A: I’ve got 3 of them on 3 different vehicles and have never noticed any additional noise 

A: Yes Yes, 100% yes.  2 solutions truly worked for me and approx 16 other Jeepers I regularly road with.   1- cover your light bar with either a 360° cloth or clear acetate cover during daily driving and remove for lower speed off-road.  Those C shaped fin inserts didn’t work for me or my buddy’s.   2- My favorite and final solution to the 60” Pro Comp light bar noise…. Remove and replace with a 3 part light bar system with KC cubes on the A-Pillars. No noise, better look, more original 

A: No. Also don’t mess with anything once it breaks just take it up there. I opened up the box that controls the pro comp lights to see if maybe it had water in it. Bad idea that voided the warranty because I opened it. 

A: Yes it does.

A: Mine did until I installed the black door edge guard over the metal fins on the back.  It was not a whistle but a loud roar that started at 45mph and then it just got louder the faster you go. Now it is good!

A: It depends on where you are mounting it. If you mount it above your windshield frame, you will hear a whistle at high speeds.

A: Yes, the install kit included has longer bolts with 1” spacers for each side so it will fit in a 52” wide space.

A: Fishbone's bracket is designed to mount a 52" overall width light bar.

A: Mine are 13" with the ears out. If they get mounted ears in I think it would be close to 11.

A: The Pro Comp Motorsports Series 10" Double Row LED Combo Spot/ Flood Light Bar - PN: EXP75210 Is 10"

A: Unfortunately this light bar mount is 20 1/2" may have to fabricate something. Or you might consider something like Part Number: BAJ557803

A: 12.3 amps.

A: 7.6 Amps

A: Yes it will fit

A: Yes - Any switch can be used to fire the Led light bars.

A: Currently, the lights have a lifetime warranty against defects in materials and manufacturing.

A: 14,280 is the correct lumens. Our site was incorrect.

A: Yes, the Pro Comp Motorsports Series 50" Double Row LED Combo Spot/ Flood Light Bar - 75250 includes a wiring harness.

A: 21.5” mount to mount

A: Outer housing dimensions: 8” wide x 2.75” tall x 2” depth

A: 47,000 is correct

A: Hello 40's, The amp draw is 5.97. Thank you for the question.

A: Hello Joshua, The LED bar itself is waterproof but the connectors are not marine grade.

A: Hi Skyhigh The Exp76410 IS an excellent choice it would nicely on the Poison Spider Brawler Lite Front Bumper part # PSC17-59-010DBT. This is a mid width-hi clearance bumper with an over rider that has light tabs. The bumper looks great and has recessed buckets to mount the factory fog lamps. You may need a simple to make adapter to mount the LED light bar to the light tabs. I recommend a piece of 2 inch by 1/8 inch thick steel flat stock, Then drill 2 holes for bolting it to the light tabs and 2 holes for the LED light bar to bolt to and then give it to the painter or powder coater that is doing your bumper. I hope this helps. Thank You Jon Snyder 4Wheelparts pa

A: Thanks for the inquiry Gairman, the Pro Comp Suspension DR12 DOUBLE ROW LED FLOOD/SPOT/COMP PATTERN part # EXP76410 unfortunately we don't offer a roof mount for your vehicle.

A: The Pro Comp Suspension DR12 DOUBLE ROW LED FLOOD/SPOT/COMP PATTERN is a very bright light and should do the trick just fine. Hope this helps!

A: Thanks for the question Wen Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP PATTERN EXP76320 This light is going to be a little short for going over the windshield. Most LED lights that stretch across the top of your vehicle are going to be 50 inch LED lights. This will work if you are mounting it on a roof rack. Thank you Answer box sales

A: Hello Rachel, the Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP PATTERN part# EXP76320 will fit your vehicle. This is a universal light bar that you can mount anywhere you would like. Thank you for your inquiry.

A: Hello there, the Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP part number EXP76320 is correct. The advertised lumens are accurate. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Bronwguy- Thanks for your question. The Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP PATTERN can be made to fit on the roof of your 08 FJ cruiser but it will require an additional mount or the need to fabricate one.

A: Jim- Thank you for your question. The Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP PATTERN wiring kit is designed to work from the front of your truck to the dash. Length of the power leads is fairly short. You should plan on using the components in the kit but using your own marine grade wire.

A: SM- Thank you for your question. The outer 4 LED's on both sides are flood. If you are looking to spot out over 50 yards I would recommend the HID spot found here http://jo.my/hv7wmg or the LED pair of spot lights http://jo.my/hcw797

A: Ryan04LJ- Thank you for your question. The lighting patterns are really up to your personal taste. I can say from my experience and the description of the type of wheeling you are looking to do, I would mount the Pro Comp Suspension DR12 DOUBLE ROW LED FLOOD/SPOT/COMP PATTERN on the front bumper and maybe on top of a winch later. The two Cubes on the wind shield bracket in a flood pattern. The main light will give you the distance ahead and the floods on the sides will allow cover the sides of the trail.

A: Hello Chad, Thank you for the question. Yes, the Pro Comp Suspension SR24 SINGLE ROW LED FLOOD/SPOT/COMP PATTERN Part Number: EXP76320 will fit your vehicle application.