Hypertech Max Energy Power Programmers

A: Fuel Management Systems "V4/V8 mode" For improved fuel economy, vehicle manufacturers have developed V4/V8 modes. Chrysler & Dodge vehicles use the Multi-Displacement System (MDS) and GM has the Active Fuel Management System (AFM). These systems allow the engine to turn into a fuel sipping 4-cylinder during light load conditions such as steady speed cruising. We perfected the engine efficiency in V4 mode for both regular and premium octane. These systems have major benefits in fuel economy, but with a sacrifice in drivability when in V4 mode, and during the transition to V8 mode. The Max Energy allows you to adjust the minimum speed at which the V4 mode activates. Adjusting the minimum speed higher would prevent the V4 mode from activating while the road noise is low and V4 exhaust note is noticeable. Activating at a higher speed would allow for full benefit of the Max Energy 2.0 engine tuning in V4 and V8 mode at those higher speeds where the exhaust sound isn’t as noticeable. The V4/V8 mode can also be disabled completely as well.

A: It's always best to get Year, Make, Model and engine. I need the year and make to answer this question. Toll Free: 1-877-474-4821

A: The 2010 Colorado 5.3L V8 is not a supported application.

A: Hello Mike, No, the Hypertech Max Energy Power Programmer is a pre-set tuner. Thank you.

A: Hello Dirty, According to Hypertech you will gain 10 hp running 87 octane and 14 hp running 91 octane.

A: What is the year make and model of the vehicle you are installing this on?

A: Scott, The approximate gains are 25 HP and 40 TQ. And is the correct programmer for your year truck good in stock and ready to ship. Thank you for your question.

A: Sir, Power gains are 16 horse power and 18 torque, and it is a 50 state legal programer. Thank you for your question.

A: Sir, unfortunately you wont be able to deactivate the amf on your vehicle with this programer. Thank you for your question.

A: Hello Jesse, the Hypertech Max Energy Power Programmer will fit a 2010 Ford f-150 with the 4.6 motor. Thank you for your inquiry.

A: Hello Walter, Thank you for asking. The Hypertech Max Energy Power Programmer will give you Premium Octane: +18HP +16TQ Regular Octane: +11HP +10TQ

A: Hello Mike and thank you for your question! Hypertech Max Energy Power Programmer will give you more horse power, more pounds of torque and will give you better gas mileage.

A: Hello, This Hypertech Max Energy Power Programmer HYP32500 is the correct part # for your Tahoe.

A: Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello Berry, Thank you for asking. The Hypertech Max Energy Power Programmer part# HYP32500 will work on your vehicle.

A: Thanks for the question. Hypertech Max Energy Power Programmer HYP32501 This programmer will give you a performance upgrade. How much will depend on the vehicle it is going on. On the Auto Fuel Management it will depend also on the vehicle it is going in weather it will turn it off or not. Thanks you.

A: Hello,Thanks for the question.Part # HYP32501 will work on your 2014 GMC Sierra 1500.

A: Sorry this will not change how you can lock up the lockers.

A: Hypertech claims that the Hypertech Max Energy Power Programmer gets 11hp and 30tq on premium fuel and 9hp with 20tq on regular fuel. Hope this helps!

A: Hello Ryan. The Hypertech Max Energy Power Programmer, part # HYP52501, does not allow any adjustments on the MDS. Thank you

A: Hello Yes that is the correct unit for your Yukon. It will do all the major functions on your Yukon speedometer correction, top end limiter, transmission shift points, power tuning, and the unit can be upgraded over the internet.

A: Bear,Thanks for the question.This will work on your 2014 Ford F150 FX4 3.5L ecoboost & it will correct the speedo and shift points.This is in stock ready to ship.

A: Mr.Potter,Thanks for the question.Part # HYP52501 will come with proper cord & is ready to plug & play.Hypertech Max Energy Power Programmer is very simple to use and has all these different settings that will benefit you.

A: Thanks for the inquiry Cliff, the Hypertech Max Energy Power Programmer part # HYP32501 this is not correct, you'll need HYP52501.

A: Twoshotbaker, Thank you for asking. Here are the features that Hypertech Max Energy Power Programmer part# HYP52501 has. Automatic Transmission Adjustments Shift Firmness Increase shift firmness to maximize performance or when towing, to reduce clutch slippage and transmission oil temperatures. That means longer transmission life. However, this feature must not be used If you have installed an aftermarket shift kit. Shift Points The Max Energy allows you to raise or lower the shift points in 100 RPM increments for maximum performance, quicker acceleration, and better 1/4-mile times. With the Max Energy Power Programmer, you have the ability to customize the shift points for every gear. Optimizing each shift point can definitely improve performance. If you are looking for better fuel economy look into this http://jo.my/ctrvvk

A: thanks for the inquiry buddy, the Hypertech Max Energy Power Programmer part # HYP32501 will work on a jeep wrangler 3.8L up to a 2010.

A: Hello tomb76131, Thank you for the question. The Hypertech Max Energy Power Programmer Part Number: HYP52501 will help remap the fuel and timing of the vehicle. This will tap into the vehicles factory hidden power with a few simple adjustments.

A: Larry- Thanks for the question. Exactly how much power the Hypertech Max Energy Power Programmer will give you will depend on the condition of your truck.

A: Bigo- Thank you for your question. The Hypertech Max Energy Power Programmer will not fit your 2013 F250 with a 6.7 diesel. I would recommend the Edge tuner found here http://jo.my/8d5x4j

A: Matt- Thanks for the question. Certain features are unavailable in certain model Jeeps. The Transmission adjustment feature is not available in Jeep Cherokee XJ's and 3 Speed TJ's.

A: JF- Thanks for the question. The Jeep computers do not have the capability to support on the fly programming for any tuner. Hypertech's horsepower claims are with premium fuel on a dyno.

A: Hello Christopher , Thank you for the question. Yes, the Hypertech Max Energy Power Programmer HYP42501 will fit your vehicle application.

A: Hello bood, Thank you for the question. Chevy does not offer a V6 for the 2005 Colorado. It's either a I4 or a I5 motor. Either way this item will not fit that application.

A: Cody- Thanks for the question. According to HYpertech this is the correct part number Max Energy Power Programmer for your 1996 Ford F-150 XLT with a 5.8L

A: wkdehus- Thanks for the question. The Hypertech Max Energy Power Programmer is a good start for your 2003 Dodge Ram 2500 5.9L Diesel. I would recommend a good cat back exhaust like you can find here http://jo.my/59inkj and an intake system like these http://jo.my/v4pdoc

A: Robert- Thanks for the question. According to Hypertech the rev limit and shift points are programmable on your 2011 Chevy Silverado 1500 5.3L.

A: The Hypertech Max Energy Power Programmer will net you an increase in fuel milage but exactly how much will depend on the condition of your truck and any other modifications you have made.