize coil spring spacers, torsion keys, and strut spacers to achieve front lift. This leaves the factory steering geometry intact, preserving factory ride quality and handling. The rear lift is achieved through coil spring spacers, leaf spring shackles or lift blocks. If you want to add larger aftermarket wheels and tires to your rig without installing a complete suspension lift kit, Pro Comps Nitro Kits were designed with you specifically in mind.
the installation of this kit was fairly easy outside of replacing lca due to seized cam bolts. the front gave 2.5 inches as stated but the rear barely gave 1" so prevous to lift i had 1 " rake (higher in rear) after lift 1/2" rake (higher in front) I will have to install blocks or aal.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now