A: Yes they will fit 

A: Yes, your truck is 8x6.5 lug pattern. Just make sure that matches the pattern on the wheels you're buying

A: You'll need to either get some new open ended center caps, cut the ends off of the ones they come with, or just run the front with no caps.

A: I installed them on my 1979 f250 4x4 so yes they will work with manual hubs

A: Approximately 5 1/8 inches

A: Center bore is 5.150" or 130.81mm

A: The google machine says 60 degrees.  

A: All Pro Comp wheels have a 60 degree taper meaning you will need to run 60 degree conical seat tapered lug nuts.

A: Fit the truck, yes. Just make sure you get the correct bolt pattern. The tires, no. A 285/75 is too narrow for a 10” wheel. 

A: The bolt pattern is correct, However we do not have tire info for that application.

A: Yes, just make sure you get the correct wheel lug spacing. 

A: This is the correct bolt pattern for your truck. It depends on what tires you are running and your clearance.

A: Use the Pro Comp 69 Series Vintage, 16x10 Wheel with 6 on 5.5 Bolt Pattern - Polished - Part Number: PXA1069-6183

A: The Bolt Pattern is correct 8 on 6.5. Double check that 16" will clear the calipers on the 2014 RAM 3500

A: Yes and will depend on size tire if will clear or not

A: Yes, but they’re short. Will fit a Chevy or Dodge, WILL NOT fit an OBS Ford, not sure about newer models

A: All Pro Comp wheels are lug centric. Meaning the lug nuts are what center the wheel not the hub. All of our wheels use a 60 degree conical seat taper.

A: This is not the right bolt pattern for Tacoma. 1069-6182 is a 8 on 6.5 bolt pattern for 3/4 ton Dodge / Jeep / GM.

A: Polished aluminum

A: 1995 C1500 is a 5x5 bolt pattern and we only have 16x8 available. https://www.4wheelparts.com/p/pro-comp-69-series-vintage-16x8-wheel-with-5-on-5-bolt-pattern-polished-1069-6873/_/R-BKBQ-1069-6873

A: Yes they will, that is the correct bolt pattern.

A: Yes, it’ll clear.

A: Yes, this wheel will fit your vehicle.

A: The bolt pattern is correct so they should

A: You will need EXC139 part number for the extra long caps.

A: Hello Chris, These wheels should fit your Chevy with a dana 60 1 ton. Pretty sure its a 8x6.5 front. As for JUST the center caps, to place on different wheels not sure. Sorry couldn't be more helpful. Thanks for checking us out, we appreciate your business.

A: These are 8-lug wheels. I believe your Ridgeline is a 5-lug bolt pattern. If that is the case, this particular wheel will not fit.

A: Hello Diezel The PXA1069-6182 will fit a 2003 GMC Sierra 1500HD. They will bolt on but they will stick out a lot and would cause the tires to rub when you turn. I recommend PXA1069-6882 which is a 16x8 with an 8x6.5 lug pattern. I recommend a PXA26145 Splined Lug Nut Kit to go with the wheels. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello Wilbert, Your vehicle requires a 17" diameter wheel or larger. This will not fit. Thank you.

A: Jon, These will fit your truck Thanks for the question.

A: Hello Yes they are the correct lug pattern for your Ford and yes we have open front caps for the hub's. You may need to run a 1/4 inch wheel spacer to clear the calipers. Thanks

A: Thanks for the inquiry Jake5150, the Pro Comp Alloy Wheels Series 1069, 16x10 with 8 on 6.5 Bolt Pattern - Polished part # PXA1069-6182 lugs are sold separately.

A: 1ton'o'fun from alberta,Thanks for the question.Part #PXA 1069-6182 will work with 15 inch wide tire.This wheel has the correct load rating for a 3/4 or 1 ton Truck.

A: James,Thanks for the question.Part # PXA1069-6182 only comes in a -24mm offset.This wheel has a large enough center bore to fit over a dana 60.

A: Hello James, The Pro Comp Alloy Wheels Series 1069, 16x10 with 8 on 6.5 Bolt Pattern - Polished only come in one backspacing option.

A: Thanks for the inquiry john, the Pro Comp Alloy Wheels Series 1069, 16x10 with 8 on 6.5 Bolt Pattern - Polished part # PXA1069-6182 we have no stock for about 60 days, they do not come in black in that size, also going with a 10" wide the tire will sit out about 2 inches, go with a 8" wide to tuck under part # PXA1069-6882 that we have in stock.

A: Hello John, Thank you for asking. The Pro Comp Alloy Wheels Series 1069, 16x10 with 8 on 6.5 Bolt Pattern - Polished weigh 21lbs a piece.

A: Thank you for your question Jimmy. Yes these wheel should fit your vehicle but you may have some issue with your caliper slide bolt with this backspace, you may have to switch to an allen head bolt. The images shown are of this actual wheel.

A: Hello Molx, The Pro Comp Alloy Wheels Series 1069, 16x10 with 8 on 6.5 Bolt Pattern - Polished will fit on your 99 Chevy K2500 8-6.5.

A: Thank you for your question Joe. Yes the Pro Comp Alloy 1069 Wheel does come with the center cap.