Our Remote Master Disconnect with Mechanical Latching Solenoid is ideal for everyday vehicle applications and is a simple and effective anti-theft deterrent. It uses a 100 AMP continuous duty solenoid which is activated by an easy to hide momentary push button. No risk of accidentally draining your battery with this latching solenoid. Kit comes complete with one solenoid, one switch, mounting hardware, wire and connectors.
I had an electrical grimlin that was killing my battery, after a week of not being able to find where the problem was coming from I decided to just get a kill switch. Upon first looking all I found was the big bulky switches that you had to drill a big hole in your dash and run a battery cable in and out of your cab and I thought their has to be something better out there then I came across this little gem.
install is as easy as it gets with good instructions and only runs one grond switch in to your cab! you cant mess that up if you tried.
Web sites tell you to use this swtch to disconect your fuse box and accessories and the directions tell you it is to disconect your starter wire truth is you can hook it all up to the switch. I ran a cable from the battery to the switch terminal and ran everything that was originaly attached to the battery to the other switch terminal and it handeled it just fine just dont forget to turn it off or the switch will kill your battery.
4.0Master Disconnect Switch is Painless!
The Master Disconnect Switch was very easy to install...I spent more time hiding the on/off toggle switch than I did on the entire installation. It seems to be holding up just fine despite being used in an off-road vehicle.
There's a couple of important factors you should consider:
(SECURITY) The switch disables the ability to start the vehicle using the key but it can still be push started. So if you're using the Master Disconnect Switch solely as a theft deterrent I would also recommend using Painless' Battery Disconnect Switch to also disable the battery (no battery no spark!). This will provide you with a dual layer of theft protection. I do enjoy the security of the Master Disconnect Switch when it comes to being car-jacked...if someone accosts you in a parking lot or gas station and takes your keys they are not going to just jump in, start it and drive off (provided you've hidden the toggle switch well enough and you have the switch engaged!).
(OPERATION) The switch will drain your battery flat if left in the "off" position for extended periods of time ("off" meaning the solenoid is not engaged and the vehicle can be started). I learned the hard way by killing a Red Top Optima battery when I did a weekend project. I parked Friday evening and started the work (the vehicle couldn't be driven so I didn't engage the Master Disconnect Switch) and when I tried to start it Monday morning it was completely dead. I now keep the switch in the "on" position AT ALL TIMES only disengaging it when I need to start my Jeep.
Check out the instructions tab on the page. There should be a link to the wiring diagram for that part.
from 4WP HQ
Can this unit be installed on the ground/negative circuit or does the unit circuitry prevent it?
1999 F350, 7.3l diesel
Answer this question
It will work on the ground side of the battery as long as you connect all the smaller ground wire also from the body. With dual batteries it will be a little harder to hook the unit up also.
Join our mailing list to receive information on new
products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!