The Poison Spyder JK Light Bar Mount is an easy, great-looking way to mount a Rigid Industries 50" E-Series or SR-Series LED light bar over the windshield of your Jeep JK Wrangler. This Light Bar Mount is CNC laser cut from 3/16" thick plate, then precision brake-formed and finish welded. The contoured, gusseted design provides the strength need to hold the massive Rigid 50" light bar securely in place on the highway or in rough terrain. Installation is simple, using the existing lower windshield bracket bolts. Rubber liners are provided to protect the Jeeps paint underneath the mounts. Mount is shipped as bare steel, ready for you to paint or powder coat in the color of your choice. Light up the night with Trail Master LED Light Bars! Trail Master LED Light Bars provide high quality at an affordable price, and are available in a variety of sizes to meet any need. Constructed from a durable, waterproof (IP67) die-cast aluminum housing, Trail Master LEDS can tackle the harshest environments. When you need to light your way, Trail Master LED Light Bars will help you find it on even the darkest nights. The new Explorer Series high intensity LED light from Pro Comp sets the standard in lighting efficiency. All Explorer Series LED lights feature a 50,000 + hour life span, ultra-high lumens/watt, in a durable IP 67 housing and shockproof 3800 polyester powder coat case. Installation is easy, and every Explorer light comes with everything you need to get your light installed and wired: wiring harness, switch, relay, and 2 sets of mounting brackets and mounting hardware. The innovative design provides increased visibility in even the darkest of driving conditions. Whether you are close to home, or far off the beaten path, count on Explorer to light the way! The system utilizes automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity! The sPOD SourceSE is a fully programmable digital CAN-Bus controlled system utilizing state-of-the-art technologies. OEM vehicle specific simple installation hardware, engineered and 100% manufactured in the United States. Features: Fully programmable Digital controlled system. Eight circuits rated @30amps @12.5vdc per circuit that are End-User friendly terminal block for attaching accessories. Expandable (Daisy Chained selectable) to up to 32 circuits with simple plug-n-play features! Low voltage cutoff (LVCO) battery protection circuit has spec voltage cutoff at 11.2 VDC with a two-minute delay before shutting down the SourceSE. This is useful when you have accessories turned on while the vehicle is not running. When the vehicle starts, the accessories can then be used again. The low voltage battery protection circuit can be turned off with the DIP switches. No more worrying about what rated fuse to install! The system will protect from 1.5 amps to 30 amps automatically. The SourceSE incorporates a failsafe self-healing fault protection system. Fuses have been eliminated (for all accessory outputs) and replaced with current-sensing MOSFETs controlled by a microprocessor. This is a great feature for low maintenance and troubleshooting. Two circuits (switches 1 and 2) have the option to be activated by an ignition switched power source (great for accessories that you DO NOT WANT to turn on unless the ignition key is on). These two circuits can be easily changed to this option by a simple DIP switch setting on the SourceSE and running a jumper wire to tap into a fuse that is only activated when the ignition is on. The same two circuits can also be used as High-Beam activated circuits by tapping into the input side of one of the headlights high-beam circuits. We have taken care of the PWM issue with the headlight circuits. Shield receptacle for the optional Bluetooth module for a plug-n-play end-user upgrade. This creates a scalable platform for future optional enhancements. One single ATM mini-style fuse for LVCO protection and reset. Mix-N-Match with the touchscreen. The new switch panel has 8 switches. This panel uses an Ethernet cable that interfaces with the Source with a RJ-45 plug on both ends. Standard cable length will be 10 feet.
Manufacturing products exclusively for Jeeps, Genuine Packages carries front bumpers, suspension systems, LED light bars, receiver hitches and more. Upgrade your Jeep's bumpers with front and rear ones from Genuine Packages that are compatible with 2 and 4-door models. When you're looking for part replacements to get trail-ready for anything you encounter, products from Genuine Packages fit the bill. We carry a full lineup of interior and exterior items. Forget overpriced parts and accessories for Jeeps and go with products produced by Genuine Packages. Shop Genuine Packages Now