G2 GM 8.5 Inch 10 Bolt Front Axle Spindle - 99-2021-1

universal fit logo

Specifications

  • G2 Axle and Gear | Part Number: G/299-2021-1
  • Axle Location:Front
  • Fitment:Universal Fit
  • Axle Type:GM 10 Bolt 8.5 Inches

PRODUCT OVERVIEW

G2 has these high strength replacement spindles available for most popular applications. No more searching salvage yards only to find worn out spindles.

Customer Reviews

4.0
4.0 4.0
6 Customer ratings
5.0 Perfect fit

Perfect fit for my 1991 blazer, I'm definitely satisfied.


from Minnesota |
 
1.0 Big bearing won’t fit.

The big bearing doesn’t fit. I had to have it machined down for the bearing to fit.


|
 
5.0 Great fit

Excellent part that fits perfectly on my 81 k10. I was worried that it was not oem but worked great.


from Oklahoma City, Oklahoma |
 
5.0 very well trusted

Very well satisfied with the products an service ,would definitely use an order from here again just would like if I could receive some free stickers to advertise there company. An products..


from Salisbury n.c |
 
3.0 Works like a champ

The spindle worked great on my K20, surprisingly there was no damage to the spindles (I ordered 2) because of the packaging. I can't believe G2 would put a $100+ product in a box and ship it. No kidding, it was a spindle and a box. There were no peanuts, paper, thread protectors, bubble wrap, not even a plastic bag...pathetic.


from Bryan, TX |
 
5.0 Top Notch Product

Couldn't ask for a better replacment part. fully satisfied with it. only problem i had was getting the correct one.. part was listed incorrectly on 4wheel parts i contacted G2 and got Correct part # that i needed i had already installed the new ones on truck before i noticed they were for pre 76 i needed 77 up. 4wheel Parts took them back since they had listed them wrong but i was out inner axle bearings and time shop bay was blocked parts sent back on 10-16-12 had to call to get them to process the return so correct ones would be shipped received correct ones on 10-24-12. Charged me for the differance in price.. they did cover freight but could have been faster than ground from Cal.. to TN


from Blaine,Tennessee |
 

Similar

Question & Answers

11 Answered questions

Q: Will this spindle replace my old spindle that has F38127 J2R35 stamped on it? Answer this question

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821 * For Use On 1977-1991 GM K5 And Suburban 1/2 and3/4 ton | * For Use On 1977-1987 GM 1/2 and 3/4 Ton Truck | * Note: Need Dana Spicer Part# D/S706527x to make complete

Answered by Dave from 4WP HQ on 05/24/2022

Q: I swapped my 87 gmc v1500 rear end for a 95 chevy the studs are metric on the rear and my dana 44 are standard in the front. any chance this would allow me to swap to metric in the front to match? Answer this question

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

Answered by Brent from 4WP HQ on 03/17/2021

Q: I have a 1989 chevrolet silverado blazer V10 4wd and would this be a good match for driver side Answer this question

A: Yes! But it is a bare spindle. It needs a CROJ8127356 spindle bearing and seal kit to go with it. This equals the D/S706527X which has been on backorder for months.

Answered by Kelly from 4WP Corporate Headquarters on 03/04/2021

Q: I have a 1990 Ford F-150 4x4 and was wondering if this will fit my truck ? Spindle threads are bad on the one I have now  Answer this question

A: This is for GM trucks. We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

Answered by Brent from 4WP HQ on 11/02/2020

Q: I have an '84 Chevy K20 spindle with B38428M1R58 0614 stamped on the bolt circle rim, will this part work? Answer this question

A: Hello Yes this is the correct part for your K20 it works on the 1977 and newer trucks. You will need the D/S 706527x which is the inner spindle bearing and seal. Thanks

Answered by Rody on 03/22/2015

Manufacturer

G2 Axle & Gear uses the strongest and latest generation materials to manufacture products capable of handling heavy loads. When it comes to axle assemblies, core lockers, driveshafts and sway bars, G2 is the first name in durability and reliability. Off-roading can heap punishment on a Jeep and G2's laser-cut components offer superior handling on challenging terrain and on-road drives. Parts are easy to install and easy to service and above all, they remain operational in adverse environments. Shop G2 Axle and Gear Now

Promotions

Sign up to receive deals by email!

Sign up to receive deals by text!

By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy