A: The hub diameter on these is too small at 80mm. The 5G Ranger comes with a 93mm hub diameter.

A: Did your Ranger come stock with 16 or 17" rims? If 17s, this is the right size and bolt pattern to fit. You would just need to verify the offset and backspacing is correct for clearance. Feel free to call our sales team for further assistance Toll Free: 1-877-474-4821

A: It does on mine. However, i have a bit of rub at full lock when backing up and turning running 285's with my 2" icon coil over lift lift and Dirt King control arms. I would siggest a 3" coul over lift and lightracing control arms. The wheels do have a very attractive poke.

A: 17" should from what I hear. Stock is 7.5 wide so, might rub depending on tire size.

A: A wheel’s offset is determined by measuring the distance between the wheel centerline and the mounting surface on the back of the wheel. The offset is measured in millimeters, which can be positive, zero or negative.

A: Thanks for the inquiry Ian, the Pro Comp Alloy Wheels Series 7069, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black Machined part # PXA7069-7983 has a 4.75 inch backspace.

A: They fit perfectly on my 2015 trail 4runner no issues w/ bilstine 5100 lift.  No centering rings required. You will need pro com lugnuts. Do not use off the shelf lugs from auto parts store due to poor thread engagement.

A: Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 weighs 28 lbs.

A: Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 is the correct bolt pattern.

A: Lug Seat: Conical (acorn) w/ the correct thread size for your vehicle.

A: The 2003 Ford Expedition has a bolt pattern of 6 on 135 and you will need a positive offset +18 to + 44. https://www.4wheelparts.com/b/tires-wheels/wheels/6-on-135/_/N-cm5b1Z1z043dy

A: The Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 is the correct bolt pattern for the 2011 Silverado 1500 4WD - 6x139.7mm (6x5.5")

A: I wouldn’t try to put them on 6x5.3 (6x135) Ford bolt pattern as it might create wheel vibration when driving. The offset -6 (negative six). 

A: The offset is not correct for your Bronco. Most of the wheels we've seen for Bronco are +25 or +35

A: The size and bolt pattern is correct for your application. I would verify the offset and backspacing is correct and will clear your calipers.

A: The bolt pattern and size will fit. Please verify if the offset and center bore is what you need.

A: Yes it will fit.

A: Hello joe and joe, These wheels should fit your 2017 4Runner. Thanks for checking us out.

A: Assuming your 2003 Silverado is a 1500 these wheels should fit.

A: That’s not a spec we have. You cannot run hub centric rings with the caps installed.

A: Hello Aloha bro, Yes these should fit, if your prerunner is stock. Thank you for checking us out, we appreciate your business.

A: Yes, the Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 will fit on a 2003 Infiniti QX4.

A: Hello Eddie, Yes, this will fit your vehicle application. Thank you.

A: Hello Jim, Yes, the Pro Comp Alloy Wheels Series 7069, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black Machined PXA7069-7983 will fit your vehicle application. Thank you.

A: Hello Dc, the Pro Comp Alloy Wheels Series 7069, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black Machined part# PXA7069-7983 will clear the calipers on your 2011 tacoma. Thank you for your question.

A: Jr,Thanks for the question,Part # PXA7069-7983 is 17x9, 6 on 5.5(6x139.7) Bolt pattern;Backspace 4.75 and is the correct wheel that will work on your 99 Chevy 1500.

A: LT, Thanks for the Question, PXA7069-7983 weight is 24 pounds with cap.

A: Hello Tim, Thank you for the question. Yes, the center cap is included with this wheel.