The twin tube cellular gas design of the ES3000 is engineered to substantially improve driving comfort and performance both on and off the road. With its 10 stage velocity sensitive valving, the ES3000 self adjusts to various road conditions while improving your vehicles handling characteristics. The large 5/8 inch chrome hardened piston rod and unique Teflon rebound stop delivers a comfortable highway ride and the ability to handle the most demanding driving conditions. With double welded shock mounts for maximum strength and the exclusive Pro Comp Suspension limited lifetime warranty, the ES3000 will ensure ultimate performance for as long as you own your vehicle.
Easy repacement, takes less than 30 min and makes all the difference. Fits my leveled truck well and ride is so much better
By Phil from Lasing MI
Product specifications are not same as factory....
This product is supposed to fit my truck and does not fit. It’s supposed to be the part number for my Chevy and when installing the bushing is bigger than factory shock bushing. Product is not accurate.
Will these fit a 2000 Tacoma 4x4 with a two inch lift?
Art from Irvine, CA on
Shocks do not lift a vehicle. These are just standard shocks not ride height adjustable. Thank you.
from Irvine, CA on
Will this work with a 2006 2500hd 4x4 with a 6 inch lift?
Lost in cost from on
The EXP326505 is not the correct shock for your truck. If you have a Pro Comp K1084B
6 inch lift which is a cross member and steering knuckle type kit that still has the upper a-arm in the stock location then you need 2 each EXP922010 for the front and 2 each
EXP930001 for the rear. These are Pro Comp ES9000 Series shocks. If you have an earlier style 6 inch lift that drops down the upper a-arm pivot point then you need 2 each of EXP920508 in the front. The rear would take 2 each of EXP930001.
Thank You for your question.
Jon Snyder 4Wheelparts
Hi. I have an FJ40 1971. Has been lifted 3" and I need a shock absorber that on staging position measures 19.5" from center to center. Would 321500 be the right choice?
Vlad from El Paso. Tx. on
Yes, this shock will be a direct bolt-on installation for the front of your 1971 Toyota Land Cruiser FJ40. Thank you.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now