Pro Comp 4 Inch Stage II Lift Kit with ES3000 Shocks - K3083B

Specifications

  • Pro Comp Suspension | Part Number: EXPK3083B
  • Suspension Type:Coil Spring & Short Arm
  • Rear Lift Method:Coil Springs
  • Lift kit:4 Inches stage 2
  • Rear Lift Component:Coil spring
  • Lift Height Range:3 to 4.99 Inches
  • Shocks Included:Shocks Included
  • Front Shocks:ES3000
  • Fitment:Direct Fit

PRODUCT OVERVIEW

Pro Comp is driven by genuine off road enthusiasts. Pro Comp Suspension Products reflect customer-driven, racing influenced technology and engineering with a focus on world-class manufacturing processes and techniques. When it comes to your vehicles handling, look and performance, we know you don't make compromises and either do we. From the middle of downtown to the middle of nowhere Pro Comp will get you there and back.

Reviews

4.3
5.0
great lift kit

great lift kit for the jeep. had it installed by 4 wheel parts of fresno ca. it improved the ride on and off road.


from madera ca |
5.0
Fantastic lift that outperforms my expectations

I bought this kit to clear 33 inch bfg km2's. The lift flexes smoothly and without any resistance. My Jeep now rides better and no longer gets death wobble on the freeway.


from Central Point, OR |
3.0
pro comp needs to review instructions

I'm an experienced mechanic and the installation instructions are not good.part labeling and images horrible.not for do it yourselfers.but after all that and some choice words.looks good rides nice.


from shingle springs,ca |
5.0
Pro Comp Lift

I have had the Stage II kit in the Jeep for a couple of years, and I have taken it on a few offroad trips, including high rating trails. Only recently did I take the Jeep in to get the alignment checked. After checking everything out, the 4 Wheel parts mechanic said everything was perfect and no adjustments were needed. The shocks show no signs of wear, despite being stretched and stressed repeatedly. Given a two year run, with about 20K miles on the road, and more than average offroad exposure, I would consider this a pretty durable system. Visit my blog for More: www.procliftreview.blogspot.com


from TX |
4.0
Great basic lift kit

Had this kit installed at 4 Wheel Parts with a detachable antisway bar. Kit was recommended by the manager. This is a great combo. With the sway bar attached, the Jeep handles great on the street. Pop the pins and detach the sway bar, and the wheel travel is excellent. Tackled a short Category 5 trail in Death Valley with no problem whatsoever. Overall a nice compromize between price and performance.


from Las Vegas, NV |
4.0
Decent Lift

The instructions were definitely not written for non-mechanics. I had a mechanic friend help me install the lift. Once installed, I was definitely pleased with the results. Definitely worth the money. There was some modifications made to the frame to add a bracket to the front. It required drilling a couple of large holes in the frame. There is no way this could have been installed in my driveway, especially with a decent selection of tools I have. It required tools / bits that most normal shade tree mechanics would not have.


from Atlanta, GA |

Question & Answers

8 Answered questions

hey is this kit able to be upgrade to long arm down the road as im going to want want to later on thanks again

Asked by mark from middleton nova scotia on

Hello mark, Yes, the Pro Comp Suspension 4 Inch Stage II Lift Kit with ES3000 Shocks can be upgraded to a long arm at a later date. Thank you.

Answered by from middleton nova scotia on

Does this kit cause driveline vibrations at all? or all good there?

Asked by J-Man from Chicago, IL on

Hello On some Jeeps we do get a little vibrations but very rarely. There is a cam kit for the rear axle that will align the rear drive shaft angle. It is part number EXP 20-65225 Thanks

Answered by Rody from Chicago, IL on

what does pro com[ call the pin that their sway bar quick disconnect slide onto. what is it's part number. where can I buy 2 of them and for how much.

Asked by gary from poway on

Hello Gary, Please contact Pro Comp at 800-776-0767, they should be able to provide you a part number.

Answered by Robert from poway on

See all questions & answers

Manufacturer

Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now

Promotions