Pro Comp Long Arm Lift Kits

A: Hello Randell and thank you for your question! Pro Comp Suspension 4 Inch Long Arm Lift Kit with Pro Runner Shocks will work for a Jeep Wrangler and the Wranlger Rubicon with a Dana 44 rear axle.

A: Thanks for the inquiry rick, the Pro Comp Suspension Performance Mid Travel Kit part # EXP56203K will provide 0-2.5 inches of lift in the front only.

A: Hello Kennedy, The 3" kit will fit the 305/50R20 (32x12.00R20) and this kit will fit a 35 x 12.50 tire. Thank you for the question.

A: Hello Skip, Yes, you can run this long arm suspension with the Dana 44 axle and tube fenders. You will not have any issue. Thank you for the question.

A: Hello Valleyboy, Yes, this kit will fit your vehicle application. You will also need the Pro Comp NP231 Tail Shaft Conversion Kit Part Number: EXP4007 and Pro Comp Jeep TJ Rear CV-Style Drive Shaft Part Number: EXP4042. For all installation quotes , please call your local 4 Wheel Parts store today. Thank you for the question.

A: Hello JakesJeep, If you already have a SYE and CV shaft the EXP4007 is not required. Thank you.

A: Hello Guy, The Pro Comp Suspension 4 Inch Short Arm Lift Kit with ES3000 Shocks will require a slip yoke eliminator/cv driveshaft combo or a transfer case drop kit.

A: Hi Kevin, Here is a link to the installation instructions with full details chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/http://www.4wheelparts.com/aux_incl/pdf.ashx?pdf=55747B_K3098B_INST.pdf&line=EXP

A: Hello Rad, Tire Size: 33x12.50 Wheel size range: 15" or larger Wheel width range: 8-10" Min-Max backspace: 3.25-4.5"

A: Hey Grater, the Pro Comp part number EXP260140 would be correct for you. Thanks for your question.

A: Hello Jammonammon, The Pro Comp Suspension 4 Inch Short Arm Lift Kit with ES3000 Shocks comes with every thing needed to lit your Jeep. We recommend you also purchase tail shaft conversion kit EXP4007.

A: Hello Boris, The Pro Comp Suspension 5.5 Inch Lift Kit with MX-6 Shocks is only made for the Toyota FJ.

A: Thanks for the question. Pro Comp Suspension 5.5 Inch Lift Kit with MX-6 Shocks EXPK5078BMX Standard is going to be 8 hours for install time. It can take longer depending on the vehicle. Thank you

A: Hello Gotstago, the Pro Comp Suspension 4 Inch Short Arm Lift Kit with ES3000 Shocks part# EXPK3076B does not require a pitman arm. Thank you for your question.

A: Hello cody and thank you for your question! Pro Comp Suspension 4 Inch Long Arm Lift Kit with Fox Reservoir Shocks does in fact come with Fox Reservoir shocks. I hope my answer helps 4 Wheel Parts earn your business.

A: Hello Eric, the Pro Comp Suspension 4 Inch Short Arm Lift Kit with ES3000 Shocks part# EXPK3076B will be a great fit for your daughters first vehicle. The options you are looking to add are great and no you will not need any additional parts. Thank you for your inquiry.

A: Thanks for the question Matt Pro Comp Suspension 6 Inch Long Arm Lift Kit with Pro Runner Shocks, EXPK2074BP This kit will not come with brake lines. The lift kit will come with everything you need to lift the vehicle correctly. Thank you BJ Answer Box Sales

A: Hello there, the Pro Comp Suspension 6 Inch Long Arm Lift Kit with Pro Runner Shocks part number EXPK2078BP will clear tires 37x13.50-17" 18" 20" or bigger once installed on your 2011 Ram Cummins 3500 Crew Cab ST.

A: James- Thanks for your question. The Pro Comp Suspension 6 Inch Long Arm Lift Kit with MX-6 Shocks is the tallest lift that pro comp offers for your 05 Dodge 2500. You could use a body lift on top of that to give you a total of 9 inches of lift with out changing your suspension geometry farther. The body lift part number is PER60143

A: kevin- Thanks for the question. The Pro Comp Suspension 6 Inch Long Arm Lift Kit with MX-6 Shocks will work with your Dually.

A: Justin- Thank you for your question. The Pro Comp Suspension 6 Inch Long Arm Lift Kit with Pro Runner Shocks parts cannot be purchased separately, It is sold kit only.

A: Hello Clifford, Yes, some drilling will be required with the Pro Comp Suspension 4 Inch Long Arm Lift Kit with ES9000 Shocks EXPK3091B. Thank you for the email.

A: Installation time will vary depending on the mechanic's ability. Usual install time is about 6-8 hours.

A: Hello! I know it doesn't appear in the photo, but all bushings are included with this lift kit! You won't need to buy any additional bushings when you purchase this kit.

A: Hi Eric! This is a complete lift kit! Nothing else is required to lift your TJ Wrangler safely. the only items I might recommend down the road would be adjustable track bars or quick disconnect sway bar links. Other than those, and they aren't even required, I can't think of anything else. Enjoy the lift!!