Pro Comp 2.5 Inch Leveling Lift Kit - PLF09111


  • Pro Comp Suspension | Part Number: EXPPLF09111
  • Rear Lift Method (Where Applicable):Front Lift Only
  • Front Lift Method:Strut Spacers
  • Finish Color:Black
  • Position:Front
  • Fitment:Direct Fit
  • Spacer Material:Polyurethane


The heart of each lift kit incorporates a precision computer aided designed coil spacer molded from a proprietary polyurethane formulation that provides a firm yet supple ride without sacrificing articulation on and off-road. These kits utilize the stock coil springs and come with all necessary hardware. In order to maximize performance and ride quality, we highly recommend replacing your existing shock absorbers with performance series shocks.


Looks good, very difficult to install

Product looks great on my 2013 F150 but was a pain to install. It WILL NOT go on vehicle without removing lower control arms! Directions that come with it are for the older model F150 also. This is my 3rd level/lift I have done(one dodge, one jeep, one F150), other two were easy, this one was not. I have done full lift kits that took less time than this kit.

from Texas |
pro comp leveling kit

Good all around product. Happy with the look

from Davenport, IA |
2.5" Procomp Leveling System

The instruction didn't require you to disconnect the tie rod from the spindle but that is the only way to get enough room to get the 2.5inch spacer in. I lost time in figuring that out for myself or else it would have only taken two hours to get in in.

from Alvin, TX |
quick simple install

Improves the looks instantly. Exactly as described gave a 2.5" lift in the front.

from cape coral,fl |
A great buy!!

This my second leveling kit thru 4wheelparts. I'm stoked on the part, but was bummed that they didn't have it in stock at waipahu and had to order online.

from Kauai, Hawaii |
easy way to gain room for tires

Easy to install, little over an hour both sides.

from Minneapolis, MN |
2.5 Strut Spacer on a 2011 F-150

This 2.5 inch strut spacer perfectly leveled my truck. I have 33" BFG All Terrians with 18" rims and I couldn't be more happy with the lift of the truck.

from Madison, GA |
Great product by Pro Comp

This kit was super easy to install and makes the truck sit perfectly level. I'd recommend this to anybody.

from Purdy, Mo |
easy and clean look

Super easy to install. Great look. And you can fit 35s with out a lift.

from grandbay Al |

A GREAT EASY INSTALL. Was done stress free. End product look great.Took truck in next day for alignment and was off very minimal.I Would reccommend it to anyone who wants their truck to look level .

from Antonito ,Colorado |

Question & Answers

11 Answered questions

Will this work on a 2012 F150 XLT 4x4? It says it fits 2004 to 2013 Ford F-150 2WD and 2004 to 2008 4WD. So will that not fit 2009-2013 F150 4x4?

Asked by Brad from Niceville, FL on

Hello Brad, Yes, this will fit your vehicle application. Thank you for the question.

Answered by from Niceville, FL on

I have a 2006 ford f150 2wd, would i be able to fit 35s off roed tires with this product

Asked by paul from fort worth, Tx 76140 on

Hello Paul, Thank you for asking. You can run 35 inch tall tires but you are going to rub like crazy. It would be a safer bet to run 33"s.

Answered by Robert from fort worth, Tx 76140 on

Is the strut spacer all I will need to level my 2005 Ford F150 Lariat 4x4? Are other parts required recomended?

Asked by Beau from United States on

Hello Beau, Thank you for asking. The only thing you will need to do after installing the Pro Comp Suspension 2.5 Inch Lift Strut Spacer is to get a wheel alignment.

Answered by Robert from United States on

See all questions & answers


Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now


Save 20% On Select Pro Comp Leveling Kits