Power Stop drilled and slotted rotors give you the advantages of both drilled holes for cooling and slots to sweep away gas and dust. Power Stop rotors use only the finest blanks and feature G3000 grade castings from the best foundries. All drilled and slotted rotors, except for hub rotor assemblies, are silver zinc plated to resist rust. The drilled and slotted design is most popular performance rotor for street and day track applications
This was my 1st aftermarket rotor purchase so I wasn't sure what to expect. The shipping, price and install all went great.
The warranty is 3 years on the rotors and that is about how long they went before warping.
Unfortunately my local shop said that these can't be turned so I'll have to buy another set.
By Moot from NC
Looks great, works better than OEM
I would recommend these and purchase them again. The fit my 2005 Ford Excursion 4X4 and look great peeking through the rims. I did notice that they were a little bit looser on the studs than the OEM rotor. Once the rim was tighened down it was good to go. Stopping power is definitely better, even though I've only done the rear so far.
By Alex from Washington DC
I would buy this product again
Installed power stop brakes for towing our travel trailer.
By Frank Z from Fort LAUDERDALE Fl
Great Rotors for the Price
My Grand Cherokee kept warping rotors so I replaced the front rotors with these Power Stops and it's been 15k with no issues. I liked them so much that I just bought these for the rear brakes as well. I wish I would have bought these sooner because over the 10 years I've owned this jeep I replaced the rotors 3 times before purchasing these drilled and slotted rotors. I live in the moutains and relay on my brakes a lot and have not had any issues with these Power Stops.
By 2001 Grand Cherokee from Evergreen CO
Excellent, but loud
Installed on 07 Titan, eliminated front brake judder. I use truck as everyday driver, as we'll as pulling a 6000# camper, and 3000# boat. These brakes work great for loads as well as normal daily commute. Just a comment about the noise, when you break you can hear the pads driving against the slots and holes in the rotors, not a problem, just a word of warning.
By Texas Titan from Temple, Tx
exceptional brake product
These brake kits are awesome and complete. The manufacturer misslabeled the box and sent the wrong rotors initially, but 4 Wheel Parts made it easy to return them and replace them, even though I live in Canada. Its a great kit and I would buy them again without hesitation.
are these for a 1997 ford f150 4x4 extended cab off road package.
toes from on
Thanks for the inquiry toes, the Power Stop Brake Rotor part # PSTAR8557XPR these will fit your vehicle.
I have 2003 f-350 6.0 its a 2wd drw the front rotor look like the AR857XPR
your site said not for my truck the ones that said fit don,t look like them. i am looking for the front and would like then drilled and slotted.
Gary from Wauchula,fl on
Thanks for the inquiry Gary, the Power Stop Brake Rotor part # PSTAR8574XPR we only showing the rear available for your vehicle.
from Wauchula,fl on
Will this work with OEM brakes?
Can I swap these with my OEM rotors without changing anything else?
2007 GMC 2500hd classic SLE CREW CAB 6.6L A1000 4WD.
BIGRUSS from Bakersfield, CA on
These rotors are a direct replacement for the factory rotors and you will not need to replace anything else to fit the rotors BUT i would highly recommend that you replace the brake pads with the installation of the new rotors. Thank You
Power Stop Extreme Performance Brake Systems has a brake system for any application. There is the Z36 Extreme Truck & Tow brake pads. Then there is the Z26 Extreme Street Performance Brake Pads for your daily driver. Power Stop also makes performance drilled and slotted Evolution Rotors. Each of these lines offers the highest in performance brake quality without the high price. Power Stop uses third party testing to certify that select brake pads offer 20% more stopping power than other leading aftermarket pads. So you get performance with peace of mind. Power Stop brake pads are manufactured with the company's own innovations such as positive molding technology to insure more consistent material density during fabrication. This gives you consistent, fade-free braking. Shop Power Stop Now