Pro Comp Dual Steering Stabilizer Kits

A: I have it on a 2017 F250 with 37"tires. You can even leave the stock one on with it installed. Works great. No complaints whatsoever. Easy to install.

A: Yes the 2019 Ford F-250 Super Duty XLT is listed below in the Vehicle Fitment

A: Yes

A: This part will not fit your truck unless you have a 4 inch lift.  I have a 2 inch leveling kit on my 2010 F250 and it did not fit.  Further research on the manufacturer website stated truck required a 4 inch lift.

A: it works on my F-350 4 wheel drive diesel stock height. i know the 250's are a little lower ride height but it should be fine.

A: I installed it on my stock 2017 F250 and it fit like a glove! No clearance issues at all and no tweaking of anything to get it to fit. Out of the box, onto the truck.

A: I installed it on a 2017 F250 with no problem. It's easy to install. And you can also leave the factory stabilizer on. Real happy with it. It's been for almost 2 years. No problems.

A: Yes it will fit.

A: My 06 F250 is stock and everything fit just fine.

A: The 222582F will fit 0-8” lifts

A: Yes this will work with 20" wheels with no problems at all

A: This part will only fit your vehicle if you have a 2+“ lift.  My truck has the Rough Country 2” spacer lift and this dual stabilizer would not fit correctly.  Go to the Manufacturer website and check the part requirements.  I had to stay with the factory mount or lift my truck more.

A: From what I researched, yes.

A: Yes this will work.

A: I used them on the same vehicle, worked great, took about a lazy hour to install. Made a world of difference in the wandering and bump steer. You will be happy with this kit!

A: The Pro Comp Pro-M Dual Steering Stabilizer Kit - EXP222581PR will work with both.

A: 2017-2005 Ford F-250/F-350 Super Duty (Not tested on the F-450)

A: The Pro Comp Dual Steering Stabilizer Kit - 222582 | Replacement cylinders - 223500

A: Yes our fitment data shows it will fit the following: 2005-2017 F-350's & F-250's

A: Replacement cylinders #223500. Sold individually.

A: No unless you have a stranger axle

A: Yes they will fit.

A: Yes this will work.

A: One per side (opposing) set up

A: Hi LB, Yes, this Pro Comp Dual Steering Stabilizer Kit will fit a 2017 F250 4x4 at stock height all the way up to an 8 inch lift.

A: Hello No you do not need the boots to install this kit. I don't like running the boots myself they always get filled with water and dirt. Thanks

A: Hello Justin, This will not fit your vehicle application. We do offer the Skyjacker Dual Steering Stabilizer Kit Part Number: SKY9240 that will fit. Thank you.

A: Hello H2 Dude, No, this will not fit your vehicle application. We do offer the Skyjacker Dual Steering Stabilizer Kit Part Number: SKY9298 for your vehicle. Thank you for the question.

A: Hello Ben, Yes, this will fit your vehicle application. Thank you.

A: Hello Beetle, The EXP222582 comes with a basic ES2000 series stabilizer (Oil Filled) and the EXP222582Z comes with the Pro Runner series stabilizers (Gas Charged). I'd suggest going with the EXP222582Z. Thank you.

A: Hello sladie, The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit EXP222582Z will fit your vehicle application. However, the dealership maybe correct about the tires being out of round and may have belts that are starting to fray. This is common with high mileage tires. We see it often more than not. Thank you.

A: Thanks for the inquiry Jeff, the Pro Comp Suspension Dual Steering Stabilizer Kit part # EXP222582 the replacement cylinder is part # EXP223500.

A: Thanks for the inquiry Chris, the Pro Comp Suspension Dual Steering Stabilizer Kit part # EXP224301 this will work on a 2x4 Fod F-150.

A: Hello there, the Pro Comp Suspension Dual Steering Stabilizer Kit will fit 2006 F250. All that we need is the year make & model. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello J, Thank you for asking. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit will only work on the 4wd models.

A: Hello Lee. The Pro Comp Suspension Dual Steering Stabilizer Kit, part # EXP222586, will fit your application. Thank you

A: Hello Jeff and thank you for your question! Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit is a complete kit with everything you need to install including instructions.

A: Hello Woodwalker, Thank you for asking. Here is the correct kit for your vehicle http://jo.my/k5qejy it will be the metal finish shocks, the image is incorrect.

A: Hello Don, The Pro Comp Suspension Dual Steering Stabilizer Kit comes with a manufactures limited lifetime warranty.

A: Thanks for the inquiry Nick, the Pro Comp Suspension Dual Steering Stabilizer Kit part # EXP222582 the replacement cylinder is part # EXP223500.

A: Thanks or the question. exp222586 You can download the instructions here http://jo.my/drqsw4 Thank you

A: Hello Kyle, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part# EXP222583Z is designed for the 08-12 style steering. This will work on your truck. Thank you for your inquiry.

A: Hello there, anytime you change tires and wheels you'll want something to help your steering. Its would be a good choice to add that product. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello dc and thank you for your question! Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit takes different brackets then the Bilstein stabilizers do but the Pro Runner shocks and stabilizers are modeled after the Bilstein 5100.

A: Thanks for the inquiry dc, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part # EXP222582Z you will be required to remove to OE stabilizer.

A: Hello Dc, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part# EXP222582Z will definitely help the death wobble issues on the front of your f-350. Thank you for your question.

A: Hello Dc, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part# EXP222582Z will cure the death wobble issue on your truck. Thank you for your inquiry.

A: Hello yes they are inline with the tie-rod and can be rotated up a little also.

A: Thanks for the inquiry Travis, the Pro Comp Suspension Dual Steering Stabilizer Kit part # EXP220561 will fit a 77 Chevy 1500 4x4.

A: Hello You can use the ProComp EXP220561 will work on your straight axle front end.

A: Thanks for the question Steve Pro Comp Suspension Dual Steering Stabilizer Kit, EXP222582 This kit is designed to fit the 2005-13 FORD F250/F350. Thank you BJ Answer Box Sales

A: Hello javy, Pro Comp Suspension Dual Steering Stabilizer Kit EXP222582 is the correct kit for your 2013 F-250.

A: Old N Slow- Thanks for the question. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit should not come in contact with your tie rod. I would recommend loosening the bracket for the center plate and cycling the steering. You might need to push the plate down while tightening the bolts holding the plate to give you the clearance you need.

A: Hello Johnny, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part# exp222583z will not fit your vehicle. We do not carry any dual stabilizer kits for your truck. Thank you for your inquiry.

A: Heavy Duty, Thanks for the question.Sorry I dont have the installation instructions on my site.Please call us monday and we can get Pro Comp to get these instructions.

A: Hello Silantbob. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit will fit with your current set up without modifications. This kit will simply bolt on. Thanks for the inquiry!

A: Hello Brian, the Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part# EXP222582Z comes with actual pro runner stabilizers. Thank you for your inquiry.

A: Raul- Thanks for your question. The Pro Comp Suspension Dual Steering Stabilizer Kit will fit your your 2011 Ford F250 with a 6.7L diesel with 8 inches of lift

A: Hello wattscivic, Thank you for the question. Yes, this will fit your vehicle application.

A: Adrian- Thanks for the question. The Pro Comp Suspension Dual Steering Stabilizer Kit is compatible with an 8 inch lift as long as your 2011 Dodge Ram 3500 is 4x4.

A: Michael- Thanks for the question. The replacement shock is part number EXP217510.

A: Hello Mike, Thank you for the question. This part number will not fit your vehicle application. You will need the Pro Comp Suspension Dual Steering Stabilizer Kit Part Number: EXP222286 or the upgrade to that part number is Pro Comp Pro Runner Dual Steering Stabilizer Kit Part Number: EXP222581Z

A: Hello Connor, Thank you for the question. I would suggest having that tire balanced and rotated. I'd also suggest having the truck aligned. If that does not help them I suggest adding the dual steering stabilizer kit.

A: Chadulls- Thank you for your question. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit will help with pulling and ruts. 40" Tires are a lot for the stock steering and box to control. I would also recommend changing your front spring bushings to poly and check your track bar for play.

A: Greg- Thank you for your question. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit mounting brackets are powder coated, the u bolts are zinc plated, the stabilizers are painted and the main shafts are chromed.

A: Hello Greg, Thank you for the question. The Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit exp222582z mounts above the factory tie rod. The main center bracket mounts to the axle and that mounts the two stabilizer cylinders at the center. The outer brackets & stabilizer cylinders mount to the tie rod itself.

A: Hello Adam, All Pro Comp Pro Runner series shocks and stabilizers are silver in color. Thank you for the email.

A: Hi Mike The main difference is the shocks that come in the kit. the exp222582z comes with the pro runner series shocks that are gas charged and designed fo more aggressive off road driving and performance. The EXP222582 comes with the ES2000 shocks that are a conventional twin tube oil style shock designed for mainly street with the occasional off reading. both kits are good withe the 35" tires. choose the one tat best fits your vehickle usage Thank you

A: Hello Don, That's just Pro Comps way of part numbering a single stabilizer kit and a dual stabilizer kit. Pro Comp does offer both applications for your vehicle. Thank you for the email.

A: DK- Thanks for asking. The Pro Comp Dual Steering stabilizer will work with most all lift kits under 6 inches.

A: Matt thank you for your question. This Pro Comp Suspension Pro Runner Dual Steering Stabilizer Kit part number EXP222582Z will work perfectly for a vehicle with a 6 inch lift and 37 inch tall tires. The difference depends on the shocks and valving.

A: According to Pro Comp the Dual Steering Stabilizer Kit will fit a stock height 2012 Ford F-250.

A: Brandon, The Pro Comp Suspension Dual Steering Stabilizer Kit EXP222582 will fit a non lifted truck.