Pro Comp Front Coil Springs

A: It would depend on the size of your spring bucket. 

A: Fits:1996-1982 Ford F-150 and Ford Bronco

A: If you have the correct drop brackets for the radius arms and beams, these coils should fit any 80-96 F-150.

A: 1993-1998 Jeep Grand Cherokee (ZJ) Pro Comp 3-4.5″ Lift Front Coil Springs (checking with Pro Comp on the specs)

A: Free Length (Inches) 21.5 Spring I.D. (Inches) 3.81 Wire Diameter (Inches) 0.843 Weight (Lbs) 30.72 Spring Rate (Lbs/ Inches) 640 Spring Location: Front =

A: You may look for the OEM replacement Isolators, The 1990-1995 Toyota 4Runner 2WD/4WD - 1 1/4" Leveling Kit Rear by Daystar KT09100BK is the only one available. OEM isolators are used with Pro Comp Spring.

A: What is the year make and model of the truck? Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: Well I liked the 2inch lift springs so much I bought the 4.5inch springs when I needed more lift. They ride pretty smoothly.

A: No they will not fit an XJ. They are JK Wrangler coil springs. Sold as a pair.

A: No, 0-2” lift does not require drops. 3”+ will require drops.

A: We need some more information about your set up. What size springs are you running now? Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: Pro Comp Lifted Springs are generally 10% stiffer than stock spring rates. Weight is 29.22 and spring rate is 450 lbs.

A: We need more information on the vehicle you are working on to be able to assist you from here. Please call our sales team with more information on your vehicle: Toll Free: 1-877-474-4821

A: In theory, yes the 7” Pro Comp coils will install into the 6” Fabtech kit. The alignment will be a little more difficult with the additional height.

A: Free Length (Inches) 18.87

A: Technically the springs do the lifting but no, you will need more than just springs to be able to install and drive it. We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

A: Spring rate is 273 lbs/inch. Free length is 15.24".

A: These springs fit JK Wrangler models.

A: Hi Ny, These springs are part of a 2 inch lift kit and will lift the vehicle 2 inches over stock ride height. Other parts will be necessary for proper vehicle operation. Contact our customer service center @ 877-474-4821

A: Hello Carlos, Yes, you could remove your spring and coil spacer and replace it with this coil spring. Thank you.

A: Thanks for the inquiry Anthony, the Pro Comp Suspension 6 Inch Lift Front Coil Springs part # EXP24615 the SPRING RATE...LBS/IN...740.

A: Hello Barlow, You will need arm drop brackets, longer sway bar links, sway bar drop brackets, longer shocks, longer brake lines, drop pitman arm, ttb axle drop brackets and hardware.

A: Hello mudking, No, the Pro Comp Suspension 7 Inch Lift Front Coil Springs will not fit your vehicle application. Thank you.

A: Hi Jesse, These coils are for a Ford Ranger. They will not work on your fullsize diesel truck. You might want to call John at Autofab at 619-562-1740 He specializes in Ford 2WD Twin I-Beam trucks Thank You Jon Snyder 4Wheelparts

A: Hello BB3, We suggest adding longer shocks. Here is a kit Pro Comp Suspension 2 Inch Lift Kit with ES3000 Shocks Part Number: EXPK4085

A: Hello Jason, This will not fit your vehicle application.

A: Sir, these are designed for the diesel Ford 250 and will not work for your truck you have struts and do have those for sale. Thanks for your question.

A: Thanks for the inquiry chevy, the Pro Comp Suspension 7 Inch Lift Front Coil Springs part # EXP14514 the lift coils will require many more parts to accompany 7 inch lift springs.

A: Hello 2004dodgeram, The Pro Comp Suspension 6 Inch Lift Front Coil Springs will require longer shocks.

A: Thanks for the inquiry Kelly, the Pro Comp Suspension 7 Inch Lift Front Coil Springs part # EXP14514 please refer to pro comp directly for that info 800-776-0767.

A: Thanks for the inquiry Isaac, the Pro Comp Suspension 6 Inch Lift Front Coil Springs part # EXP24515 the parts only come grey but you can have them painted or powder coated.

A: Thanks for the inquiry jimbo, the Pro Comp Suspension 4 Inch Lift Front Coil Springs part # EXP24412 this is correct for front 4 inch coils for a 87 Bronco.

A: Hello Jeff, Thank you for asking. The Pro Comp Suspension 4 Inch Lift Rear Coil Springs add 4" of lift. You replace your old springs with these 4" lift, it will cause your vehicle to nose dive.

A: Zero,Thanks for the question.Part # EXP14514 will lift the front of your truck 7 more inches

A: Tom- Thanks for your question. The Pro Comp Suspension 4 Inch Lift Front Coil Springs will fit your 94 ford F150. You would need to remove the spacer as well. Your caster and camber angles will be off if you do not get a relocation bracket set.

A: The Pro Comp Suspension 4 Inch Lift Rear Coil Springs will work on the 4 Runner with a 4" lift all ready installed. If the truck is not lifted you will need several other components to make them work. Hope this helps!

A: No you will need to install the whole suspension kit to install the coils.

A: Hello If you are working on a TTB axle you will need all the below. you will need center hinge brackets, pitman arm, radius arm brackets, brake lines, alignment cams, sway bar end links. You may also need a new front drive shaft.

A: Yes when installing the Pro Comp Suspension 7 Inch Lift Front Coil Springs you will replace the stock coils and spacers. Everything you need comes with the kit. Hope this helps!

A: Hello Harold, The Pro Comp Suspension 2 Inch Lift Front Coil Springs have the same diameter as the factory springs.

A: Hello Nick and thank you for your question! To correctly install Pro Comp Suspension 3 Inch Lift Front Coil Springs and 2.5" rear springs you would need the front track bar and the rear track bar bracket. You could use the kit number EXPK3059B for everything you would need.

A: Hello revit, the Pro Comp Suspension 7 Inch Lift Front Coil Springs part# EXP14514 will be a great replacement for your current springs and spacers. Thank you for your inquiry.

A: Thanks for the inquiry Matthew, the Pro Comp Suspension 6 Inch Lift Front Coil Springs part # EXP24613 is for a super cab and part # EXP24612 is for a standard cab.

A: Thanks fir the inquiry Matthew, the Pro Comp Suspension 6 Inch Lift Front Coil Springs part # EXP24612 is for a standard cab and part # EXP24613 is for a super cab.

A: Jake, These springs are for a 1990-1996 ford F150 or Bronco 4x4. Your 1997 F150 is different and these will not fit. If your truck is a 4x4 it has torsion bars if its 2wd it has coil springs but you will need upper control arms to install a 3" coil spring. You cannot just install larger springs without the other suspension parts.

A: Josh, These coils only work with the full pro comp lift kit. The kit drops the lower control arms when using these coils. If you installed these they would end up maxing out your ball joints and breaking them without the cross member drops. The 2" spacer you already have is really the max without installing a full lift kit.

A: Austin- Thanks for the question. The TTB ford ranger can not mount the Pro Comp Suspension 5 Inch Lift Front Coil Springs with out substantial modification.

A: Brett, Thanks for asking. Pro Comp Suspension 6 Inch Lift Front Coil Springs part# exp52160 are for a 2002-2005 Ram 1500 with a 6" lift. If you are interested in springs for your vehicle, We do carry Skyjacker lift soft ride springs. They come in 2", 4" and 7" lift sizes. Verify how many inches of lift you have so we can determine which ones will work for you. If you are interested you can reach me at 800-337-9005 ext:3829.

A: Hello Graannnt, Thank you for the question. This coil spring will not fit your vehicle application.

A: Hello AustinC, Thank you for the question. Yes, this coil spring will fit your vehicle application.

A: Hello jasona5150, Thank you for the question. The fit the 1982 to 1996 Ford F150 and Bronco 2WD and 4WD.

A: Hello Justin, Yes, you will need longer shocks, longer brake lines, control arms just to name a few parts.

A: Ryan- Thanks for the question. Going all spring is a great way to go. Unfortunalty without knowing the original manufacturer of you lift kit I can not say if these coils will fit your 03 siverado 1500 2wd.

A: Hello Anthony, Thank you for the question. You will also need sway bar extension brackets, longer brake lines, longer shocks, adjustable track bar, track bar drop bracket, pitman arm, adjustable control arms and hardware.

A: Leslie- Thank you for your question. The free standing height of the Pro Comp Suspension 6 Inch Lift Front Coil Springs is 22 inches, wire diameter is .781 inches. ID 2.875 inches

A: E- Thank you for your question. The Pro Comp Suspension 6 Inch Lift Front Coil Springs should be powder coated gray. They should also have the part number stamped into them.

A: Jonny- Thank you for your question. The Pro Comp Suspension 4 Inch Lift Front Coil Springs part number EXP24412 has a spring rate of 475 lbs and is supposed to be for the standard cab. The part number EXP24413 has a spring rate of 485 lbs and is for the extended cab.

A: Hello Adam, No, this will not fit your vehicle application. We currently do not offer a list spring for your vehicle. Thank you for the email.

A: Hello Bear, Yes, you will need longer shocks to install the Pro Comp Suspension 4 Inch Lift Rear Coil Springs EXP57490. depending on your vehicle application you may also need longer brake lines and adjustable track bar. Thank you for the email.

A: Hello Armando, You would need longer shocks, longer brake lines, adjustable control arms, adjustable track bar and mount, taller bump stops and a driveshaft spacer,. Thank you for the email.

A: Hello Jim, Yes, you can install the Pro Comp Suspension 2 Inch Lift Front Coil Springs EXP55297 to level the vehicle. Please note you will need longer front shocks. Thank you for the email.

A: Hello Alex, The Pro Comp Suspension 6 Inch Lift Front Coil Springs EXP52160 are designed for the 4x4. Thank you for the email.

A: Joe it is not advisable to just stick a pair of 4" lifted springs into a Ford F150 or Bronco. You will require a lot of additional components to complete a lift on the Ford Twin Traction Beam Front axle. I would recommend the purchase of a complete suspension system so you dont have any problems with your truck. http://jo.my/h1444d Thank your

A: Rick there are many other components required when lifting a truck. You cannot just shove a set of springs in to your vehicle and expect it to work. The truck that the springs in question are made to fit require Spindles and drop brackets to accommodate the lift. the rack and pinion can not be moved thus the custom spindles move the steering back where it needs to be to compensate for the lift. The EXPK1078BMX http://jo.my/8nayn1 is a complete suspension kit with all the components required to properly lift a 1999-2007 Chevrolet 1500 2WD Thank you for your inquiry

A: Tyler the Pro Comp Cil Spring Part Number EXP14514 measures 21.87" free standing height with a 5.82" O.D.The Wire Diameter is .906" with a spring rate of 1065 per inch. the I.D. is 4.04" Thank You For Your Time

A: Todd- Thanks for the question. The Pro Comp 6 inch lift front coil springs should work with a Fabtech 6 inch lift for your 2012 Ford F-250SD.

A: Jacob- Thanks for the question. The Pro Comp 4 inch lift coil spring used without the drop bracket may cause suspension angles that could possibly over extend the control arms and damage the ball joints.

A: This ProComp Suspension Coil Spring is a 4 inch lift spring. The note in the description is because it is included in the 6 inch lift kit which uses other components to achieve the 6 inch lift.