G2 Axle & Gear Mini Spools

The product performs as advertised, locks up both wheels all the time. Installation was a different story. I am a certified mechanic, and this took me 3 hours to install. Every single mating surface except the holes in the blocks for the crosspin had to be ground down. Very poor machining. Lots of time spent at the bench grinder and with the angle grinder to get it to fit properly. I would recommend it, just be warned install is not as easy as advertised.

very easy to install and as strong as the stock carrier.

I use this product to make my both wheel turn at the same time not open anymore and cheap way to lock up instead buy a pricey locker. Only problem I had was it couldnt fit the c clip only if you take it to the professional I suggest, lathe the metal 1 1/2 cm off on the end of the part that goes on the axle shaft to make the c clip slide in not crooked or shaving off the clip to make it work. The best way is lathe trust me! i would recommend it to a friend only if they got the right tools

Easy to install and works fine