Pro Comp Level Lift Nitro Kits

A: 1 inch.

A: 1 inch rear, 2.5 inch front.

A: No the lines are not long enough

A: No reason it shouldn’t so long as you don’t over stretch any of the lines to the shocks.

A: 2010 Nissan Frontier PRO-4X is listed | 2 1/2” Front & 1 1/2” Rear Spacer Kit | Max Tire Size: 33 inch. Cut & Copy this to your browser: https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/64660K_INST.pdf

A: You do NOT need bigger tired for the lift kit, I have the same one on mine and it actually allows you to fit up 35 12.50r17

A: Not Sure, i would look at the bolt pattern and see if it will fit under the upper arm.

A: Yes, this will fit a 2022 Toyota 4Runner TRD Sport. No, you will not need longer shocks. Your stock shocks will work.

A: Use the Pro Comp Nitro 2.5 Inch Leveling Lift Kit Part #EXP61183K

A: 1 inch rear blocks

A: Will not work with air ride.

A: Yes you can.

A: Max Tire Size: 33x12.50 inch. 295/70/18 = 34.3/11.6

A: Rear shocks are recommended but not required for use of this kit.

A: Rebel 1500 4WD? This kit would fit: https://www.4wheelparts.com/p/pro-comp-nitro-2-5-inch-leveling-lift-kit-61183k/_/R-DFCW-61183K

A: Leveling kits usually include spacers. Spacers do not add additional weight carry, they only lift the vehicle. The 65210K will lift a stock weighted vehicle 3” in front, but the suspension will sag with additional weight, so you will need to know how much weight you are going to carry and add the height needed.

A: The max tire size is 33".

A: This kit can be used with stock or aftermarket wheels.

A: Hello, There is no need to replace the shocks and struts (if they are in working order). It will give you a light lift by using spacers. Thanks for checking us out.

A: On what kind of vehicle? We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

A: All of our kits are made for 4WD models only.

A: Yes it will fit.

A: No this kit is for GM Mid-size SUVs

A: 2021 F-150s are a new generation and we have not had the opportunity to test our products yet. Thus we can not confirm that it will

A: The 65210K will work on 06-18 4Runners. No spring seat hubs needed for rear. Stock shocks will work with this kit.

A: Yes this would work for your application

A: Yes it will work with KDSS

A: Yes this would fit your truck. Install could take a few hours. Please contact your local 4WP store for more information on length of install.

A: If installing this kit on a 2010 and newer 4Runner, you will need a rear upper isolator from a FJ cruiser - part number 48302-35040, or you will need to cut out center of isolator for rear spacer to fit properly.

A: Yes this kit will work on your 4Runner.

A: Hi Nick, To check if the Pro Comp Nitro 3 Inch Leveling Lift Kit will clear wheels that large would be to call our customer service center @ 877-474-4821 and speak to one of our specialist

A: Thanks for the inquiry Snooker, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks part # EXP62206K those will fit no problem.

A: Hello Michael, Technical Details: Lift Height: 2.5 Inch front, 1 Inch rear.

A: Hello Enrique, You will need part number Part Number: S/DShockingBIL5100w/FRTStrut. this will get you the two front struts and two rear shocks needed. Thank you for the question.

A: Thanks for the inquiry Erdub54, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP65205K our stores charge $320.00 for installation.

A: Hello Older Guy The EXP65225 will fit your 2007 Tundra perfectly and it will give it 2.5 inches of lift in the front. It does come with the differential drop. Thank You for your question. Jon Snyder 4Wheelparts

A: Thanks for the inquiry Roy, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks part # EXP62206K with this lift the truck will sit level.

A: Thanks for the inquiry ike, the American Racing Wheels AR901, 17x8.5 with 8 on 6.5 Bolt Pattern - Chrome part # W/PAR90178580820 here is an option we don't offer many dually wheels, http://jo.my/yg9rmj , http://jo.my/l4acsm

A: Thanks for the inquiry newfors, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks part # EXP62206K 35's will rub ALOT, if you install you have to use a + or positive offset on the wheel and do quite a bit of plastic trimming.

A: Hello HAWN and thank you for your question! Pro Comp Suspension Nitro 3 Inch Lift Kit will not need longer shocks. the kit comes with strut spacers for the front and 1" lift blocks for the rear.

A: Hello Rob The EXP66150 is about a 6 hour job and we charge for 5 shop hours at our 4Wheelparts Stores. In addition it will take another hour to align the front end after the kit is installed. On a 2012 and newer JK their is and additional exhaust spacer kit that is required in order for the front driveshaft to clear the exhaust cross over pipe. The exhaust spacer kit is part number R/ERE4532 and it costs $45.99 and we charge for 2 shop hours to install it. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello Willikens, Yes, you can run a 285/70R17 tire. With the factory wheel you may be required to trim some of the inner wheel wells to clear. Pro Comp Suspension recommends an aftermarket wheel with a 4" to 5" backspace. If you do not want to trim you will need to run a 275/70R17 tire size. Thank you for the question.

A: Thanks for the inquiry Joe, the Pro Comp Suspension Nitro 2.5 Inch Lift Kit part # EXP63161K we recommend Bilstein 5100's part # BIL24-196451 FRT, BIL24-196468 RR or Fox Racing part # FOX980-24-963 FRT, FOX980-24-664 RR. These are some of the best shocks to buy without breaking the bank.

A: Hello Daniel, This kit is adjustable. It will allow you to eliminate the factory rake if you'd like. You can run the factory wheels with a 285/70 tire.

A: Hello Matt, Yes, this kit will lift the front 3" and the rear 2". This will level out the factory "Rake". Thank you.

A: Thanks for the inquiry 67sila, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP62220K unfortunately this product is not available for your vehicle.

A: Hello Roger, I highly recommend installing a pair of Pro Comp Uniball Upper A Arm with Billet Dust Cap EXP57001B to help correct the alignment of the vehicle. Thank you.

A: Hello Qball, That tire will fit with this lift. The issue remains on the wheel backspace. The will dictate how much the tire may or may not rub.

A: Hello Dave, Yes, a 295/55R20 will fit your vehicle with this installed. We suggest the Pro Comp Tires 295/55R20, Radial Xtreme A/T Part Number: PCT5055295. Thank you.

A: Hello Nick, No, you will need to upgrade wheels as well. Pro Comp Suspension requires a Max Tire Size: 35x12.50, Wheel Diameter: 19" or Larger, Wheel Width: 8" to 9.5" with a Backspace: 4" to 5.5". Thank you.

A: Hello Jhal, Yes, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer EXP61180 will fit your vehicle application. Thank you.

A: Thanks for the inquiry Jake, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer part # EXP61180 is for a 4X4 you can use part # DAYKC09103BK.

A: Hello Tyler, Here are the wheel and tire specs provided by Pro Comp Suspension: Max Tire Size: 33x12.50, Wheel Diameter: 16" and Larger, Wheel Width: 8" to 9", Backspace: 4" to 5". Thank you.

A: Thanks for the inquiry Tyler, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP65205K this can be installed with a coil compressor in your garage, we do recommend you align when done.

A: Hello MayhemSeven, Yes, the Pro Comp Suspension Nitro 3 Inch Lift Kit EXP65225K will fit the 2015 Tundra TRD Pro. Thank you.

A: Hello Tyler, Yes, the Pro Comp Suspension Nitro 3 Inch Lift Kit EXP65205K will allow you to run a 285/75 tire size. Thank you.

A: Thanks for the inquiry TRog, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP65205K will give enough clearance for 285's but you need to run wheel spacers with factory wheels or no more than 4.5 inches of back spacing on an after market wheel.

A: Hi TRog The EXP65205K will raise the front of a 2006 t0 2015 Tacoma 4X4 or Prerunner model 3 inches and the rear 1 inch. This will give you most of the clearance you will need to put on a LT285/75R17 inch tire. I am recommending a 17 inch rim to clear the large factory calipers that the newer Tacomas have. Almost all after market 16 inch rims will not clear the calipers. The stock 16 inch wheels are too far backspaced to allow a 285 width tire to fit because the tire will rub on the upper a arm. If you install G/293-83-125T wheel spacers on the front with the factory 16 inch wheels then you could kit the LT285/75R16 tire with some trimming of the front inner wheel well. The 17 inch set up would include and after market rim such as a Pro Comp Extreme Alloy in a 17x8 or a 17x8.5 with PXA21138 ET style lug nuts and the 17 inch tire with trimming of the inner wheel well up front. I hope this is helpful. Thank You Jon Snyder 4Wheelparts

A: Hello E-man, Yes, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer EXP61180 will fit your vehicle application. Thank you.

A: Hello Riley, Tire and Wheel Specs: Max Tire Size: 35" to 37", Wheel Diameter: 16" and Larger, Wheel Width: 8" to 10", Backspace: 4" to 5.75"

A: Hello Dinam, Yes, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks EXP62206K will fit your vehicle application. Thank you.

A: Hello Orlando, Yes, the Pro Comp Suspension Nitro 2.5 Inch Lift Kit EXP64660K will fit your vehicle application. Thank you.

A: Hello Rick, The Pro Comp Suspension Nitro 3 Inch Lift Kit comes with everything you need to install on your vehicle. The differential drop eliminates harsh CV axle angles that can damage the CV axle shafts. Anytime you lift a vehicle, you will lose a bit of the soft factory ride quality. If you are looking for a much nicer ride quality, we suggest you have a look at running a set of adjustable coiliover shocks in the front with a matching pair of shocks in the rear. Thank you.

A: Hello Rick, The Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer will fit your vehicle application. This kit will allow you to run a 35x12.50 tire. To run a 37" tire you will need a 3" body lift of cut the factory wheel wells. Thank you.

A: Hello DJ, Yes, the front strut spacers are mounted to the top of the factory strut. Cam bolts come with the Pro Comp Suspension Nitro 2.5 Inch Lift Kit. Thank you.

A: Hello enrique, I suggest the Fox Racing Shox 2.5 Factory Series Coilover Reservoir Shock Set Part Number: FOX880-02-953 for the front and Fox Racing Shox 2.0 Performance Series IFP Shock Part Number: FOX980-24-679

A: Pat, The largest tire you can run is a 33x12.50 hope that helps thanks for the question.

A: Hello Phil, According to Pro Comp this will only fit the 4WD vehicle. Unfortunately we do not engineer the products so we are unaware as to why it will not fit the 2wd. Please feel free to contact Pro Comp directly.

A: Hello Shadow, Yes, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer EXP61180 will fit your vehicle application. Thank you for the question.

A: Brendan, the largest tire you can fit with this kit is a 32x11.50. Thank you for your question.

A: Chase, that description is wrong it will work on your 2014 1500 Ram as long as its not a TRX4 model. Thank you for your question.

A: Brendan, this kit will only allow a maximum tire of 35x12.50 the 14" wide tire would not clear. Thank you for your question.

A: Hello Relentless, The Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer will get you 2.5" lift.

A: Hello Brad, the Pro Comp Suspension Nitro 3 Inch Lift Kit part# EXP62220K will only fit the 2009-2012 f -150. Thank you for your question.

A: Hello Techy, the Pro Comp Suspension Nitro 2.5 Inch Lift Kit part# EXP64660K should work on your 2014 Frontier. As far as we know no changed have been made to the vehicle. Thank you for your inquiry.

A: Hello Bmoore, the Pro Comp Suspension Nitro 2.5 Inch Lift Kit - 4WD w/Tow Package part# EXP62663K will fit your 2014 ford f-350 4x4 crew cab. Thank you for your question.

A: Thanks for the inquiry Wayne, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit part #EXP63165K is for an SUV, use part # EXP 63235 and rear block kit if you want part # EXP63152.

A: Hello DaninTN and thank you for your question! Pro Comp Suspension Nitro 2.5 Inch Lift Kit - 4WD w/Tow Package will work for your 2013 F-350.

A: Hello there, the Pro Comp Suspension Nitro 2.25 Inch Lift Kit fits 2007 to 2013 GM 1500 (SUV) not trucks. If you you need to place an order please call me @ 3108685810 ext 5923. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.