A: Hello Rayzur, I personally think that it would be not advised to use it on Jeep OEM bumber styles for at least the 2007-2017 years. Most of these bumpers are covered with plastic pieces that can slip and slide and that would be too dangerous. I think it works and it is designes primarily for steel bumpers that can hang on the leverage hand. Hi-lift also make an adapter that you can put on the jack so it can be used with a more agressive curved metal bumper. If this is your first time using an Hi-lift jack, there are some tutorials you can look over on Youtube. It’s really important to know how they works and to use it in a safe manner.

A: This mounts to the hook on a Hi-Lift Jack.

A: Not a 100% sure. Smittybilt thinks the mounts are the same.

A: Looks like this will work on a 95 4Runner stock wheel, that have a spoke style.

A: It's a little bit hard to say not knowing what vehicle and cover you are using. Feel free to contact Hi-Lift direct at https://hi-lift.com/contact-tech-support/

A: The JP-350 is essentially a carrying bag for the jack. It's best used when the jack is stored on the inside of the vehicle. For exterior protection, we would recommend part number RGJC. https://www.4wheelparts.com/p/hi-lift-jack-running-gear-cover-rgjc/_/R-BJDH-RGJC

A: This Hi-Lift mount and lock can be mounted horizontally or vertically on your Tacoma. It will not work with a Snug Top lid cover that uses the bed rails. This mounts on the bed rail so it might interfere with your cover or its mounts.

A: Hello, we'd need a part number to see what trail jack you have. This specific part is for standard Hi-Lift jacks but can possible work. Another option we have is the ARB Jack Base (Part Number:10100111). Please call our Sales & Support team at 855-554-2400, they'll help find a suitable option for your trail jack.

A: Hello Cotton, The prices are posted on the product page above the Red Add to Cart button on the upper right hand side. Thank you.

A: Hello It is mainly to lift by the rims to get unstuck. If you add that to the jack you may end up not having a tall enough jack to get the tire off the ground.

A: Thanks for the question. Hi-Lift Jack Lift-Mate H/LLM-100 Yes, these will work with your wheels. Thanks you

A: Hello the lock portion can be mounted on any part of the I-beam best toward the end. The small bracket hooks into the base plate that would be mounted to any flat surface. I wasn't sure if you wanted to mount to a rear bumper, tailgate, or rear tire carrier you already have.

A: Hello George and thank you for your question! Hi-Lift Jack Jack Repair Kit will repair your Hi-Lift jack.

A: Derrick, Thanks for the question. H/LLR-200 will allow you to mount a High LIft jack horizontally on the hood of my 2000 Jeep Wrangler.

A: Yogy from Pinellas park fl, Thanks for the question.Hi-Lift Jack Loc-Rac part #H/LLR-200 you can mount your hi lift jack to your jeep xj hood.

A: Hi tanfogleman Yes this will help to mount your jack horizontally on many roof racks thank you

A: Don- Thanks for the question. The Hi-Lift Loc-rac will not work with a BakFlip G2 tonneau cover on your 2011 Ford F-150.