Power Stop Z36 Truck and Tow Brake Upgrade Kits

A: I don’t see that they are any bigger than OEM. I would say they are upgraded. They look and work great. So much better than before. 

A: This is just an upgrade for any time you add weight to a vehicle by hauling a load, towing a trailer, or simply adding a larger wheel/tire combination, Feel free to call into the sales line to talk options and place an order. If you live near a store you can set it up for in store pick up or install. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: No it does not 

A: No it does not learned that the hard way. Better off buying it direct then from 4wp

A: Fit your Dually is 2012-2019 GMC SIERRA 3500 HD DRW / CHEVROLET SILVERADO 3500 HD DRW EVERYTHING YOU NEED IS IN THE BOX: Z36 Carbon-Fiber Ceramic Brake Pads (Severe-Duty stopping power designed for trucks & 4x4s) | Premium Stainless-Steel Shims (Better heat dissipation & virtually noise-free braking) | Drilled, Slotted & Zinc Plated Rotors (Provide maximum cooling and helps protect against rust and corrosion) | Premium Stainless-Steel Hardware & New Pin Bushing Kit (where applicable) | Hi-Temp Brake Lubricant

A: 2019-2012 Chevrolet Silverado 2500 / 3500 | Every caliper is expertly assembled, lubricated, and pressure tested in their Chicago, IL facility. Z36 Carbon-Fiber Ceramic Brake Pads - Severe-Duty stopping power designed for trucks & 4x4s. Premium Stainless Steel Shims - Better heat dissipation & virtually noise-free braking. Drilled, Slotted & Zinc Plated Rotors - Provide maximum cooling and helps protect against rust and corrosion.

A: This Big Brake Conversion Kit is a front & rear axle for 2007-2018 Jeep Wrangler (JK/JKU) models. This bolt-on upgrade is recommended for Jeeps with suspension lifts, bigger tires and increased weight due to steel bumpers, skid plates and other heavy modifications.

A: Yes we do. Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: Feel free to call into the sales line to talk options / ETAs and place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: We do not stock the components that make up this kit. Please call our sales team and they can call the vendor to see if they have these parts in stock Toll Free: 1-877-474-4821

A: No it will not. This is a GM kit.

A: They are single piston.

A: Yes, this brake kit will fit your 2002 Ford F-350 with dual rear wheels

A: Yes. The Power Stop site has some additional vehicle attributes that you might want to verify before purchase though.

A: Per Power Stop all rotor are made to stock measurements. Thanks!

A: The front rotor outside siameter is 12.990". The rear rotor outside diameter is 13.580"

A: As long as the part is not installed, still new and you return it in 30 days from purchase, you should be fine without a restocking fee.

A: No core charge on old calipers

A: No, there is no core charge.

A: Hello Erik, This package will give you two rotors and 4 brake pads for the from of the vehicle. Thank you for the question.

A: Hello Jim, Yes, the rotors are 11.61" in diameter. They will fit your vehicle. Thank you.

A: Hello Scott, You are correct. This is the truck part number for your vehicle application. Thank you for the question.

A: Hello John, The front rotor diameter is 13.03" and the rear rotor is 12.84". Thank you for the question.

A: Hello Son, This part number will not fit your application. The correct part number is Part Number: PSTKC2068 for your vehicle. Thank you for the question.

A: Hello Jake and thank you for your question! Power Stop Heavy Duty Truck and Tow Brake Kit part number PSTK2073-36 fits 2001 to 2010 2500HD GM.

A: Hello Hoppy, The front rotors are 13.030" and the rear are 12.840" in diameter. Thank you for the question.

A: Hello Dely, This specific part number will not fit your vehicle application. We do offer the Powerstop Heavy Duty Truck And Tow Brake Kit part number PSTK5468-36 that will fit your application and requirements. This package will dramatically increase your vehicles stopping power when pull your 14.000 lb toy hauler. Thank you for the question.

A: Hello jasonr, The PSTK2442-36 fits the 2004 to March of 2005 vehicle build dates. The PSTK212-36 fits April 2005 to 2007 build dates. Thank you.

A: Hello Oldharletguy, You are correct. This kit comes with front and rear rotors and pads. Thank you.

A: Hello kernjkern, This is a 1-Click Extreme Truck & Tow Brake package that gets you all 4 (2 front and 2 rear) rotors and both front and rear brake pad kits. Thank you.

A: Hello Kelly, Yes, the Power Stop Heavy Duty Truck and Tow Brake Kit PSTK1866-36 will fit your vehicle application. Thank you.

A: Hello Bruce, Installing stainless steel brake lines will increase line pressure. This will give you a much stronger brake peddle feel. The also help avoid typical rubber brake line failure. I personally upgrade my brake lines with every new vehicle I purchase. I hope that helps. Thank you.

A: Thanks for the inquiry Tom, the part # PSTK5561-36 carries a 3 year / 36 K mile warranty.

A: Thanks for the inquiry v10, the Power Stop Z36 Extreme Performance Truck & Tow 1-Click Brake Kit with Calipers part # PSTKC1906A-36 this does have a core charge $120.00.

A: Hello earmuff, This is the correct kit for your vehicle application. Thank you.

A: Hello Earmuff, The K1797-36 fits the 2005 to 2007 Ford f350 Super Duty 2WD. The K1782-36 fits the same vehicle with 4WD. Thank you.

A: Hello dadoo, The Power Stop 1-Click Extreme Truck And Tow Brake Kits has Drilled & Slotted rotors will reduce the heat and the Z36 Extreme Truck and Tow brake pads. They are not a larger diameter brake kit. All oversize brake kits require a new larger caliper.

A: Sir, Part#PSTK1894-36 is for the 2wd and the part# PSTK1906-36 for 4wd everything is the same except for the front rotors, on the 4wd you get rotors and the 2wd you get rotor hub assembly which is more $$ thanks for the question.

A: Sir, the picture on the website is a generic one and is used for multiple part#s the rotors in the kit will not change dimensions from your stock rotors the only difference is the materials used and the slots and drilled holes. Thank you for your question.

A: AR8580XPR Drilled Slotted Rotors Z36-756 Truck / Towing Pads S4790 Calipers Hello Robby this is for one end of the vehicle so you need to order two kits to do both axles.

A: Hello Yes this is the correct kit for your Dodge and will work with the stock calipers.

A: Hello Lee The K1393-36 is for the 2WD 2003 - 2005 The k1906-36 is for the 4WD built after Jan. 2000 The K1906-36 is the correct kit for your truck.

A: Hello Andy The k1906-36 is for single wheel trucks and the k1907-36 is for the dual rear wheel trucks.

A: Hello SR, and thank you for your inquiry on the Power Stop Heavy Duty Truck and Tow Brake Kit for your 2003 FORD F250 6.0 Liter Diesel - 4wd . Yes, this kit will fit your vehicle. Her is the link to get you back to the order page: http://jo.my/yacjum.qrcode

A: Hi wildanimal18 This kit will come with all necessary hardware to properly install this kit Thank You

A: Hello Jeff We recommend the Power Stop kit for the Dodge trucks. They have been working out very well for towing. The part number for the front of your truck is PST K5411 includes the rotors and pads.

A: Hello Lumnuts, The Power Stop Heavy Duty Truck and Tow Brake Kit is offered for some dually applications depending on the factory brake system.

A: Hello Troy Yes these are for the 4x4 trucks and will work with the ABS system.

A: Hello Shawn, the Power Stop Heavy Duty Truck and Tow Brake Kit will work really well at an affordable price for the braking upgrade you are looking for. Their rotors resist warping very well under heavy braking. Thank you for your inquiry.

A: Hello Jordo, the Power Stop Heavy Duty Truck and Tow Brake Kit part# pstk1233-36 will fit a 2001 4 runner with 11.69" front rotors. If your rotors are lager you need part# pstk1236-36

A: Hi John The PST211-+36 jkit is for the FRONT brakes only 2 rotors and 4 pads. For a complete kit please check this link for complete kits for front and rear http://jo.my/kuog7e Thank You

A: Hello georgette, Thank you for the question. This part number will not fit your vehicle application. The correct part number is PSTK2068-36

A: Hi Brose This Brake pad and rotor kit will fit your 2005 Ford Excursion 4x4. Thank You

A: Hi Phil This kit does not require you to change the brake hoses to install the kit. These rotors and pads fit the factory calipers and hubs. Thank You

A: Hi Phil This kit come as a set of front rotors and brake pads for both sides of the front axle. You will receive 2 rotors and 4 brake pads. Thank You

A: JTS- Thanks for the question. The Power Stop Heavy Duty Truck and Tow Brake Kit will not fit your 07 silverado 1500

A: Hello Evan, Thank you for the question. Yes, this kit will fit a stock wheel.

A: DBS- Thank you for your question. The Power Stop 1-Click Brake Kit PSTK2119-36 3 1/4 90 to 98 XJ. The PSTK2152-36 is 3 inches for late model 99-01

A: Dale- Thanks for the question. This Power Stop Heavy Duty Truck and Tow Brake Kit is exactly what you are looking for to increase the braking performance of your 2000 Toyota 4Runner

A: Hi AJ This is a real nice brake set up for your truck. the next best option would be a big brake kit that will require the replacement of the wheels and tires to go with a large rim to clear the brakes http://jo.my/30khsq Thank you

A: Hi Lynn The manufacture does not provide us that detailed information only the applications. What are you working on or are you trying to build.? Thank You

A: Hi Tuffie Here is a link to the rotor and pad kit that will fit your truck and work with the stock brake calipers. http://jo.my/6m3x2b Thank You

A: Carlos- Thanks for asking. This Power Stop Heavy Duty Truck and Tow Brake Kit would be a perfect combination for your FJ Cruiser equipped with the ARB Bull Bar and Rack.

A: Dana- Thanks for the question. This Power Stop Heavy Duty Truck and Tow Brake Kit would be perfect for your 2009 Chevy Silverado as it will help handle the bigger work loads better.

A: Hi Bremco The kit you chose will not fit your application. i have included a link to some kits that will Thank You http://jo.my/ez9ufy

A: Hi Tumblinteal This Power Stop Heavy Duty Tow brake kit will fit your 2006 Ford F-150 Thank You

A: Hi Ron The Zink will were of the were section of the brake rotor and the remainder will prevent rusting of the rotors. the rotors can be turned in a standard machine and require no special handling by a qualified brake machinist Thank you.

A: Thank you for your question. No the Power Stop Heavy Duty Truck and Tow Brake Kit part number PSTK1906-36 will not sit your 2001 Toyota Tundra

A: Hi Rich This is a technical forum and i cannot adjust pricing in any way you will have to contact our sales team and ask them. Please call Toll-Free: 877-474-4821 and speak with a sales person I am 100% confadent they can match their price for you Thank You

A: Rusty- Thanks for the inquiry. The Power Stop Heavy Duty Truck and Tow Brake Kits coated rotors will resist rust but still may rust due to road contaminates. If your truck came with double piston calipers then this pad and rotor will fit your truck.

A: Yes the power stop brake kit comes with 2 rotors and 4 brake pads