Pro Comp 69 Series Vintage Polished Alloy Wheels

A: No the center caps are closed but you can mount the rim without the center cap for your locking and unlocking of hubs 

A: The center caps on mine it looks like you can pop the cap off and they would then be open center caps. You can also not use the center caps at all if desired.

A: Please contact Pro Comp customer service at 800-776-0767

A: When I bought these specific wheels they came polish chromed. They are amazing, haven’t had an issues yet, and I’ve had em for over a year. They are high maintenance as you have to keep them clean and polished. 

A: Polished aluminum. They are pretty easy to keep clean. Make sure to get a brake dust trap lol. 

A: No, Ford had 8x170 wheel lug spacing. I bought these for my 97 ram 2500 and dodge used 8x 6.5 /165.1. I believe the 90s Chevy and dodge used the same spacing but Ford was different. You need 8x170 spacing wheels. For that 95 Ford. And the caps are not open for manual locking hubs so you will have to leave the front caps off so you have access to lock the hubs.

A: Yes, they will fit your Ford, and the center caps, will also work, as the have a removable end cap, which comes off , and exposes your lockout

A: should, I'm currently running 235/75/15 Goodyear Wranglers for about a year now and absolutely zero issues.

A: Yes the Pro Comp 69 Series Vintage, 15x8 Wheel with 5 on 4.5 Bolt Pattern - Polished - # PXA1069-5865 will fit the 225/75R15 tire.

A: Part Number: TWG71-6783 (16x7 | 6 on 5.5 Bolt Pattern)

A: 16x8 is the narrowest offered.

A: Negative 19

A: The offset is negative -19

A: I believe most Ford Rangers have a 5 on 4-1/2” lug pattern. These are 5 on 5-1/2” 

A: Wrong bolt pattern, needs part# PXA1069-5865

A: Yes, but they will probably have to be 16 inches or 17 inches. Plus backspacing will something to check out

A: 16” Minimum on that truck cannot run 15’s https://www.4wheelparts.com/p/pro-comp-69-series-vintage-16x10-wheel-with-5-on-5-5-bolt-pattern-polished-1069-6185/_/R-BKBQ-1069-6185

A: Yes, I have these on my stock height 78 f150 4x4.

A: I put them on my CJ5 but they should fit any 5 -5.5  Great wheels 

A: Make sure of the lug measurement 165.1mm or 170mm

A: The Pro Comp 69 Series Vintage, 18x9 Wheel with 8 on 6.5 Bolt Pattern - Polished - 1069-8982 will fit the 2007 Chevy Express 3500 passenger van with a 8 on 6.5" bolt pattern

A: I would think so. Mine fit over the internal spline hub of a 1/2 ton Dana 44 with the same 6 lug bolt pattern as Toyota

A: Yes. I have them on a 88 Blazer with manual hubs and the fit fine.

A: Yes

A: These will fit your 1980 f150 4x4.

A: Yes they’ll work with tire pressure sensors .Genuine packages lug nuts work great on mine, just don’t lose the key.

A: Factory TPMS will work. You will need a narrow spline type lug nuts.

A: Ford F 150 is 6X135 Ram 2500 is 8x165 so no that size won’t fit but check and see if they have your size . Speak to a 4wheel parts associate.

A: Please verify your bolt pattern. Without knowing your submodel, I am showing your truck has 6 lugs? If that is correct, this wheel would not fit. Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: I’m not sure about your application if the truck isn’t lifted.  My truck is a 1993 Chevy K3500 with a 6” lift. I’m running pro comp tires 35”x12.5 on 8 lug pro comp rims 17”x9. 

A: Yes, it’ll clear

A: Use the Pro Comp 69 Series Vintage, 18x9 Wheel with 8 on 6.5 Bolt Pattern - Polished - PN: PXA1069-8982

A: The bolt pattern for the 2005 Ram 1500 is correct: 5 on 5.5 and would run the 17" wheels. Pro Comp 69 Series Vintage, 17x9 Wheel with 5 on 5.5 Bolt Pattern - Polished - Part Number: PXA1069-7985. If the truck has stock suspension - Use the tire size 265/70R17 or give us a call: Sales & Support - 877-474-4821

A: The Pro Comp 69 Series Vintage Wheel, 17x9 with 8 on 6.5 Bolt Pattern - Polished - PN: PXA1069-7982 is the correct bolt pattern. Lug Size: 9/16" Tire Size: 265/70R17 (Stock '07 Ram 2500)

A: COO: ASIN

A: Use Part Number: PXA1069-6883 (Pro Comp 69 Series Vintage, 16x8 Wheel with 6 on 5.5 Bolt Pattern)

A: The Pro Comp 69 Series Vintage Wheel, 17x9 with 8 on 6.5 Bolt Pattern - Polished - PN: PXA1069-7982 will fit the 95 F-250 w/ a 8x6.5 bolt pattern and the center caps are two piece to accommodate the front hubs.

A: I bought these for my 1970 Bronco & the fit was close on the Dana 30 hub. I believe they’re 72 or 74mm. 

A: The Bolt Pattern is correct 8 on 6.5. Double check that 16" will clear the calipers on the 2014 RAM 3500

A: Get the lug patter

A: The Pro Comp 69 Series Vintage Wheel, 17x9 with 8 on 6.5 Bolt Pattern - Polished - PXA1069-7982 is the correct bolt pattern for the 1964 Chevy C20 with eight lugs.

A: Correct, the image used is a stock photo. The wheel has a -46 offset so it will sit back.

A: Pro Comp Center Cap (Chrome) - PN: PXA7515042 (Center Bore: 5.15)

A: They fit perfectly. 

A: Yes and will depend on size tire if will clear or not

A: '96 Silverado 2WD uses a 5x127 (5x5) bolt pattern.

A: Yes, but they’re short. Will fit a Chevy or Dodge, WILL NOT fit an OBS Ford, not sure about newer models

A: Thread size (Lug Nut Size): M14 x 1.5 (Pro Comp 32-Piece 14x1.5 Lug Nut Kit (Chrome) - PXA16145)

A: Pro Comp Wheel Hub Spacer - PN: PXAHR1081

A: If the Chevy center cap is - Center Bore: 5.15 | Push Thru

A: The Pro Comp 69 Series Vintage Wheel, 16x8 with 8 on 6.5 Bolt Pattern - Polished - 1069-6882 has the same bolt pattern (8x165.1 (8x6.5)) as the 1967 Ford F-250.

A: The 2009 Chevy Express van 2500 uses the 8 on 6.5 bolt pattern, and use lug nut thread size: M14 x 1.5

A: The bolt pattern on the 1985 F-150 is correct 5x139.7 (5x5.5) and the Thread Size (Lug Nuts) 1/2" - 20.

A: The Pro Comp 69 Series Vintage Wheel, only is available in 17x9 with 8 on 6.5 Bolt Pattern

A: The '97 Crown Victoria has a 5 on 4.5 bolt pattern and would likely have a 15 inches in height x 6.5 wide wheel. Yokohama 215/70R15 Tire, GEOLANDAR A/T G015 - # 110101581