Pro Comp ES9000 Series Shocks

A: Yes if you buy the right ones. You have to measure. 

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

A: On my 2004 f250 back shocks are longer then front but mine runs stock in front for shock size. 

A: These are universal shocks. If your mounting ends are the same and the lengths are what you need, can you run these front or rear.

A: I think you could but would lose some up-travel

A: Yes they can, I used them on my Jeep with no lift

A: We need more information on your vehicle to confirm fitment. What year is your Cherokee, is it lifted? Please call our sale team for further assistance Toll Free: 1-877-474-4821

A: We need to know what vehicle you are working on. Please call our sales team for further information Toll Free: 1-877-474-4821

A: Extended 29.98" Compressed: 18.24" Travel: 11.74"

A: The Top mount is a Loop and lower mounts is clevis.

A: The 914515 is for 0” lifts. For 3” lift, use part number 917515.

A: Normally, spindle lifts do not change shock length. Without seeing if the spindles you have change the length needed for shocks, I could not say. For 2-3” torsion key lift – a 916015 shock would be used.

A: We need more information on your vehicle to confirm fitment. What year, is it lifted? Please call our sale team for further assistance Toll Free: 1-877-474-4821

A: No - this is a 0" lift shock.

A: I don’t think so. Mine are on a factory 2003 Ford explorer sport Trac. I would check with your local 4 wheel parts, because I do know they make these for lifted vehicles.

A: We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821

A: These shocks are sold individually, so you would need to order 2.

A: 99-04 F250/ F350 0-1 inch lift 922508 1-2 inch lift 924508 2-3 inch lift 925508

A: If the 2002 2500hd has a Pro comp 6” lift then you will need 920508 for front and 930001 for rear. If the lift kit is another brand, then you will need to check with that lift manufacturer for their shock recommendations.

A: It would depend on what brand spindle lift you are running. We need a bit more information. Please call our support team Toll Free: 1-877-474-4821

A: We have some other questions to help get you the correct shock for your truck. Please call our sales line Toll Free: 1-877-474-4821

A: No they will not work for you. They fit 0-2" lift height.

A: Yes - this shock fits 09-Current Ford F-150 with 6” lift regardless whether or not is 2WD or 4WD.

A: Thanks for the inquiry brad the swede, the Pro Comp Suspension ES9000 Series Shock Absorber part # EXP922508 this is just one shock, you would 2 front and 2 rear which will be different part #'s..

A: Hello Keith, No, this shock will not fit your vehicle application. Thank you for the question.

A: Hello Art, This shock only fits stock height vehicles. Thank you for the question.

A: Thanks for the inquiry Jay, the Pro Comp Suspension ES9000 Series Shock Absorber part # EXP925518 these are only available for the stock height EXP622053 front strut and EXP922518 rear.

A: Hello Bear, Yes, the Pro Comp Suspension ES9000 Series Shock Absorber EXP929504 is a direct bolt-on installation for your vehicle application. Thank you.

A: Hello Rosso, The ES3000 is a Hydraulic Oil Shock and the ES9000 is a Gas Charged shock. The gas shocks ride much nicer on and off-road.

A: Hello Sonny, We suggest the 4 Pro Comp ES9000 Shocks and 4 Black Shock Boots Part Number: S/DShockingES9000. This will get you the correct front and rear shocks for your vehicle application. Thank you.

A: Hello Dr, Yes, the Pro Comp Suspension ES9000 Series Shock Absorber will fit your vehicle application.

A: Hello This would be the rear shock on the S10's with no lift. The shock you will need is part number EXP 929509 Thanks

A: Hello Marc, the correct es 9000 package for your vehicle would be part# S/DShockingES9000. Thank you for your question.

A: Yes these will work for your f150 and we have a shocking deal with free boots on the website.

A: Thanks for the inquiry farmer, the Pro Comp Suspension ES9000 Series Shock Absorber part # EXP929510 will work on the rear of a 4X4 2000 F150 with a 6 inch lift.

A: Hello there, the Pro Comp ES9000 Series Shock Absorber will work fine with your Toyota Land Cruiser series 80 with a 2.5" inch lift. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello there, the Pro Comp ES9000 Series Shock Absorber will work with your 2000 Ford excursion. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the question. These will be for the rear of your vehicle. Thank you

A: Hello JC and thank your for the inquiry on the Pro Comp Suspension ES9000 Series Shock Absorbers. Here is the link to get you to the correct parts for your application: 1998 GMC 1500 4WD: FRONT: http://jo.my/uh2n5a.qrcode REAR: http://jo.my/unrqt5.qrcode

A: Hello Shirley, The Pro Comp Suspension ES9000 Series Shock Absorber only goes up to a 2.5"lift. Please lease look at these other shock options Skyjacker & Bilstein.

A: Hello Drewful, Thank you for asking. The Pro Comp Suspension ES9000 Series Shock Absorber are available for applications that are lifted 2.5-3"

A: Hello Jason and thank you for your question! Pro Comp Suspension ES9000 Series Shock Absorber are made for your 2002 Ranger.

A: Usually a 5/8 hole but the bushing sizes change depending on shock part numbers. What are you trying to accomplish do you need new bushings?

A: Hello Bobby, These Pro Comp Suspension ES9000 Series Shock Absorber EXP926508 is the correct part # for the front shock for that truck with a 4" lift .

A: They all use different bushings depending on the part number. Call Pro Comp with the part numbers you have and they can give you the bushing part numbers. 800-776-0767

A: Hello Dylan, the Pro Comp Suspension ES9000 Series Shock Absorbes will fit on your truck. If you order the package you will get the complete set part# Shockinges9000. Thank you for your inquiry.

A: Hello Mac, Thank you for asking. The Pro Comp Suspension ES9000 Series Shock Absorber are available for your truck with a leveling kit.

A: Hello JMPL and thank you for your question! Pro Comp Suspension ES9000 Series Shock Absorber would be 917500 for the front and 924509 for the rear.

A: Do it yourself youngster,Thanks for the question.You will need struts for the front of your truck.Use part #EXP622053.The rear replacement shock part # is part # EXP922518.These part #s are for a 2005 -2015 6 lug Toyota with no lift.

A: Hello Mark, the Pro Comp Suspension ES9000 Series Shock Absorbers can be mounted however you need them. They will not leak. Thank you for your inquiry.

A: Hello Loco, the Pro Comp Suspension ES9000 Series Shock Absorber are a great replacement shock for the rear of your vehicle We also offer the es 6000 replacement struts for the front. Thank you for your question.

A: Hello there, the Pro Comp ES9000 Series Shock Absorber will work on your truck just as long as we have the year make & model of your rig. Let us worrier about the part numbers. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello When you order state what size lift you have and they will adjust the sizes.

A: Hello Yes we have them for your size truck and lift. When you order add your lift size in the comment field.

A: Hello Mark, the Pro Comp Suspension ES9000 Series Shock Absorber part# EXP921513 does come with a new nut for the top stud however you will need to re use the bolt for the bottom. Thank you for your inquiry.

A: Mark,Thanks for the question.Part # EXP921513 will work on a front of a 90-95 Toyota 4runner with no suspension lift.

A: Hello Rod, the Pro Comp Suspension ES9000 Series Shock Absorbers will be a much smoother ride over the es 3000 shocks you currently have. They are nitrogen gas filled versus the hydraulic oil filled 3000 shocks. Thank you for your question.

A: Gary,Thanks for question. Pro Comp Suspension ES9000 Series Shock Absorber will work for lifted truck.We will need vehicle info to get you the correct shocks.

A: Hello Shaun, the Pro Comp Suspension ES9000 Series Shock Absorbers would be the best fit for your vehicle. The 9000 shocks are nitrogen gas filled which will help you with a smooth ride on the highway. Thank you for your questions.

A: Hello there, the Pro Comp ES9000 Series Shock Absorber will work fine with a stock height 2011 Silverado 5.3 Z71 package. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the question john, the correct part# for a 2" rear lift is EXP925518 for a 2-3" lift. The body lift does not affect the shock lenghth.

A: Hello Eddie and thank you for your question! Pro Comp Suspension ES9000 Series Shock Absorber part number EXP921513 is a rear shock for a stock height 1990 Toyota 4 Runner.

A: Hello Cris, Thank you for asking. These are not the correct ones for your vehicle. You will need http://jo.my/cjgd8v

A: Hello Scott, the Pro Comp Suspension ES9000 Series Shock Absorbers will work great on your 3" lift kit. Thank you for your inquiry.

A: Hello Tony, the Pro Comp Suspension ES9000 Series Shock Absorber part# EXP934008 will be long enough to accommodate your 12" lift. Thank you for your inquiry.

A: Nick, Yes these will work on your truck nothing extra is needed.

A: Randy, Thank you for asking.This specific part number will not fit your application. You will need part # EXP927503

A: Hello Scooter, the es 1000 is your entry level hydraulic shock. The es 3000 is also hydraulic but it is had a bigger body and piston. the es 9000 is a nitrogen gas shock. Thank you for your inquiry.

A: EXP929511 is the correct shocks for a Tundra with a 6" lift rear shock.

A: Hello there, the Pro Comp ES9000 Series Shock will not work with the Fabtech systems. This company requires there shocks on there kits. Here are the part numbers front is FT70001S and the rear part number is FTS7267.

A: Hello there, The Pro Comp ES9000 is the ultimate nitrogen gas charged shock absorber will fit front & back on all makes. With its twin tube design and 10 stage velocity sensitive valving, the ES9000 delivers not only a smooth, comfortable highway ride, but it also enhances off road handling and performance. Engineered for those driving enthusiasts demanding optimum capacity for heavy loads as well as the most demanding driving conditions. It’s a 1 3/8” nylon banded full displacement piston head and double welded shock mounts ensure maximum strength and long lasting durability.

A: Dr. X, Yes the Pro Comp Suspension ES9000 Series Shock Absorber will fit your Jeep with no lift.

A: Hello Tbo79, for Pro Comp Suspension ES9000 Series Shock Absorber you would need to know the collapsed and extended lengths of the shocks you have on your truck now.

A: John- Thanks for the question. The ES9000 shock for your 99 F250 super duty 4x4 front are the EXP22508, the rear are EXP932008.

A: Craig- Thanks for the question. We don't have any information on the E series vans. The numbers on the shock don't cross reference. Please look for a direct email with a way to look up the correct shock part numbers.

A: CCC, Thnak you for asking. The Pro Comp Suspension ES9000 Series Shock Absorber part# EXP924509 is not for your vehicle. Your vehicle has Strus in the front and rear shocks. If you would like a matching set you might want to look into http://jo.my/edlwm1 being that you have struts in the front, the price is going to be slightly higher.

A: Hello Bob, the Pro Comp Suspension ES9000 Series Shock Absorber part# EXP924509 will not fit your vehicle. Pro comp does offer this model shock for your truck though. Check out our shocking deals where they have complete packages available. Thank you for your inquiry.

A: Bill- Thanks for the question. The Pro Comp ES9000 shock that will fit your 01 F250 with 4.5 inches of lift is EXP926508 for the front, and EXP934008 in the rear.

A: Hello Boy Hilaw, Thank you for the question. Yes, this shock will fit your vehicle application.

A: Obama- Thanks for the question. The ES9000 to fit the rear of your s10 is part number EXP924509. The front would be an ES6000 part number EXP620500

A: Hello David, Thank you for the question. Yes, this shock will fit the rear of your vehicle application.

A: Nick- Thanks for the question. The Pro Comp Suspension ES9000 Series Shock Absorber do not come with boots.

A: Hello Doyle, Thank you for the question. Yes, the Pro Comp Suspension ES9000 Series Shock Absorber Part Number: EXP929508 will fit the front of your vehicle application.

A: Lil- Thank you for your question. The Pro Comp Suspension ES9000 Series Shock Absorber part number EXP926508 will fit yout 01 F350 with a 6 inch lift.

A: Nightrider- Thanks for your question. The Pro Comp Suspension ES9000 Series Shock Absorber will only fit your truck at stock height. The http://jo.my/yr6j88 fox shocks will fit your truck with the 2 inch lift blocks

A: Hello Kitch, Thank you for the question. This part fits your vehicle: 2002 CHEVROLET SILVERADO 1500 4WD

A: Tram- Thank you for your question. Yes the Pro Comp Suspension ES9000 Series Shock Absorber part number EXP920506 will fit your 02 Tacoma V6 2Wd with a 2.5 inch add a leaf in the rear. These will fit the rear only.

A: Hello Whitney, Thank you for the question. You are correct. That is the rear shock you will need for your vehicle application.

A: Hello Kyle, Thank you for the question. Yes, the Pro Comp Suspension ES9000 Series Shock Absorber EXP924509 will fit the rear of your vehicle provided you have a stock suspension.

A: Hello Baja, This is the correct part number for your vehicle application. Thank you for the email.

A: Hello Corey, Yes, this specific part number will fit the rear of the 2005 Jeep TJ Wrangler. Thank you for the email.

A: Hello Alfred, The correct part number is EXP920510 http://jo.my/a1k0e3 Thank you for the email.

A: Connor- Thanks for the inquiry. The Pro Comp ES9000 will work with your 1999 GMC Sonoma with a 4 inch lift. You can find the fronts here http://jo.my/ejhvw7 and the rears here http://jo.my/gyxh2y

A: If your Dodge is a 97-01 Dodge Ram then you will need this shock here for a stock height http://jo.my/w0dhvy

A: Yes the Pro Comp Suspension ES9000 Series Shock Absorber has an eyelet on both mounting points

A: John, It depends on the vehicle application. Some of our shocks for Jeep, Ford, Dodge and Chevy. See our website for correct fitment. Select shock absorbers, select your vehicle and see the attribute table on the lower left hand side of the page. This will help locate all shocks that fit your vehicle.

A: This Pro Comp ES9000 Series Shock Absorber will fit your Chevy 2500HD Long Bed with a 6.0L.

A: Doug, Pro Comp Suspension ES9000 Series Shock Absorber front is EXP929510 and the rear is EXP924509.

A: Matt, The extended length is 25.74" and collapsed length is 15.49" for the Pro Comp ES9000 Series Shock Absorber EXP924509