These NEW Boxed Lower Control Arms increase weld area around the bushing eyelet for improved strength. There are now specific front and rear arms that can be mounted traditionally with the bend down or upside down for improved break-over angles. The front arms are formed to eliminate tire scrub at steering lock.
The bushings are poly. Thank you for the email.
What is the length from eyelet to eyelet? Also are these rebuildable once the bushings go?
Answer this question
The Pro Comp Suspension Boxed Rear Lower Control Arms EXP55400 center bolt hole to center bolt hole length is 16 inches. The bushings and sleeves can be replaced as needed. Thank you for the email.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now