Pro Comp 31 Series Stryker Matte Black Alloy Wheels

A: Decorative only, non removable as far as I can tell.

A: They are not able to be removed. 

A: Yes

A: Yes they do...awesome set of rims too :D

A: I measured 3 1/8 center hole

A: 83.06mm hub bore diameter

A: This is the incorrect bolt pattern for your 2019 Ram 1500 you need 5x5.5 heres a link to the same wheel but in a 17in https://www.4wheelparts.com/p/pro-comp-31-series-stryker-17x9-wheel-with-5-on-5-5-bolt-pattern-matte-black-7031-7985/_/R-BKBQ-7031-7985

A: Yes they do

A: 83.06mm

A: No these are not real bead lock just the look

A: You need bolt pattern 5 on 4.75 for your S10. Tire size will depend on if you have an aftermarket lift on it or if you are putting this on your stock truck.

A: Yes

A: Hello again Patrick, These should fit your 2002 Pathfinder if no major changes have been completed to the vehicle. Thanks for checking us out, we appreciate your business.

A: Hello Dick, Sorry, this wheel will not fit your vehicle applications for two reasons. 1> Your vehicle will not accept a 15" diameter wheel. You will need to run a 17" or larger diameter. 2> Your vehicles lug pattern is 5 on 5. Thank you for the question.

A: Thanks for the inquiry BQ, the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5 Bolt Pattern - Flat Black part # PXA7031-7973 is incorrect, you have a 5/4.5 bolt pattern. This wheel is unavailable in this size and bolt pattern, in order to clear a 35 inch tire we recommend a 4-6 inch lift.

A: Hello Tom and thank you for your question! Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 4.5 Bolt Pattern - Flat Black will not fit on your 2016 Jeep Wrangler. You would need to use PXA7031-6873 with a bolt pattern of 5x5.

A: Thanks for the inquiry mike, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 -19 mease it's more deep dish and has a wider footprint on the ground, PSI just stay about 80% of the max air pressure listed on the sidewall.

A: Hello Mike, The factory wheel studs will fit this wheel. Thank you.

A: Hello Mark, This wheel has a 108mm center bore. Thank you for the question

A: Hello Jason, This wheel will not fit your vehicle application. Your vehicle has a 5 on 5 lug pattern and requires a 16" or larger diameter wheel. Thank you.

A: Hello G, Yes, this wheel will clear the caliper on your vehicle. Thank you for the question.

A: Hello Chaunce, Yes, this wheel will fit your vehicle application. Thank you for the question.

A: Hello 4yota and thank you for your question! Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black would have to test fitted on you Tacoma to make sure the aftermarket 16" wheel clears your brake calipers. Rule of thumb on aftermarket wheels for the newer Tacoma's would be to run 17" wheels.

A: Hello Josh and thank you for your question! Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black will take spline lug nuts 12x1.5 for your Tacoma, use PXA21134 for the kit.

A: Hello Brian and thank you for your question! Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black will work for your 2000 Sierra 1500 and you can run a 33" tall tire with a level kit.

A: Hello Conor and thank you for your question! Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black is the correct bolt pattern for your Nitro, but you would want to measure your brakes to make sure a 15" aftermarket wheel will fit.

A: Hello Bryan, Yes, this wheel will fit a 35x12.50R17 tire. Thank you for the question.

A: Hello tdeblaze, Not sure what vehicle you will be installing this on, but this wheel will fit that tire size. Thank you for the question.

A: Thanks for the inquiry Jessica, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7031-6883 these might fit because they have a 0 offset, not sure, we do recommend a 17 inch or taller wheel due to brake caliper clearance.

A: Thanks for the inquiry Jose, the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 5 Bolt Pattern - Flat Black part # PXA7031-6873 will not fit, you have a 5/135MM bolt pattern and this wheel is not available for your application.

A: Thanks for the inquiry mike, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 ths backspace is from where the bolts go through the back of the wheel to the inside lip. No spacers needed, it's how far in or how far out the wheel sits on the vehicle.

A: Hello Alex, The shipping weight is 31 pounds each. Thank you.

A: Hello pony43, Yes, this wheel will fit your vehicle application. Thank you for the question.

A: Hello keith12, No, your 2015 Toyota Tacoma requires a 17" or larger diameter wheel. Thank you.

A: Hello AlexJeeper, Your vehicle requires a 17" or larger diameter wheel for clear the factory brake calipers. Thank you.

A: Hello Shane, Yes, this wheel will fit your vehicle application. You will need to delete the center cap on the front wheels for clearance of the lucking hubs. Thank you.

A: Thanks for the inquiry CRod, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7031-6883 these will work just fine as long as your truck is a 6 lug.

A: Hello Rodney, The silver bolt heads are aluminum. Thank you.

A: Hello eschmidt71, Yes, a 33x12.50 tire will fit the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865. Thank you.

A: Hello Johnny, Yes, the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-6865 will fit your vehicle application. Thank you.

A: The Pro Comp Alloy 7031 5x4.5 is the correct bolt pattern for the Ford Ranger

A: Hello david, Yes, a 255/75R17 tire can fit on the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5 Bolt Pattern - Flat Black. Thank you.

A: Matt, That is the correct bolt pattern for the 00 Ranger. Thanks for the question.

A: Matt, This is the correct bolt pattern for your Ranger. Thanks for the Question.

A: Hello Matt, Yes, the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 4.5 Bolt Pattern - Flat Black will fit your vehicle application. Thank you.

A: Thanks for the inquiry cindycrosby, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7031-6883 these are compatible with TPMS sensors.

A: Thanks for the inquiry B-Hole, the Pro Comp Alloy Wheels Series 7031, 18x9 with 6 on 135 Bolt Pattern - Flat Black part # PXA7031-8936 all our alloy wheels the center caps are included.

A: Hello Soupcan, Thank you for asking. On a 2007 Tundra you will need at least a 17" wheel to clear the brakes. You have a 5x150 bolt pattern.

A: Thanks for the inquiry John Wayne, the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 5 Bolt Pattern - Flat Black part # PXA7031-6873 this wheel has a 2200 lb capacity, 5/5 will be the same.

A: Hello Bert, your 2002 Gmc 1500 2wd needs atleast a 16" wheel in a 6/5.5 bolt pattern to clear your factory brake calipers. Thank you for your inquiry.

A: Hello Raul, These Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black are correct for your application and bolt pattern.

A: Hello JC, Thank you for asking. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will fit your vehicle and the 33x12.50x15 tires.

A: Hello Tanner, the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5.5 Bolt Pattern - Flat Black part# PXA7031-7985 will be a perfect fit with the tires you have selected. We can also mount and balance your package for an additional 49.95$. Thank you for your questions.

A: Hello Abba, Yes, the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5.5 Bolt Pattern - Flat Black PXA7031-7985 will fit your vehicle application.

A: Thanks for the inquiry Mark, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7031-6883 will work just fine with your vehicle, there is negative effect on the truck being a 1500. We normally will use a 6 inch lift for 35's on that year.

A: Yes the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5.5 Bolt Pattern - Flat Black will clear the calipers on a 1998 Dodge ram 1500. Hope this helps!

A: Hello dboogz and thank you for the inquiry on the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 5 Bolt Pattern - Flat Black. The wheels come with the center cap. The lug nut would have to be ordered separately and are available per application. To avoid confusion, you can always call me at 877-474-4821 ext 5136 and I will happy to help you with the order. Thanks, Alan

A: Hello Acorb17, the Pro Comp Alloy Wheels Series 7031, 18x9 with 5 on 5 Bolt Pattern - Flat Black part# PXA7031-8973 will fit your 2011 jeep wrangler. Thank you for your inquiry.

A: Hello Terry. The Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5 Bolt Pattern - Flat Black, part # PXA7031-7973, will sit out about 2" from where the stock wheels sit on the JK. Thank you

A: Thank you for your question Hunter. Yes the Pro Comp Series 7031 Wheel will fit your 1992 Toyota Pick up

A: Hello there, this Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black wheel part number PXA7031-6883 will accept any size tire the question should how much of a lift you have. With a stock lift 265/75-16, with a leveling kit a 285/75-16, with a 6"inch lift a 35x12.50-16. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Tim, Thank you for asking. From 1999-2004 the Nissan Xterra is a 6x5.5 bolt pattern.You will need to run a wheel that is 17" or larger with a 6x5.5 bolt pattern.

A: Thank you for the question Catelyn. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part # PXA7031-5865 will fit your application.

A: Marty, The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will fit your Jeep. To clear 31" tall tires you will need at least 2" of lift and to clear 33" tires you will need 4" of lift.

A: Hello there, it gets a little tricky picking the right wheels for our rigs at time. In your case the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part number PXA7031-5865 will fit on your 2002 Jeep Wrangler X. You'll need a set of lug nuts to finish the job, part number PXA21184B will be all you need.

A: Hello Jp. the Pro Comp Alloy Wheels Series 7031, 16x8 with 5 on 5 Bolt Pattern - Flat Black is somewhat a matte black finish. They do not offer the bolts in black, you would need to paint them. Thank you for your inquiry.

A: Hello Jeffery, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part# PXA7031-5865 will not fit your vehicle. You need a wheel with a 5/5.5 bolt pattern. Thank you for your inquiry.

A: Thank you for your question rj. No this wheel will not fit your C-10 truck. The bolt pattern is 5 on 5 standard or 5 on 127 metric

A: Tim banks from Nc.. Thanks for the question.Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black will not fit on your 2003 NIssan Xterra.You must run 17 inch or bigger.Example of part # would be PXA7031-7983

A: Thank you for your question rogers. No the Pro Comp Wheels do not come with lug nuts.

A: Thank you for your question azSdime. No the rims will not fit your S10 as the bolt pattern is wrong. You will need a 5 on 4.75 bolt pattern for your vehicle.

A: B- Thanks for the question. The Pro Comp Alloy Wheels Series 7031, 17x9 with 8 on 6.5 Bolt Pattern - Flat Black will need the spline drive lug nuts

A: Cody- Thanks for the question. The bolt patter you should have for your 95 dodge cummins 2500 should be a 8 x 6.5, that would be the part number PXA7031-8982

A: Hi Ronnie, Thank you for the question. This wheel will not fit your vehicle application. Your lug pattern is 5 on 4.75

A: Hi Trey, Thank you for the question. The Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black are sold single.

A: Hello Cuse, Thank you for the question. Yes, this wheel will for your vehicle application.

A: Thank you for your question Dan. Yes the Pro Comp Alloy Series 7031, 16x8 with 6 on 5.5 bolt pattern in Flat Black part number PXA7031-6883 will fit your 2007 Hummer H3.

A: Hello Patrick, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black Part Number: PXA7031-5865 will fit your vehicle application.

A: Hello Bubba, Thank you for the question. They are a simulated bead lock wheel.

A: Hello Tim, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black Part Number: PXA7031-6883 will fit your vehicle application.

A: Hello Nate, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black Part Number: pxa7031-5865 will fit your vehicle application.

A: Hello koothis, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865 will fit your vehicle application.

A: Hello BR, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black PXA7031-6883 will fit your vehicle application

A: Thank you for your question. When it comes to the torque setting it is best to refer to the stock specifications.

A: Thank you for your question. I will need to know what type of vehicle that these will go on to give you the correct information

A: Thank you for your question. No the bolt pattern on your Tundra is a 5 on 150

A: Hello Stephen, Yes, the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black PXA7031-5865 will fit your vehicle application. Thank you for the email.

A: Thank you for your question. Yes the Pro Comp Alloy Wheels Series 7031, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black part number PXA7031-5865 will fit your 1998 jeep xj sport and the center caps are included.

A: Hello Chris, No Rock Rings come with the Pro Comp Alloy Wheels Series 7031, 17x9 with 5 on 5 Bolt Pattern - Flat Black PXA7031-7973. Pro Comp does not offer them. Thank you for the email

A: Hi riseofreese The PXA7031-8885 is the incorrect wheel bolt pattern for your 2013 Ford F-150 your truck should be the 6 on 135mm bolt pattern will require a 17" rim minimum to clear the breaks. http://jo.my/4ona0v Thank you

A: Thank you for your question. The your Hummer H3 has a different bolt pattern and the wheel you asked about will not fit. Here is a link to the correct wheel that will fit it is a Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part number PXA7031-6883 http://jo.my/rmhius You can use the same tires on these wheels but your side wall will flatten out and have less give so you will get a slight ruff ride.

A: Thank you for your question. The Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part number PXA7031-6883 will fit your 2000 Toyota Tacoma. From what I can see the tire will fit as well, just check with the lift manufacture to see what is the max size tire they recommend to fit your application.

A: Ray- Thanks for the inquiry. This Pro Comp Series 7031 wheel in 16x8 with a 4.5 back spacing will fit your 2004 Nissan Xterra.

A: Big AJ the Pro Comp Alloy Wheels Series 7031, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part number PXA7031-6883 do not come with lug nuts. Here is a link to the lug nut page on 4 Wheel Parts http://jo.my/lugnut

A: Yes the Pro Comp Wheel Series 7031 part number PXA7031-6883 wheel will fit your 1998 Tacoma Truck.