A: Yes they will still work. You would take them off of your factory wheels and install them on these new wheels. Wheels weigh 34# each.

A: These wheels will fit your Tahoe with no problems. This wheel has a center bore of 108mm however this wheel is lug centric and not hub centric. Meaning the wheel is not centered by sitting on the surface of the hub, but instead centered using conical seat lug nuts. Which Pro Comp makes a kit for your vehicle. PXA16144 (chrome kit) and PXA16144B (black kit)

A: Thanks for the inquiry rockinjk, the Pro Comp Alloy Wheels Series 7005, 17x8 with 5 on 5 Bolt Pattern - Flat Black part # PXA7005-7873 you will need aftermarket lugs try part # EXP21184B.

A: Hello Wheels, This wheel is lug-centric. Thank you.

A: Hello Quincy, No, they are cast into the wheel. Thank you.

A: Hello KJ, Yes, you can install the factory tires on the Pro Comp Alloy Wheels Series 7005, 17x8 with 5 on 5 Bolt Pattern - Flat Black PXA7005-7873. This wheel is the correct lug pattern as well. Thank you.

A: Thanks for the inquiry Cheryl, the Pro Comp Alloy Wheels Series 7005, 17x8 with 5 on 5 Bolt Pattern - Flat Black part # PXA7005-7873 this Is the correct bolt pattern 5/5 and should fit the stock tire size.

A: Thanks for the inquiry Roy, the Pro Comp Alloy Wheels Series 7005, 17x9 with 5 on 5 Bolt Pattern - Flat Black part # PXA7005-7973 this is correct for your vehicle and will fit with no issues.

A: Hello Tara, The Pro Comp Alloy Wheels Series 7005, 17x8 with 5 on 5 Bolt Pattern - Flat Black has 4.5"backspacing which means 3.5" will be in the front of your 8" wide wheel.

A: Hello Dto, The Pro Comp Alloy Wheels Series 7005, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black weight is 26lbs.

A: Cory from Erie, Pa,Thanks for the question.Part #PXA7005-7883 Pro Comp Alloy Wheels Series 7005, 17x8 with 6 on 5.5 Bolt Pattern - Flat Black will work on a 2014 1500 Silverado.

A: Hello Bob. The Pro Comp Alloy Wheels Series 7005, 17x8 with 6 on 5.5 Bolt Pattern - Flat Black, part # PXA7005-7883, has a center bore of 108mm. Thank you

A: Hello Bob. The center bore for Pro Comp Alloy Wheels Series 7005, 17x8 with 6 on 5.5 Bolt Pattern - Flat Black, part # PXA7005-7883, is 108mm. Thank you

A: Hello Bob, the Pro Comp Alloy Wheels Series 7005, 17x9 with 6 on 135 Bolt Pattern - Flat Black part# PXA7005-7936 has an 87 mm hub bore. Thank you for your inquiry.

A: Hello Bob, Thank you for asking. Pro Comp Alloy Wheels Series 7005, 17x9 with 6 on 135 Bolt Pattern - Flat Black can be used with a 255/80/17. These wheels do have an aggressive offset and will cause them to stick out past the fenders of the vehicle.

A: Thanks for the question. PXA7005-7983 You are going to want to order PXA26104B part number for your vehicle. Thank you

A: Hello Yoooper, the Pro Comp Alloy Wheels Series 7005, 17x8 with 6 on 5.5 Bolt Pattern - Flat Black will work great on a tire up to 13 inches wide. Thank you for your question.

A: Thanks for the inquiry GV, the Pro Comp Alloy Wheels Series 7005, 17x9 with 5 on 5 Bolt Pattern - Flat Black part # PXA7005-7973 will not work you have a 6 lug you will need part # PXA7005-7936 17x9 6X135MM.

A: Thank you for your question. Yes the Pro Comp Alloy Wheels Series 7005, 17x8 with 5 on 5 Bolt Pattern - Flat Black comes with the center cap shown

A: Rikki- Thanks for asking. Yes the Pro Comp Alloy Wheels Series 7005, 17x9 with 5 on 5 Bolt Pattern in Flat Black are compatible with a 255/75/17 BF Goodrich Mud Terrain KM although with a wide wheel like this the tire may not look right on your 2009 Jeep Wrangler JK Rubicon

A: Hello Mike, Yes, the Pro Comp Alloy Wheels Series 7005, 17x9 with 6 on 135 Bolt Pattern - Flat Black PXA7005-7936 will fit the LT315/70R17, Radial Xtreme A/T by Pro Comp Tires. Thank you for the email.