Pro Comp 4 Inch Rear Lift Blocks

A: 95-400 is a tapered block with degree added for driveline angle correction. The center where the block sits on the leaf spring pad is 4".

A: 6” long

A: Yeas rear suspension is leaf spring so blocks will work.

A: No they will not fit.

A: Hello again Chris, Yes these will work (part number EXP95-401). These are sold individually. If you need new U-Bolts and hardware please contact us 877-474-4821 and provide these part numbers(EXP13-90086 individual U-Bolt, hardware 20-65302). Thanks again for checking us out.

A: Hello Chris, The 4 inch blocks for a 2019 Chevy 1500 new body, are part number EXP95-401. These are sold individually. If you need new U-Bolts and hardware please contact us 877-474-4821 and provide these part numbers(EXP13-90086 individual U-Bolt, hardware 20-65302). Thanks for checking us out.

A: Yes these will work for you truck.

A: The Pro Comp 4" Rear Lift Block - 95-401 will fit 1999-2013 Chevrolet Silverado 1500.

A: U-bolts are sold separately

A: Yes, this part is universal application.

A: Hi Thomas, These Pro Comp 4 Inch Rear Lift Block has a 2.5 inch width and a 9/16 inch pin hole. We will get the listing updated. Hope this helps.

A: Hi Kevin The EXP95-400SDB is a pair of flat blocks with the ear coming out the side to hit the bump stop for the correct compression travel travel of the rear suspension. I realize the description says tapered buy the are not tapered. Both blocks in the kit are identical. There is not a left or right you just install them so that the ear is on the correct side to match up with the bump stop location. I hope this was helpful Thank You Jon Snyder 4Wheelparts

A: Hello Boz, the Pro Comp Suspension 4 Inch Rear Lift Block part# EXP95-400SDB is tapered to help with your driveline angle. Thank you for your question.

A: Thanks for the inquiry Boot, the Pro Comp Suspension 4 Inch Rear Lift Block part # EXP95-400SDB without going with a complete suspension system you can do a leveling kit part # EXP63200 + EXP63202.

A: Hello Midstaterick, the Pro Comp Suspension 4 Inch Rear Lift Block would be the better way to go. If you ever plan to tow or carry heavy loads with your truck the aftermarket leafs are not made to carry the weight that your factory springs are. I would recommend the Block kit. Thank you for your question.

A: Hello Doug, The Pro Comp Suspension 4 Inch Rear Lift Block is set with the dual pins to work on your truck.

A: Hello Wes, These Pro Comp Suspension 4 Inch Rear Lift Block are not for your truck. Pro Comp only offers block kit for the 4 Wheel Drive trucks. The blocks you are looking at are just blocks only, no u bolts but they do not offer anything for a 2 Wheel Drive.

A: Tony, Thank you for asking. Pro Comp Suspension 4 Inch Rear Lift Block will not fit your vehicle. Here are the correct ones for a 1999 http://jo.my/7trj85

A: Hi Alex The Pro Comp Suspension 4 Inch Rear Lift Block, exp95-401 will not fit your vehicle. We have this part EXP95-352 which is 3.5 inch lift block. Thanks

A: Hello Alex, The Pro Comp Suspension 4 Inch Rear Lift Block will not fit your 05 chevy half ton. The Lift block that will fit can be found here http://jo.my/ht2cle

A: sas- Thank you for your question. The Pro Comp Suspension 4 Inch Rear Lift Block will not fit your 09 chevy half ton. The Lift block that will fit can be found here http://jo.my/ht2cle

A: Hello Superduty, Thank you for the question. The Pro Comp Suspension 4 Inch Rear Lift Block Part Number: exp95-401 are sold single.

A: Sped- Thank you for your question. The Pro Comp Suspension 4 Inch Rear Lift Block will not fit your 91 nissan pathfinder. The listed spring width for the leaf spring Pathfinders is 2.36 inches. The Block width is 2.75 inches. I would recommend an add -a - leaf instead. Not quite as much lift but much better results. You can find that kit here http://jo.my/34pxd0

A: Jay- Thank you for your question. The Pro Comp Suspension 4 Inch Rear Lift Block are tapered to improve drive shaft angle.

A: Hi Mud Country The blocks are sold in pairs so the cost is $15.99 for the pair of blocks. you will need to check you spring width should be 2.5" with a 9/16" hole in the axle housing. the dodge 1500 2500 3500 have different requirements. Thank You

A: Hi Drew These are universal lift blocks designed to fit any truck with a 2 3/4 wide leaf spring. double check that your truck is equipped with 2 3/4 wide rear springs. don't forget to measure your U-Bolts and order some that are 4-5 inches longer. Thank you

A: Hello DJ 1 TEN, The Pro Comp Suspension 4 Inch Rear Lift Block EXP95-405F are sold individually. Thank you for the email.

A: Hello Matt, We do not recommend running any lift blocks on the front of a leaf sprung vehicle. We only recommend full lift leaf packs. Here is a direct link to our complete leaf spring selection http://jo.my/tnxbvm Thank you for the email.