Hellwig Sway Bar Kits

A: Hello, For a no lift setup you will need hellwig part number HEL7684. If you have anymore questions feel free to ask, Thank you.

A: Hey KC, if you are wanting a Hellwig Sway Bar for a 2.5 inch lift you would just use the no lift sway bar which is part number HEL7684. Thanks for your question.

A: Hi Steve, This Hellwig Front Sway Bar includes the bar, links, bushings and hardware. Thank you for your inquiry.

A: Hi KC THE OLDMAN, This Hellwig Sway Bar is intended for the tall lifts, 4" or higher, so we would suggest a different sway bar. Here's the correct one, thanks for your inquiry.http://www.4wd.com/Jeep-Suspension/Rear-Sway-Bar.aspx?t_c=1&t_s=101&t_pt=4608&t_pn=ACO285

A: Hello Hank, I would highly recommend installing the Hellwig 1-1/8 Inch Rear Sway Bar Part Number: HEL7705 and the Hellwig 1.5 Inch Front Sway Bar Part Number: HEL7704 to help eliminate the body roll and control the cornering. Id also suggest the Fox Racing Shox 2.5 Factory Series Coilover Reservoir Shocks Part Number: FOX880-02-634 and Fox Racing Shox 2.5 Factory Series Reservoir Shock Set Part Number: FOX883-26-002 to really keep the tire patch in contact with the ground. I hope that helps. Thank you for the question.

A: Hello Glass Guy, Yes, the Hellwig Sway Bar HEL7271 will fit the rear of your vehicle application. However, you will need to make a set of links for the 6" lift. This kit will only for stock height vehicles. Thank you for the question.

A: Hello Big Mike, Yes, this will fit your vehicles configuration. Thank you.

A: Hello nuckfan, Yes, the Hellwig Sway Bar; Rear; 1 1/8 in. Bar Dia.; Fast/Easy Bolt On Installation; HEL7705 will fit with a small leveling kit. Thank you.

A: Hello Aart, The Hellwig Sway Bar comes with all necessary hardware and complete set of instructions.

A: Hello Big D and thank you for your question! Hellwig Sway Bar will improve body role.

A: Hello Et, the Hellwig Sway Bar part# HEL7677 will definitely prevent a lot of the sway you are currently getting. This bar is thicker and stiffer than the factory bar (if you have one). So it will help with heavy loads. Thank you for your inquiry.

A: Hello JJ, The Hellwig Sway Bar is not the correct part number for your truck. You will need part number HEL7676 for your 2006 F250 front.

A: Hello dubnasty216, The Hellwig Sway Bar will work on your truck with a 4"lift

A: Lucky- Thanks for your question. We do not send the Hellwig Sway Bar hardware seperatly. We do sell sway bar mounting pieces from day star. They are application specific.

A: Hello Rob, Thank you for the question. If the factory sway bar has a minimum of 1" clearance between the air bags and all of the connecting components, this will fit your vehicle.

A: Rob- Thank you for your question. You should not run into any interference issues with the installation of the Hellwig Sway Bar on your 07 2500 hd with firestone air bags.

A: 97-1500, You will need to order the bushing rebuild kit part # HEL125000853

A: This Hellwig Rear Sway Bar does attach to the frame, but you will not need spacer blocks. You will need extended sway bar links which can be found here: http://www.4wd.com/Jeep-Lift-Kits-Jeep-Lift-Kits-Suspension/Extended-Sway-Bar-Links.aspx?t_c=1&t_s=101&t_pt=4306&t_pn=BSS4WD100 Thanks!