Power Tank 10lb. Basic System

A: A commercial supplier is only going to fill with co 2 , because that’s what tank is valved for &  rated for on bottle. With that said yes you could fill with nitrogen but your going to need your own bottle of nitrogen & guages with adapters to fill. In my opinion not worth the cost. Just use co2!

A: No, all gas cylinders manufactured in the US have stamps which tell a gas supplier what they can be filled with. A Power Tank is stamped for CO2. The valves are different. Just like different gas cylinders are stamped for specific gases, the valves themselves have different threads as outlined by the Compressed Gas Association. Power Tank CO2 bottles follow the industry standards of CGA-320 or CGA-302 valves.

A: It depends on the location. In the bed of a truck, you can get additional mounts secured to the bed liner. You just need a place to drill or have at least 2 bolts installed  for the mounting plate. I’d recommend at least 4 bolts to keep it all together. 

A: It comes with a 250 PSI regulator. But tanks hold 10 lbs of Liquid CO2 Here is a interactive map of where to get tanks filled https://powertank.com/pages/co2-map

A: This kit comes with a mounting bracket seen in the image, Thanks!

A: Hello Bill, the Power Tank super bracket is capable of being attatched to a roll bar with their roll bar u bolt clamps. Thank you for your question.

A: Hello EJ, Thank you for asking. The Power Tank 10lb. Track Pack Package B System is 24 inches tall. That is to the top of the handle.

A: Hello Joe, Thank you for the question. We suggest the Powertank Blow Gun Kit Part Number: AASATL-2001

A: DB- Thanks for the question. The Power Tank 10lb. Package B System will fill quite a few 32x10.50 tires depending on how deflated they are.