Mickey Thompson Classic Baja Lock Matte Black Wheels

A: No hub rings are necessary for the JK but only need 60 degree conical bulge lug nuts.

A: I see a few stock height 4x4’s running this spec wheel so it’s possible but not enough info to confirm. Please call our sales team for more information Toll Free: 1-877-474-4821

A: Yes you can use TPMS on these wheels.

A: What do you mean by offroad? the TRD submodel? Yes this is the correct bolt pattern for that vehicle. What size tires are you planning to run? You would need to verify the offset and backspace before purchase. Please call our support team for further assistance. Toll Free: 1-877-474-4821

A: These are one-piece construction. I'm not sure of other wheels we have that the rings come off that are not beadlocks. Please call our sales line with the size and bolt pattern you need and they can assist you further Toll Free: 1-877-474-4821

A: Thanks for the inquiry, the fordlover, the Mickey Thompson Classic Baja Lock, 15x10 with 5 on 5.5 Bolt Pattern - Matte Black part # M/T90000020049 these will fit a 88 F150.

A: Thanks for the inquiry flying humanoid, the Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black part # M/T90000020045 they would have had the same backspacing.

A: Hello Snell, No, your vehicle requires a 17" diameter wheel that is 8" to 9" wide. Thank you.

A: Hello Deane For the 2007 Ram 2500 4X4 you will need M/T90000020090. This is a 17x9 Mickey Thompson Classic Baja Lock Wheel. It is an 8x6.5 inch lug patter which fits the Ram2500. I recommend 1 each PXA26195 splined Lug Nut Kit for each set of wheels. They fit 9/16 inch studs. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello Mark, 15 x 10 wheels will sit outside the wheel well pretty far, no matter the offset/backspace. I highly recommend a 15 x 8 or 15 x 9 if you are looking to keep the tire under the factory fender flares. However, this wheel will fit your vehicle application with a 12.50 tire. Thank you.

A: Hello JT, Yes, this wheel comes with the center cap. Thank you for the question.

A: Hello RichM3, No, the rings on the lip of this wheel are not removable. They are cast into the wheel. Thank you for the question.

A: Thanks for the inquiry Micah, the Mickey Thompson Classic Baja Lock, 15x10 with 5 on 5.5 Bolt Pattern - Matte Black part # M/T90000020049 a 15 inch wheel will fit but the width you've picked is too wide for the tire, we recommend a 15x8 part # M/T90000020046 .

A: Thanks for the inquiry kaden, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020072 this wheel is pretty wide I would recommend a 15x10 part # M/T90000020070

A: Thanks for the inquiry kaden, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020072 this wheel is pretty wide I would recommend a 15x10 part # M/T90000020070

A: Hello Dan, Yes, the Mickey Thompson Classic Baja Lock, 15x7 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020044 will fit your vehicle application. Thank you.

A: Thanks for the inquiry KristPJ, the Mickey Thompson Classic Baja Lock, 17x9 with 8 on 6.5 Bolt Pattern - Matte Black part # M/T90000020090 the center bore is 5.15 , these are aluminium and we don't know what it would take to make them a true bead lock.

A: Hello JAL, The wight of this aluminum wheel is 28.90 lbs. each. Thank you.

A: Thanks for the inquiry Damion, the Mickey Thompson Classic Baja Lock, 16x10 with 8 on 6.5 Bolt Pattern - Matte Black part # M/T90000020082 this wheel will work for you just fine.

A: Hello Bubba, Yes, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020072 will fit your vehicle application. Thank you.

A: Thanks for the inquiry Q, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020072 is incorrect, you have a 6/135MM bolt pattern and must run 17 inch wheels or taller.

A: Hello Pat, The Mickey Thompson Classic Baja Lock, 15x8 with 5 on 5.5 Bolt Pattern - Matte Black M/T90000020046 will fit your vehicle application. All aluminum wheels will come with a closed cap. For your vehicle application you will not be able to run the front caps since you have the locking hubs. Thank you.

A: Hello Miguel, The Mickey Thompson Classic Baja Lock, 15x10 with 5 on 4.5 Bolt Pattern - Matte Black do come with center caps. Wheels do not come with the lug nuts. We do offer the Part Number: ProCmpChromeLug or Part Number: ProCmpBlackLug for your vehicle. Thank you.

A: Hello Motorhead, You will need to remove the center cap for the lockout hubs to fit. Thank you.

A: Sir, this is the correct wheel and the correct lug kit the wheels will probably stick out about the same as the current ones you have. Hope that helps thanks for the question.

A: Mike, lug-nuts are not included. sold separately Thanks for your question.

A: Sir, yes they come with center caps and lug are not included. thank you for your question.

A: Sir, there is no ring it is part of the lip of the wheel all one piece. Thank you for your question.

A: Sir, this wheel is 4.17 bore size and the only wheel in that bolt pattern. Thank you for your question.

A: Hello There are black open caps for the Jeeps and trucks with locking hub's. Thanks

A: Hello Yes they will work on your 88 4 Runner. thanks

A: Yes the Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black will work on a WJ. With the -12 offset they will be pushed out of the wheel well more than factory. Hope this helps!

A: Hello there,the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black will stick out about 2-3" out of the wheel well. They will work as long as you have a leveling kit. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the inquiry Nate, the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020089 you shouldn't have any problems with rubbing if the truck is raised a little bit.

A: Hello Luke, Thank you for asking. The Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black mounted with a 265/70/17 is going to be the largest combo you can put on your truck stock height. If you do have any issues, you can always add a 2" leveling kit. This wheel will does have an aggressive offset and will cause them to stick out passed the fenders.

A: Hello Toyota Compact Trucks, Thank you for asking. The Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black is the correct bolt pattern and would clear your locking hubs. 15x12 are going be to wide if you do not have a lift kit on your truck. If you think you can run the 12" wide, a 33x12.50 tire can be mounted to it.

A: Hello johnnytrout and thank you for your question! Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black has the simulated bead ring that is not removable.

A: Yes the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black will clear on an 05 sierra with just a leveling kit. Hope this helps!

A: Hello Chris, the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part# M/T90000020089 will work on your 1994 Gmc 1500 pickup. Thank you for your question.

A: Hello Smurf, The Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black will not fit on your truck. You will need to find a wheel that is 17" diameter or larger.

A: Hello Butch, The Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black will fit on your 2005 Nissan Titan.

A: Thanks for the question. Sorry, but these will not fit your vehicle. At this time they are making this size wheel to fit your vehicle. They are made in the 15 x10 for you Jeep. You will want to order part # M/T 90000020048 Thank you

A: Thanks for the inquiry Robbie, the Mickey Thompson Classic Baja Lock, 16x8 with 8 on 170 Bolt Pattern - Matte Black part # M/T90000020080 is incorrect you'll need part # M/T90000020079 which is a 8X6.5 bolt pattern.

A: Hello Jose, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black part# M/T90000020072 will fit your 98 k1500. Thank you for your question.

A: Hello there, The Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black will work fine with 2010 Toyota Tacoma sport. You'll also need part number PXA21134B 12X1.50 lug nut kit to finish the job. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Issa, the Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black part# M/T90000020086 weighs in at 28 lbs. Thank you for your question.

A: Hello Fred, the Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black part# M/T90000020045 will be a perfect setup with the tires you are looking at. A15x9 would also work with that tire and stick out a bit further but a 15x10 is too wide. Thank you for your questions.

A: Hello Jimmy, Thank you for asking. The Mickey Thompson Classic Baja Lock, 16x8 with 6 on 5.5 Bolt Pattern - Matte Black will work with your 05 Toyota 4Runner and accept TPMS

A: Thanks for the inquiry chris, the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020089 will require a splined drive acorn style lug nut.

A: Hello Chris, the Mickey Thompson Classic Baja Lock, 15x8 with 5 on 5.5 Bolt Pattern - Matte Black part# M/T90000020046 is black with a machined ring. Thank you for your question.

A: Hello Neto, The Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black will not fit your truck. You will need to stick with a 15" wheel.

A: Hello Butch, The Mickey Thompson Classic Baja Lock, 15x10 with 6 on 5.5 Bolt Pattern - Matte Black is no longer available in the polished finish.

A: Hello Sfsquared, the Mickey Thompson Classic Baja Lock, 16x8 with 6 on 5.5 Bolt Pattern - Matte Black part# M/T90000020078 will fit great on your 4 runner. Thank you for your question

A: Thanks for the inquiry Yanman, the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part # M/T90000020089 have a 4.25 inch center bore.

A: Tony,Thanks for the question.Part#M/T90000020089 is the incorrect part #.The correct part # you will need is M/T90000020088 which is 17x9 6x135.

A: Thanks for the question Jeepguy Mickey Thompson Classic Baja Lock, 15x10 with 5 on 5.5 Bolt Pattern - Matte Black M/T90000020049 These will approximately stick out about 2-3 inches if you are running stock wheel on your vehicle right now. these will give you that wide stance you are looking for. Thank you Answer box sales

A: Thanks or the question Chico Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020089 Yes. these will fit on your 2010 1500 Chevy truck. Thank you Answer box sales

A: Hello Cole, The Mickey Thompson Classic Baja Lock, 15x10 with 6 on 5.5 Bolt Pattern - Matte Black come with center caps & will fit on your 92 Chevy 1500 6-5.5

A: Hello Zach. The Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black will fit a stock 95' Jeep, and you can definitely put the ProComp Radial Xtreme A/T tires on them as well. Thank you

A: Thanks for the inquiry dieselsmk, the Mickey Thompson Classic Baja Lock, 16x12 with 8 on 170 Bolt Pattern - Matte Black part # M/T90000020085 all Mickey Thompson aluminum wheels come with closed center caps.

A: Joe, Backspacing and offset are just 2 different ways of measuring the same thing. The Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black have a 4.5" backspacing and a -12 offset which is the most common setup when being used on lifted applications. Hope this helps!

A: Hello Banga, the Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black will fit your vehicle. You need the wheels with a 6/5.5 bolt pattern. Thank you for your inquiry.

A: Hello Swan, the Mickey Thompson Classic Baja Lock, 16x8 with 6 on 5.5 Bolt Pattern - Matte Black part# M/T90000020077 will not fit your vehicle. At this time we do not carry any 16" wheels that fit the 2005 and newer Tacoma's. Thank you for your inquiry.

A: Sarah, No the Mickey Thompson Classic Baja Lock, 16x8 with 5 on 5.5 Bolt Pattern - Matte Black will not work on your F-150. The correct bolt pattern it 5 on 135.

A: Hi Guadeloupe You will have to check with your credit card company to see how they will convert from $ to € and if there is a fee for doing it. Thank You

A: Thank you for your question Guillaume. The Mickey Thompson Baja Lock does not come in Chrome. Here is a link to the Baja Lock wheel that will fit your 2012 Jeep JK in a 17x9 http://jo.my/2dquhy

A: Farhan- Thanks for your question. The Micky Thompson Classic Baja Lock center bore is 4.177 inch.

A: Thank you for your question Art. No you will not be able to choose a different center cap for this wheel as the cap mounting position for the Classic Baja Lock is specific.

A: Hello Rob, Thank you for the question. Yes, this wheel is DOT approved. This is a simulated beadlock wheel, not an actual beadlock.

A: Thank you for your question Odd the Titain. With a 12 inch wide rim you will want to use a 15 inch wide tire. When using a 12 inch wide rim and a 12.50 inch wide tire the sidewall will be straight and not have much cushion or give.

A: Thank you for your question Adam. With a 12 inch with rim you will want to use at least a 15 inch wide tire. When using a 15x12 rim and a 12.5 inch wide tire the sidewall will not have much, if any, give or cushion.

A: Thank you for your question Troy. Here is a link to the Mickey Thompson Classic Baja Lock in a 15x8 in 3 different bolt patterns http://jo.my/jemvr5

A: Hello Kavilyn, Thank you for the question. The Mickey Thompson Classic Baja Lock, 15x12 with 5 on 5.5 Bolt Pattern - Matte Black Part Number: M/T90000020071 are sold single.

A: Hello Ksully79, Thank you for the question. The Mickey Thompson Classic Baja Lock, 16x8 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020077 will fit your vehicle application.

A: Thank you for your question. Yes that tire and wheel combo will work together.

A: Hello Dom, Thank you for the question. The Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5.5 Bolt Pattern - Matte Black do not come with valve stems or lug nuts. We do offer them as a option.

A: Hello Charles, Thank you for the question. Yes, the Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020072 come with center caps.

A: Hello Jimmy, Thank you for the question. Yes, the Mickey Thompson Classic Baja Lock, 16x8 with 6 on 5.5 Bolt Pattern - Matte Black will fit your vehicle application.

A: Hi Brandon I am sorry but you will have to call the store personally to see what the stock. They should be able to order in the wheel for you to look at before you buy . Thank You

A: Thank you for your question omar david.Mickey Thompson does not make the Classic Baja Lock in a 16x10 with a 5 on 5.5 bolt pattern

A: Thank you for your question Rodney. Yes you can run an adapter with these wheels.

A: Thank you for your question A1doggie. I will need the full tire size to tell you if they will fit the Mickey Thompson Classic Baja Lock, 17x9 with 5 on 5 Bolt Pattern - Matte Black part number M/T90000020086

A: Hello bigchevy45, Thank you for the question. Yes, the Mickey Thompson Classic Baja Lock, 15x12 with 5 on 5.5 Bolt Pattern - Matte Black M/T90000020071 will fit with a 35x12.50R15LT Super Swamper SSR tire.

A: Hi Jimbo This rim will fit your 1999 Toyota 4runner thank you

A: Hello rankmammana3, Yes, the Mickey Thompson Classic Baja Lock, 15x10 with 6 on 5.5 Bolt Pattern - Matte Black M/T90000020070 will fit your vehicle application. Thank you for the email,

A: Thank you for your question. The Ring is non-removable on the Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part number M/T90000020089

A: Thank you for your question. The Mickey Thompson Classic Baja Lock, 15x12 with 5 on 5.5 Bolt Pattern - Matte Black has a non-removable ring.

A: Thank you for your question. Yes the Mickey Thompson Classic Baja Lock, 16x10 with 8 on 170 Bolt Pattern - Matte Black part number M/T90000020083 will fit your truck as the bolt pattern is 8 on 170

A: Thank you for your question. No the Mickey Thompson Classic Baja Lock are only offered as a Matte Black wheel and machined 'beadlock' ring

A: Hi Butch We have a wide selection of 13.5 and wider tires in a 33" od to fit the 15" x 12" wheel. Here is a listing of the 33 x 13.5/15 tires that we have http://jo.my/hmlh4p and here is a a listing of all 33" tires for a 15" wheel http://jo.my/gtnm0t Thank You

A: Butch- Happy to help. I would run a 33x12.50R15 like the new Pro Comp Xtreme MT2. You can find them here http://jo.my/nqiorv

A: Butch- Thanks for the inquiry. The Lip Size on this Mickey Thompson Classic Baja Lock, 15x12 with 6 on 5.5 Bolt Pattern in Matte Black should be roughly 5 inches depending if you include the step.

A: Thank you for your question. The Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black part number M/T90000020045 does come with a center cap but does not come with the lug nuts. Here is a link to the lug nuts that we have http://jo.my/lugnut

A: Hello Dale, Yes, the Mickey Thompson Classic Baja Lock, 15x12 with 5 on 5.5 Bolt Pattern - Matte Black M/T90000020071 will fit a 1979 Ford Bronco. Thank you for the email.

A: Thank you for your question. The Mickey Thompson Classic Baja Lock wheel is only offered in a Matte Black finish.

A: Thank you for your question. The Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black part number M/T90000020045 will fit a 35x12.5x15 tire.

A: Thank you for your question. The Mickey Thompson Classic Baja Lock, 15x10 with 5 on 5.5 Bolt Pattern - Matte Black part number M/T90000020049 will fit your Suzuki Jimny, from what i can see the bolt pattern is a 5 on 139.7 for 1998 to 2013

A: Mike- Thanks for the question. Yes you can reuse your stock lug nuts.

A: Thank you for your question. The Mickey Thompson Classic Baja Lock, 17x9 with 6 on 5.5 Bolt Pattern - Matte Black part number M/T90000020089 will fit your 2013 Toyota FJ Cruiser. The "5.5 bolt pattern," can also be said as 139.7.

A: Thank you for your question Shaun. The Mickey Thompson Classic Baja Lock, 15x8 with 5 on 4.5 Bolt Pattern - Matte Black part number M/T90000020045 will work with a 31x10.50R15 tire.