Pro Comp Level Lift Torsion Keys

A: Yes it will fit.

A: Feel free to call into the sales line to talk options and place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Thanks for the inquiry Chris, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key part # EXP63161 basically we'll just sell you chocks that are 2 inches longer than stock.

A: Hello Vince The Autoride system has computer controlled shock dampening and rear auto leveling. I do not recommend lifting the Escalade because of the Autoride system and because of the AWD. The Escalades are All Wheel Drive and lifting it will cause driveline and drive axle vibration. Thank You for your question. Jon Snyder 4Wheelparts

A: Helo Idaho Redneck, Yes, this will handle the weight of the Duramax engine. No, this will not effect towing capabilities at all. Ye, you can fit a 285/70r17 tire without rubbing. Thank you for the question.

A: Hello Bryan, Yes, you will need longer shocks and need to have the vehicle aligned. Thank you for the question.

A: Thanks for the inquiry hi, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key part # EXP63150 yes we highly recommend a wheel alignment.

A: Thanks for the inquiry Mike88, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key part # EXP63150 hthis is correct for your vehicle.

A: Hello lowriderguy, The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key is specifically designed with lift. The factory are a weaker designed that does not accommodate for a lift. Thank you for the question.

A: Hello mr.ziffel, Yes, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key EXP62150 will fit and level your vehicles ride height. Thank you.

A: Hello Tman992, Provided your 02 silverado z71 4-wheel drive is a 1500 and stock, this will fit your vehicle. Thank you.

A: Thanks for the inquiry Byron, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key part # EXP63161 you can install a 35 but they'll rub all the time, max recommended tire is a 33.

A: Hello Kevin, Yes, this kit will fit your vehicle application. That is also the correct shock part number for your vehicle. Thank you.

A: Hello mac, Yes, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K will fit your vehicle application. We recommend the Front Shock: EXP917580 and Rear Shock: EXP925543 Thank you.

A: Hello TJ, We always suggest upgrading the factory shocks to a nicer riding shock. We suggest the Front Shock: EXP917580. Thank you.

A: Hello mac, The Pro Comp Suspension Nitro 2.25 Inch Lift Kit comes with everything you will need to fully install on your vehicle. No brake line relocation is required. Thank you.

A: Hello Dario2raw, No, you will end up with a catastrophic failure. Adding any further lift height to the suspension of the vehicle creates drastic steering angles that will fail. If you need more lift you should take a look at a body lift.

A: Oscar, this is the correct leveling kit and the Fox shocks part#s are rears FOX980-24-660 and for the fronts FOX985-24-097 thanks for the question.

A: Hello JCM, The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key will require front shocks EXP918501 x2

A: Hello Anger806, the Pro comp level lift part# Exp63150 will allow you to clear a 33" tall tire. Thank you for your inquiry.

A: Thanks for the inquiry bill, the Pro Comp Suspension 2.25 Inch Level Lift Torsion Key part # EXP61230 will help you clear a 33 inch tire or a 285/70/17.

A: Hello Gerry, Thank you for asking. The Pro Comp Suspension 2.25 Inch Level Lift Torsion Key does not come with any tools. http://jo.my/etyebj http://jo.my/bxlq5j

A: Greg,Thanks for the question.Part #EXP63155K will lift the front of your vehicle 2.25" & a 1" in the rear.

A: Hello Off Road enthusiast, Thank you for asking. The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key are for truck and SUV models. We are not familiar with that vehicle and are not sure what parts will work for it.

A: Hello kevo and thank you for your question! we do sell the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key, but we do have any factory specs.

A: No this is not for a F150 you have struts and need strut spacers part number EXP62160

A: Thanks for the question Leeway Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K Sorry, but they do not make a nitro kit for your vehicle. You will have to get the torsion keys and an add a leaf kit separate. Thank you Answer box sales

A: Yes it will work on your truck

A: Hello tom from ft worth tx and thank you for your inquiry on the Pro Comp Suspension 2.25 Inch Level Lift Torsion Key. This kit will only fit the 4 Wheel Drive model. Here is a link for a kit that will work for you: http://jo.my/p532x3.qrcode

A: Hello T-daff, Thank you for asking. The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key will work on your 2004 Chevy Silverado 1500. This kit comes with shock extension brackets so you can utilize your factory shocks.

A: Hello Aldo, the Pro Comp Suspension 2.25 Inch Level Lift Torsion Key part# EXP62170 does fit your vehicle. Sorry for the inconvenience and thank you for choosing 4 wheel parts.

A: Hello Rob. The Pro Comp Suspension Nitro 2.25 Inch Lift Kit, part # EXP63155K, will fit the 06' Suburban. Thank you

A: Hello there, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit part number EXP63155K will work with 2001 Suburban with Autoride. Requires wheel alignment after installation. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: dmax, thank you for your inquiry on the Pro Comp Suspension 2.5 Inch Leveling Kit. With the leveling kit you will be able to fit up to a 33" tire.The stock/factory size tires will still fit, but will look a bit small. Here are some tires that would look great too: http://jo.my/b332ac.qrcode

A: Kyle, We don't recommend adding a level kit with a 6" lift kit. usually it will bind up the ball joints, rip the cv boots and have problems with alignment. You can just crank your factory torsion bars a little if you want.

A: newbie from phx. Thanks for the question.Part #exp63155k is not recomended for the yukon denali AWD.There is a possibilty of vibration.

A: Champ from Cowansville Quebec, Thanks for the question.EXP63155K will fit on your gmc sierra 2007 classic 1500 4x4 perfect. This kit will level your your truck as well.

A: Thanks for the inquiry del0373, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit part # EXP63155K will clear a 33 inch tall tire.

A: Hello Austin, the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key part# EXP63150 will not work with a leaf spring suspension. Thank you for your inquiry.

A: Hello Matt, the Pro Comp Suspension 2 Inch Level Lift Torsion Key part# EXP61151 have a different clocking position than the stock keys so that you end up with 2 inches of lift without cranking them. This prevents the stiff ride from the keys bottoming out against the frame. I would not advise turning them past the 2 inches because this will cause ball joint and cv axle issues. Thank you for your inquiry.

A: Hello Trey, Thank you for the question. This part number will not fit your vehicle application. The Skyjacker 2 Inch Torsion Key Leveling Kit Part Number: SKYC103KE will only for the vehicles equip with the Factory Color Codes Orange/Green/White/Brown torsion keys. The Skyjacker 2 Inch Torsion Key Leveling Kit Part Number: SKYC102KE will only fit the Factory Color Codes Purple/Blue /Yellow. You will need to climb under your vehicle and see what your vehicles key color code is.

A: Hello D, Thank you for the question. Aftermarket torsion keys are 25% stronger then factory and will give you a 2.5" leveling lift while keeping the factory spring rate. Cranking up the factory torsion keys will create a stiffer rate and increase risk of key/torsion bar failure.

A: Hello Dan, Thank you for the question. This kit will fit with ride control.

A: Hello B-rad, Thank you for the question. We recommend the Pro Comp Pro Runner shock package part number S/DShockingZXMono

A: Hello jazzyjay, Thank you for the question. This part fits your vehicle: 2008 DODGE DURANGO SLT V8 - 5.7 Liter - GAS

A: Drae- Thanks for the question. The Pro Comp Suspension Nitro 2.25 Inch Lift Kit will lift 2.25 in the front and 1.5 inches in the rear.

A: Pete- Thanks for the question. The max tire size for the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key on your 04 Avalnche z71 is 32 x 11.50 which is the standard measurement for a 305 50 r20

A: Hello Lucas, Thank you for the question. Technical Details:Fits 1999 to 2006 GM Avalanche, Suburban, Escalade, Tahoe, Denali and Yukon 2WD and 4WD - 2.5 Inch Lift with Max Tire Size: 32x11.50 - Recommended Front Shock: EXP917580

A: Niceride85- Thanks for the question. The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key will fit your 06 Sierra Z71. The Z71 has a lift on it from the factory in their "off road suspension package". Pushing the stock suspension further could cause issue with CV joints and Tie rod ends. You might consider going up to a 6 inch lift found here http://jo.my/s6z2a4

A: Peach- Thank you for your question. The Torsion key kit that will fit your 05 silverado 1500 can be found here http://jo.my/qy0b20

A: John- Thank you for your question. The Pro Comp Suspension 2.5 Inch Level Lift Torsion Key are forged then CNC machined for precision fitment.

A: Hello Thomas, Thank you for the question. Yes, you can do the installed with a torsion key removal tool and a few other basic hand tools. Once you have installed this kit I suggest you have the vehicle professionally aligned.

A: Hello Morgan, Thank you for the question. This kit will not fit your vehicle application.

A: Wkdb8- thank you for your question. The Pro Comp Suspension Nitro 2.25 Inch Lift Kit will fit your 01 suburban with Torsion bar front suspension.

A: Hi Qkay This kit is complete and will not require any other components to complete the install. this kit comes with shock extensions Thank You

A: Bobby- Thanks for the question. Yes the rear spring spacers in the Pro Comp Suspension Nitro 2.25 Inch Lift Kit would be compatable with the springs in your Pro Comp 6 inch lift kit on your 2003 Chevy Tahoe Z71

A: Hello Jonathan, You will use the factory springs with the Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K. Thank you for the email.

A: Hello David, We recommend you upgrade to the Front Shock: EXP917580 and Rear Shock: EXP925543. Thank you for the email.

A: Hello bjohnson, No additional parts are needed with the installation of the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key EXP63200. Thank you for the email.

A: Hello Chase, Yes, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K will fit your vehicle application. Thank you for the email.

A: Hello lukimazit, With the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key EXP63150 installation you will need to have the vehicle alignment done. This will put the vehicle back into a factory spec. You can expect near stock wear on the ball joints and cv's. I would suggest the front Bilstein 5100 Series Shock Absorber BIL24-186643 http://jo.my/807ys7 and rear BIL24-186742 http://jo.my/tg1awo Thank you for the email.

A: Hello Ryan, We Recommended Front Shock: EXP917580 http://jo.my/d6rlcr and Rear Shock: EXP925543 http://jo.my/2c75xm for the Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K. Thank you for the email.

A: Hello Jacob, We recommend the front EXP917552 http://jo.my/xizoz9 for the Pro Comp Suspension 2.5 Inch Level Lift Torsion Key EXP63200.

A: Hello Timbo, By adding the Pro Comp Suspension Nitro 2.25 Inch Lift Kit EXP63155K the vehicle will sit level. The front torsion keys are adjustable to gain or lower the ride height. We recommend you upgrade the front shock EXP917580 http://jo.my/d6rlcr and rear shock EXP925543 http://jo.my/2c75xm Thank you for the email.

A: Depending on if you have any accessories such as aftermarket front bumper or winch this Pro Comp Nitro 2.25 inch suspension kit should bring the front of your truck to level.

A: This ProComp Suspension kit does not require the shocks to be replaced.