A: If your studs are the metric M14 thread, they should fit.

A: No your vehicle is 8 lug unless it was what they call a heavy half ton

A: Are you talking about stock wheels or do you have aftermarket wheels installed? Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: Yes if they are the same as part #16144B they are acorn style lug nuts

A: Yes, 60 degree conical style.

A: I believe they would work. I bought these for a 2008 GMC HD. As long as you have 14mm threads on your truck, I think you’re ok.

A: Yes M14 x 1.5 is the correct thread size for the 2006 GMC 2500HD.

A: Lug nuts are 14 x 1.5 16145B is correct, but, since the cap covers the lug nuts 16145OE open ends can also work, and really the better fit under the cap

A: Your Fuel Vapor wheels require conical lug nuts. These are spherical so they will not work correctly. Please call our sales line toll free at 1-877-474-4821

A: Will they fit: Yes. Should you buy them: No. While these are self-centering lugs, they do not have adequate thread depth. You'll need to buy the self centering nuts with the extended necks for the necessary thread depth. I did this on my 2014 4runner with similar pro comp wheels. Btw, you made a great wheel selection for your Tacoma!

A: Yes, ET style to center wheels with no vibration issues

A: Yes

A: Hello Becca, These do not have a flat black finish. they have a gloss finish. Thanks for checking us out.

A: Yes they are.

A: 16 Series PXA"16"148B (Use the Pro Comp Lug Nut Spline Key for 16 Series Lug Nuts - Part # PXA2001KEY)

A: Just get any TPMS sensors that are for your make and model and you should be fine w/pro comp 24pc 12×1.5 w/spline key.

A: Yes they come with the High Pressure Pro Comp Valve Stem - PN: PXA11120, the PN: PXA11131 are snap on for (Tire Pressure Monitoring System) TPMS Valve Stems Only

A: Yes the 2015 Tacoma uses the M12 x 1.5 Thread size (Lug Nut)

A: I purchased M14 X 1.50 pitch lu5g nuts and they are holding up fine.the finish is flawless and I have not seen any chips or damage from spline socket but I believe the ford Ranger lug nuts are M12 X 1.5 pitch I would double check owner's manual before ordering

A: The Thread Size: M12 x 1.5 is the correct. The lug nuts on the site are conical seat for aftermarket wheels.

A: The Pro Comp 32-Piece 14x1.5 Lug Nut Kit (Black) - 16145B is a conical (acorn) type lug seat, not recommended.

A: The 2016 Toyota 4 runner thread Size is M12 x 1.5 use: Pro Comp 24-Piece 12x1.5 Lug Nut Kit (Black) - PN: PXA11138B

A: 1. What is the overall length of these nuts? 1.36” 2. What is the maximum width of these nuts? 0.8” 3. Are these 6 spline nuts? Yes

A: Yes the Pro Comp 32-Piece 14x1.5 Lug Nut Kit (Black) - 16145B will work M14 x 1.5 on the 8 lug 1997 Chevy k3500

A: 9/16 - you'll need part number PXA16195B https://www.4wheelparts.com/p/pro-comp-32-piece-9-16-lug-nut-set-black-16195b/_/R-BKBQ-16195B

A: Yes they will

A: Yes they are the correct thread pitch

A: Please call our sales team for more information Toll Free: 1-877-474-4821

A: These will fit perfectly.

A: You will need to call the wheel company to see what lug nuts their wheels need/suggest.

A: Yes these will fit.

A: We need to know what 2021 vehicle you are talking about. Please call our support team for further assistance Toll Free: 1-855-554-2400

A: 2"

A: Yes they will fit

A: 9/16 spline 8 lug kit and 2" long

A: I don't believe these are the right size. When I look up your application, I am showing M14-1.50 Thread 22mm Hex Wheel Nut. Please verify.

A: Yes all Pro Comp lug nuts have a 60 degree conical seat taper.

A: Yes.

A: Unfortunately I'm not sure. We would suggest double checking with Icon to make sure their wheels utilize a 60 degree conical seat taper. That’s most common however we suggest asking Icon just in case. If their wheels utilize a 60 degree conical seat taper than yes our lug nuts will work.

A: What I did is I went on the manufacturer of the rims website and matched them up that way.

A: As long as the Transit is not dual rear wheels they should. M14x1.5 is the correct thread for single rear wheel model.

A: You will need to purchase part number: PXA2001KEY

A: These lug nuts will get the job done for your 2016 Land cruiser Thanks!

A: It depends on what vehicle you are installing these wheels on. We need to know that to verify these will fit. Please call our sales line Toll Free: 1-877-474-4821

A: The over all length of this lug is 1 9/16”, and the ET shank is 1/4”. I bought these and never used them because they were the wrong lugs for my steel rims.

A: Yes they do. They are the correct thread pitch

A: Yes, that style of lug nut will fit.

A: All of our Pro Comp lug nuts are splined lug nuts. These are probably 1.5” or 2” in length.

A: Yes just verify these are the correct thread for your application.