A: Hey Scott, These wheels will fit a 1500 Silverado. Thanks for reaching out!

A: Yes the Pro Comp 89 Series Kore, 16x8 Wheel with 6 on 5.5 Bolt Pattern - Polished - 1089-6883 is the correct bolt pattern for your 2020 Tacoma TRD Off-Road

A: yes comes with center cap lug nuts depend on vehicle.

A: These weigh 27# and center bore is 108mm.

A: Hi Chad, The Pro Comp 89 Series Kore, 17x8 Wheel with 5 on 5.5 Bolt Pattern - Polished - 1089-7885 will fit a 2017 dodge 1500 with 5 on 5.5 bolt pattern

A: Hello tony, Yes, this wheel will fit your vehicle application. Thank you for the question.

A: Thanks for the inquiry Teadherspet, the Pro Comp Alloy Wheels Series 1089, 17x8 with 8 on 6.5 Bolt Pattern - Polished part # PXA1089-7882 if your truck is not a dually these will fit fine, you'll just need new lug nuts.

A: Thanks for the inquiry meldee, the Pro Comp Alloy Wheels Series 1089, 17x9 with 5 on 5 Bolt Pattern - Polished part # PXA1089-7973 is incorrect, you have a 6X5.5 bolt pattern part # PXA1089-7983

A: Thanks for the inquiry Desert Rat, the Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished part # PXA1089-6883 these will fit a 1986 full size Jimmy 6/5.5 bolt pattern.

A: Hello Don302, Yes, the Pro Comp Alloy Wheels Series 1089, 17x8 with 8 on 6.5 Bolt Pattern - Polished will fit your vehicle application. Thank you.

A: Hi Brian the Pro Comp Alloy Wheels Series 1089, 17x8 with 6 on 5.5 Bolt Pattern - Polished do come with center caps. If you have any other questions feel free to ask. Thanks,

A: Hello there, When installed on a vehicle, hub centric wheels are located directly off of the center flange of the brake drum or rotor. This means that the outer beads of the wheels are concentric with the wheel bearings which creates a much better balanced wheel and tire assembly. Aftermarket wheels usually have a standard center bore size to accommodate a wide variety of vehicles. Hub centric rings are rings that cover the spacing between the center bore of an aftermarket wheel to the hub of the vehicle. Hub rings are important because they secure the wheel in place and help prevent any type of vibration issue. The Pro Comp Alloy Wheels Series 1089, 17x8 with 6 on 5.5 Bolt Pattern - Polished will work with your truck.

A: Mark, Yes your 4 runner is 6on5.5 and yes these wheel will fit. Sorry they only make a 16x8 and not a 16x9.

A: Thanks for the inquiry wiseman, the Pro Comp Alloy Wheels Series 1089, 16x8 with 8 on 6.5 Bolt Pattern - Polished part # PXA1089-6882 will fit on your 1991 F250.

A: Hello Yes this wheel does work on the 97 4WD trucks. They have a 4.5 back spacing so they won't be sticking way out.

A: Hello there, we recommend a 17"wheel on your year make & model. The lug nuts are sold separately. Part number needed to finish the job is PXA26145. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry KMK, the Pro Comp Alloy Wheels Series 1089, 17x8 with 6 on 5.5 Bolt Pattern - Polished part # PXA1089-7883 all pro comp aluminum wheels come with center caps.

A: Hello Kmk, the Pro Comp Alloy Wheels Series 1089, 17x8 with 6 on 5.5 Bolt Pattern - Polished part# PXA1089-7883 will fit your new silverado. Depending on your tire choice these wheels wont stick out much at all. with a 285/70/17 tire they would stick out about 1/2". Thank you for your inquiry.

A: Thank you for your question seahunt. Yes this wheel and tire combination will fit your vehicle.

A: Thank you for your question Dupe. I did not see your earlier question so I cannot answer to that question. From what I can see the only issue was on the older Tundras with TRD Brakes that these did not fit. Check with Pro Comp to see if they have any requirements about wheel fitment and the 3 inch lift you have installed. If Pro Comp clears these wheels with that kit they will fit.

A: Hello Carson and thank you for your question! Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished will fit your 4 Runner if it still has a 6x5.5 bolt pattern. You can call 1-800-548-6454 to set up a wholesale account.

A: Thanks for the inquiry Kim, the Pro Comp Alloy Wheels Series 1089, 17x9 with 5 on 5 Bolt Pattern - Polished part # PXA1089-7973 maximum PSI will be listed on the tire you mount on these wheels.

A: Hello Gary, The Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished do have the correct back spacing for your truck. The problem you will experience is the diameter needs to be 17" to work with the larger front brake calipers.

A: Hello there, with a large selection of wheels it rather confusing finding the right one for our rigs. Pro Comp Alloy Wheels Series 1089, part number PXA1089-6883 16x8 with 6 on 5.5 Bolt Pattern - Polished is not the right wheel. The correct part number is PXA1089-6865 16x8 with 5 on 4.5 Bolt Pattern - Polished. The lug nut kit is PXA21184 is what you'll need to finish the job.

A: Hello dhiradj, Thank you for the question. Yes, this wheel will fit your vehicle application.

A: Thank you for your question Cam. Yes the Pro Comp Alloy Wheels Series 1089, 16x8 with 8 on 6.5 Bolt Pattern - Polished will fit your 2005 Chevy 2500HD Diesel

A: Hello Brad, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished Part Number: PXA1089-6883 do come with center caps.

A: Thank you for your question Waynesgto. No the Pro Comp Alloy Wheels Series 1089 does not come in a 5 on 5.5 bolt pattern 10 inches wide

A: Thank you for your question Perry. Yes 8 on 165.1mm is the same as 8 on 6.5 inch

A: Chevy- Thank you for your question. The Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished will fit most chevy c and k pickup trucks.

A: Hello Toyotafan, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 1089, 16x8 with 6 on 5.5 Bolt Pattern - Polished will fit your vehicle application.

A: Thank you for your question. Yes the bolt pattern will fit your truck but the offset and backspace will not.

A: Yes the Pro Comp Series 1089 will fit your Ford Rangers 5x4.5 bolt pattern.

A: These Pro Comp wheels come with center caps but not lug nuts. In order to get you lug nuts I would need more information about your vehicle.

A: Yes the Pro Comp Wheels Series 1089 carry a lifetime structural warranty and a 2 year finish warranty