A: Decorative only, non removable as far as I can tell.

A: They are not able to be removed. 

A: I measured 3 1/8 center hole

A: 83.06mm hub bore diameter

A: The Thread Size: 1/2" - 20 UNF https://www.4wheelparts.com/b/tires-wheels/wheel-lug-nut/1-2x20/_/N-cm5b7Z1z01tln

A: Bolt pattern wise it’ll go onto the vehicle. 205/70/15 tires on that wheel, will looked stretched and we do not recommend it. We would recommend a 15x6 or 15x7 max on that tire, which we do not offer in this wheel.

A: The 1988 Suzuki Samurai Base Model bolt pattern is 5-139.7 mm. This means there are 5 lugs and the diameter of the circle that the lugs make up measures 139.7 mm or 5.5 inches across. Use PN 7031-2985 (Bolt Pattern: 5 on 5.5)

A: This specific part number (7031-5865) has a 3.27” center bore. These wheels are lug centric and will be centered as soon as the lug nuts are torqued down.

A: This is the incorrect bolt pattern for your 2019 Ram 1500 you need 5x5.5 heres a link to the same wheel but in a 17in https://www.4wheelparts.com/p/pro-comp-31-series-stryker-17x9-wheel-with-5-on-5-5-bolt-pattern-matte-black-7031-7985/_/R-BKBQ-7031-7985

A: You need bolt pattern 5 on 4.75 for your S10. Tire size will depend on if you have an aftermarket lift on it or if you are putting this on your stock truck.

A: Yes

A: Hello Dick, Sorry, this wheel will not fit your vehicle applications for two reasons. 1> Your vehicle will not accept a 15" diameter wheel. You will need to run a 17" or larger diameter. 2> Your vehicles lug pattern is 5 on 5. Thank you for the question.

A: Thanks for the inquiry mike, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 -19 mease it's more deep dish and has a wider footprint on the ground, PSI just stay about 80% of the max air pressure listed on the sidewall.

A: Hello Mike, The factory wheel studs will fit this wheel. Thank you.

A: Hello Jason, This wheel will not fit your vehicle application. Your vehicle has a 5 on 5 lug pattern and requires a 16" or larger diameter wheel. Thank you.

A: Hello Conor and thank you for your question! Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black is the correct bolt pattern for your Nitro, but you would want to measure your brakes to make sure a 15" aftermarket wheel will fit.

A: Thanks for the inquiry mike, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 ths backspace is from where the bolts go through the back of the wheel to the inside lip. No spacers needed, it's how far in or how far out the wheel sits on the vehicle.

A: Hello Rodney, The silver bolt heads are aluminum. Thank you.

A: Hello eschmidt71, Yes, a 33x12.50 tire will fit the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865. Thank you.

A: The Pro Comp Alloy 7031 5x4.5 is the correct bolt pattern for the Ford Ranger

A: Hello Bert, your 2002 Gmc 1500 2wd needs atleast a 16" wheel in a 6/5.5 bolt pattern to clear your factory brake calipers. Thank you for your inquiry.

A: Hello Raul, These Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black are correct for your application and bolt pattern.

A: Hello JC, Thank you for asking. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will fit your vehicle and the 33x12.50x15 tires.

A: Thank you for your question Hunter. Yes the Pro Comp Series 7031 Wheel will fit your 1992 Toyota Pick up

A: Tim, Thank you for asking. From 1999-2004 the Nissan Xterra is a 6x5.5 bolt pattern.You will need to run a wheel that is 17" or larger with a 6x5.5 bolt pattern.

A: Thank you for the question Catelyn. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 will fit your application.

A: Marty, The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will fit your Jeep. To clear 31" tall tires you will need at least 2" of lift and to clear 33" tires you will need 4" of lift.

A: Hello there, it gets a little tricky picking the right wheels for our rigs at time. In your case the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part number PXA7031-5865 will fit on your 2002 Jeep Wrangler X. You'll need a set of lug nuts to finish the job, part number PXA21184B will be all you need.

A: Hello Jeffery, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part# PXA7031-5865 will not fit your vehicle. You need a wheel with a 5/5.5 bolt pattern. Thank you for your inquiry.

A: Thank you for your question rj. No this wheel will not fit your C-10 truck. The bolt pattern is 5 on 5 standard or 5 on 127 metric

A: Tim banks from Nc.. Thanks for the question.Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will not fit on your 2003 NIssan Xterra.You must run 17 inch or bigger.Example of part # would be PXA7031-7983

A: Thank you for your question azSdime. No the rims will not fit your S10 as the bolt pattern is wrong. You will need a 5 on 4.75 bolt pattern for your vehicle.

A: Cody- Thanks for the question. The bolt patter you should have for your 95 dodge cummins 2500 should be a 8 x 6.5, that would be the part number PXA7031-8982

A: Hi Ronnie, Thank you for the question. This wheel will not fit your vehicle application. Your lug pattern is 5 on 4.75

A: Hi Trey, Thank you for the question. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black are sold single.

A: Hello Patrick, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black Part Number: PXA7031-5865 will fit your vehicle application.

A: Hello Bubba, Thank you for the question. They are a simulated bead lock wheel.

A: Hello Nate, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black Part Number: pxa7031-5865 will fit your vehicle application.

A: Hello koothis, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865 will fit your vehicle application.

A: Hello Stephen, Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865 will fit your vehicle application. Thank you for the email.

A: Thank you for your question. Yes the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part number PXA7031-5865 will fit your 1998 jeep xj sport and the center caps are included.

A: Hi riseofreese The PXA7031-8885 is the incorrect wheel bolt pattern for your 2013 Ford F-150 your truck should be the 6 on 135mm bolt pattern will require a 17" rim minimum to clear the breaks. http://jo.my/4ona0v Thank you